osprey video RM3G-2 User manual

User Guide
RM3G-2

1
FEATURES:
3RU rack mount monitor with two 7” displays
3G-SDI, HDMI, Component, Composite inputs with Loopouts
Tally
Loss of Signal
2yr Warranty.
Content
1. PRODUCT DESCRIPTION.............................................................................2
2. MENU SETTINGS................................................................................................3
3. ACCESSORIES.....................................................................................................7
4. SPECIFICATIONS................................................................................................7

2
1. PRODUCT DESCRIPTION
1．INPUT: Toggle between HDMI, Component, Composite and SDI.
2．MENU: To activate OSD (on-screen display) menu. Press to switch
among the brightness, sharpness, contrast, saturation, Tint, MENU
and Exit.
3．◄Left selection button: to select item on OSD menu and adjust its
value; Press to decrease the value of brightness, sharpness,
contrast, saturation and Tint.
4. ►Right selection button: to select item on OSD menu, adjust its
value and confirm it; Press to increase the value of brightness,
sharpness, contrast, saturation and Tint.
5．ENTER.
6．FN: Function button; to quick launch function menu
7．TALLY indicator light.
Note: Mini USB interface, and LAN port are for future use and
firmware upgrades
1. TALLY interface and interface definition.
2. Mini USB input (Only used for firmware upgrades).
3. 12V DC power input.

3
4. Mounting Hole for power cable clip for strain relief (to prevent
unintended unplugging of Power Barrel Connector
5. YPbPr inputs
6. YPbPr Loopouts
7. Composite input 8. Composite Loopout
9. HDMI input 10. HDMI Loopout
11. SDI input 12. SDI Loopout
13. LAN port. (Future Use)
2. MENU SETTING
Before setting the functions, please make sure the device is
connected correctly.
2-1. Shortcut buttons:
2-1-1. Image Menu
Power on, press “◄ / ►” buttons on the device, brightness display bar
will appear at the bottom of the screen, then press the MENU button to
switch between brightness, sharpness, contrast, saturation, tint, MENU
and Exit. User can adjust the parameters of the selected item with “◄ /
►”buttons.

4
2-1-2. FN user-definable function button
Press FN button to pop up the default options, Use “◄ / ►” buttons
to adjust the value of selected item.
Long press FN button for 3-5 seconds to pop up shortcut menu
directly. As shown in right Figure (default menu is
displayed in white font).
Use “◄ / ►” buttons to select the desired item.
Finally, use the “ENTER” button to confirm the
selected item as default.
Functions of FN button can be customized: Center
Marker, Safety Marker, Check Field, Color Bar, Aspect
Ratio, Camera, PIP, Image Flip, Zoom, Pixel-to-Pixel,
Freeze Input, Underscan, H/V delay.
2-2. MENU Operation
Press “MENU” button on the device after power on. The menu used
for setting function will display on the screen.
Press ◄/► buttons to select the sub-menu; then press ENTER to
confirm it; after that, press MENU to return to main menu.
2-2-1. Picture
ITEMS
OPTIONS
Brightness
0 - 100
Contrast
0 - 100
Saturation
0 –100
Tint
0 –100
Sharpness
0 –100
Color Temp
6500ºK, 7500 ºK, 9300 ºK, User
Red
Note: Available only in
“User” mode to choose
the color value you need.
Green
Blue

5
2-2-2. Marker
ITEMS
OPTIONS
Center Marker
ON, OFF
Safety Marker
OFF, 95%, 93%, 90%, 88%, 85%, 80%
2-2-3. Display
ITEMS
OPTIONS
Aspect Ratio
Full Screen, 16:9, 4:3, 1.85:1, 2.35:1
H / V delay
OFF, H&V Delay, V Delay, H Delay
Check Field
OFF, Mono, Red, Green, Blue
Pixel-to-Pixel
OFF, ON
Underscan
OFF, ON
Color Bar
OFF, ON
Zoom
OFF, ×2, ×4, ×6, ×8
Image Flip
OFF, ON
Freeze Input
OFF, Freeze
PIP
Small, Medium, Large, PBP, POP

6
2-2-4. DSLR Aux& Audio
ITEMS
OPTIONS
Camera
480P (5D-II Mode), 1080I (5D-ⅢMode)
2-2-5. System
ITEMS
OPTIONS
LOGO
OFF, ON
Language
English, Chinese
Manufacturer Default
OFF, ON
Back Light
0 –100
ISP
For program upgrades

7
4. Included ACCESSORIES
1. 12V DC Power Supply 1 piece
2. TALLY connector 1 piece
3. Power Cable Line Clip 1 piece
5. Specifications
Note: Due to constant efforts of product improvements,
specifications may change without notice.
Panel
7” LED IPS
Physical Resolution
1280×800
Brightness
400 cd/㎡
Contrast
800: 1
Viewing Angle
178°/ 178°(H/V)
Input Voltage
DC 7-24V
Input Signal
HDMI, YPbPr, SDI, Video
Power Consumption
≤18W
Operating Temperature
-20℃~60℃
Storage Temperature
-30℃~70℃
Dimension (LWD)
482.5×133.5×25.3mm
Weight
2885g