4
• Use a minimum of four stands to support and stabilize a
vehicle, and a minimum of two additional stands for each axle
assembly, before starting repairs.
• The vehicle shall be raised only once to place vehicle support
stands under the entire vehicle.
• Ensure stands are stable and vehicle is balanced before
lowering the vehicle onto stands.
• Carefully lower the vehicle onto all stands simultaneously.
• Do not apply horizontal forces or large torque loads to vehicle
while the vehicle is supported on stands.
Under Hoist Auxiliary Stands
• These stands are intended to provide partial support of
vehicle components during removal and installation.
• Adequately support the vehicle before starting repairs.
• Do not use to support or stabilize vehicle.
Safety Information
Shop Equipment Recommendations
As with any tool or piece of equipment, it is highly recommended
to follow all applicable safety guidelines pertaining to its
use. Appropriate Personal Protective Equipment as outlined
by OSHA and ANSI standards, include (but are not limited
to) safety glasses or face shields, protective gloves, hearing
protection and reinforced (or safety toe) footwear. While using
tools and equipment, ensure that you are clear of any moving
parts or potential pinch points. To ensure the continued safe
operation of tools and equipment, always follow manufacturer’s
recommended cleaning and lubrication schedules to prevent
foreign material build up.
(continued)
