oticon ConnectLine TV Adaptor User manual

ConnectLine™TV Adaptor Quick Guide
for Output Jack Setup
Power Outlet
TV Cord
Streamer & Pairing
Alternative Connections:
Use the Audio Jack Adaptor or Microphone (Box
3) if the audio output jack is not available. See
enclosed bookletf or installation instructions.
STEP 1: Plug the
power adaptor into
the power source.
STEP 1: Locate
audio output jacks
on back of TV
(typically labelled
Audio Out).
STEP 1: Place
Streamer close
to adaptor. Press
pairing button until
blue light flashes
rapidly.
Audio
Headphone Jack
STEP 2: Plug the
TV cord into the
output jacks as
shown.
STEP 2: Plug the
power cord into
the power adaptor
marked A.
STEP 2: Pairing
is complete when
orange status light
on TV adaptor
comes on (about 1-2
minutes).
STEP 3: Plug TV cord into adaptor marked B.
STEP 3: The TV
adaptor can be
mounted to the
TV with the Velcro
provided.
STEP 3: The light
will be green when
power is on.
S
TV Microphone
TV Adaptor
Power Cord
For more detailed instructions
please see the Installation Guide
enclosed with your system.
TV cord
Streamer
Pairing
button
Box 1
Box 2
Box 3
NOTE: Before
pairing, charge
Streamer or
attach to power
supply.

Power Outlet
Phone Cord Connection
Streamer & Pairing
STEP 1: Plug
power adaptor into
power source.
STEP 2: Plug the
phone line into Phone
adaptor marked LINE
(black socket).
STEP 1: Place
Streamer close to
adaptor. Press pairing
button until blue light
flashes rapidly.
STEP 2: Plug the
power cord into the
power adaptor as
shown.
STEP 1: Unplug phone
line from the phone or
cordless phone base
station.
STEP 2: Press red
button (A) on Phone
Adaptor until red status
indicator is flashing (B).
After 5-10 sec both
the red light (B) and
the blue (C) will be
constant. Blue light will
then fade to off (C).
STEP 4: Plug the Tele
Cord into the Phone
Adaptor marked PHONE
(yellow socket).
STEP 5: Plug the
other end of the Tele
Cord into the phone
or base station.
STEP 3: The light
will blink red when
power is on.
STEP 3: Other end
of cord remains in
the wall jack.
Ph
C
d
C
t
i
Phone Adaptor
Power Cord
Tele Cord
Box 1
Box 2
ConnectLine™Phone Adaptor Quick Guide
for Output Jack Setup
For more detailed instructions
please see the Installation Guide
enclosed with your system.
Streamer
NOTE: Before
pairing, charge
Streamer or
attach to power
supply.
Pairing
button
A
A
B
C
STEP 3: Verify pairing by pressing the phone
button (A) on streamer. The red status button
will flash (B).
B