OSP Designs DEVONSHIRE WRITING DESK DVN2547 User manual

DVN2547
DEVONSHIRE WRITING DESK
OPERATING INSTRUCTIONS
LIMITED WARRANTY
OSP Designs Warrants, to the original purchaser its products to be free from defects in material and workmanship for a period of 90 days. Defects
and damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of OSP
Designs is not covered. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential
damages is excluded. The user assumes all risk of injury resulting from use of this product. This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.
To make a warranty claim, contact Customer Service, provide model number, sales receipt and description of the problem. It is the customer’s
responsibility to prepay freight on any components returned to the factory. OSP Designs will pay return freight on components covered under
terms of warranty.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when hardware is missing.
Our Parts Department will do everything possible to promptly remedy the problem. Contact us via email parts@officestar.net, by Fax
1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. OSP Designs P.O. Box
3520 Ontario, California 91761 USA.
WARNING
1. Do not use this product unless all bolts are securely tightened.
2. Check that all bolts are tight every three months or as needed.
3. Dispose of packing material properly. Do not use plastic cover
as head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. Intended for residential use only.
WEIGHT LIMIT
Desktop: 200 lbs. / 90.7 kgs.
Drawers: 30 lbs. / 13.6 kgs.

Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Place Desktop (1) on a flat, clean surface. Carefully pull drawers out of Desktop (1) by pulling up on drawer slide lever on one side and pressing
down on lever on other side. Attach Rear Legs (3L & 3R) to Desktop (1) using two Bolts (9), two Lock Washers (7) and two Flat Washers (6) for each Leg, DO
NOT FULLY TIGHTEN BOLTS. Insert one Wood Dowel (8) into each end of Rear Bar (4) and attach between Legs (3L & 3R) using two Wood Screws (10),
DO NOT FULLY TIGHTEN SCREWS.
DVN2547
DEVONSHIRE WRITING DESK
ASSEMBLY INSTRUCTIONS
© Office Star Products December 2013
PART QTY
1. Desktop ....................1
2. Front Leg (2L & 2R) ...........2
3. Rear Leg (3L & 3R) ...........2
4. Rear Bar ...................1
5. Side Bar ....................2
6. Flat Washer .................8
7. Lock Washer ................8
8. Wood Dowel ................6
9. Bolt .......................8
10. Wood Screw ...............6
11. Allen Wrench ...............1
STEP 1
3R
10 10
48
8
8
3L
9
11
11
7
6
1
9 67
IMPORTANT NOTE:
1. Use hand tools only for assembly as power tools may cause damage.
2. Carefully remove any staples used for packaging.
3. Phillips Screwdriver also needed (not provided).
STEP 2 Attach Front Legs (2L & 2R) to Desktop (1) using two Bolts (9), two Lock Washers (7) and two Flat Washers (6) for each Leg, DO NOT FULLY
TIGHTEN BOLTS. Insert one Wood Dowel (8) into each end of Side Bar (5) and attach between Legs (3R & 2R) using two Wood Screws (10), DO NOT
FULLY TIGHTEN SCREWS. Repeat for remaining Side Bar (5). Apply firm downward pressure to align. FULLY TIGHTEN ALL BOLTS AND
SCREWS. Turn assembly to the upright position. Pull drawer sliders on Desktop forward and attach Drawers.
ATTENTION: MAKE SURE ALL BOLTS AND SCREWS ARE FULLY TIGHTENED BEFORE USING DESK.
DVN2547
DEVONSHIRE WRITING DESK
ASSEMBLY INSTRUCTIONS
5
2L
2R
3L
11
8
5
8
8
8
3R
11
10
10
10
10
6 7 9
STEP 2
6
7
9