Panasonic WX-SR202P User manual
Operating Instructions
Included Installation Instructions
Wireless Receiver
Model No.
ENGLISHFRANÇAIS
Safety precautions
WARNING:
FCC Caution:
ENGLISH
Descriptions of graphic symbols
Safety precautions
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
Product overview
System overview
■
■
■
■
Safety precautions
Related devices
ENGLISH
Limitation of liability
Disclaimer of Warranty
A
B
C
D
E
Copyright
Safety precautions
Open source software
Copyright, etc.
ENGLISH
Network precautions
Abbreviations
Table of contents
Safety precautions……………………… 2
Precautions ……………………………… 11
Usage precautions……………………… 13
Parts and their names ………………… 15
Installation ……………………………… 20
Connections …………………………… 25
Installing antennas …………………… 30
Settings…………………………………… 36
Pairing …………………………………… 44
How to use ……………………………… 48
Support software ……………………… 53
Dimensions ……………………………… 55
Troubleshooting ………………………… 56
Specifications …………………………… 57
ENGLISH
Precautions
Entrust building operations to a retailer
Tighten screws and bolts with the specified tools
Plug the power plug all the way in
Directly grab the plug to remove the power cable from the socket
Use the specified fuses
Turn the product OFF before performing maintenance
Regularly remove dust from the electric plug
If the product shows any abnormality, immediately stop using it
Do not attempt to repair or wire the product while it is turned ON
Do not pull on cables and other components
Do not damage the cables
Do not use near flammable gases
Do not install the product where there is a risk of damage from seawater or
corrosive gases
Do not install at places exposed to large amount of humidity and/or dust.
Precautions
Do not place on unstable surfaces
Do not use where there is a risk of exceeding the maximum recommended
wattage for the socket or the wiring, and only use 120 V current
Do not let foreign substances into the product
Avoid damaging the power cord and power plug
(by breaking them, tampering with them, bringing them near heat sources,
bending them excessively, twisting them, pulling on them, placing heavy
objects on them, tying them, etc.)
Do not insert or pull the power plug with wet hands
Do not attempt to disassemble or remodel the product
Do not wet
Do not place containers full of water or other liquids on or near the product
Do not perform the installation and wiring work during a thunderstorm
ENGLISH
“Precautions”
This product is intended for indoor use only
Use this product with care
The operating temperature range is
The power switch
Microphone remaining battery level indication
When turning the power switch to ON or OFF
Usage precautions
Power
The receiver uses AC 120 V (60 Hz) power. Connect the receiver to an enough capacity
power source.
Connect the power cord to the power source in one of the following ways.
Install the receiver near the electric outlet, allowing for easy access to the power plug.
Connect it to a breaker panel with at least 3.00 mm (1/8 inches) of space between
contacts. Use a breaker which can cut off power from all poles except the protective
ground connection.
Usage precautions
Network security
memo
Important
System start-up time
When not using for an extended period of time
Condensation
Maintenance
ENGLISH
Parts and their names
A B C D E F G H
I
J K
L
M
ON
APower switch [POWER]
BPower indication (green)
CSwitch cover
DEF
DConfiguration switches (behind switch cover)
EConnector for configuration and maintenance [SET] (behind switch cover)
Parts and their names
FMain system indicator [MAIN] (green) (behind switch cover)
GAntenna indicators [ANTENNA 1/2/3/4/5/6/7/8]
memo
Important
HSynchronization indicator [SYNC] (green)
memo
Important
IExternal remote indicator [REMOTE]
ENGLISH
JReception level indicator [RF LEVEL]
KAudio level indicator / mute status indicator [AUDIO/MUTE]
LVolume adjustment knob [VOL 0, 10]
MMicrophone remaining battery indicator [MIC BATT]
Parts and their names
NPairing button
OPairing indicator [REG]
ENGLISH
P Q R S T
PNetwork connector [100BASE-TX]
QWireless antenna connectors [ANTENNA 1/2/3/4/5/6/7/8]
RChanneloutputconnectors[CHOUT-10dBV600Ω1/2]
SExternalinputconnector[AUDIOIN-10dBV600Ω]
TMixoutputconnector[MIXOUT-10dBV600Ω]
SIGNAL GND connector [SIGNAL GND]
Power cord
Installation
■Installation precautions
Warning
When installing this product, follow all official ordinances on electrical equipment
technical standards.
This product is intended for indoor use only
Turn the product OFF to install it
Installation place
Other manuals for WX-SR202P
1
This manual suits for next models
1
Table of contents
Languages:
Other Panasonic Receiver manuals
Panasonic
Panasonic AG-IA232TC-E User manual
Panasonic
Panasonic SC-HT270 Operating User manual
Panasonic
Panasonic RF -4800 User manual
Panasonic
Panasonic KX-R60 User manual
Panasonic
Panasonic CQVA70EU - CAR AUDIO/VIDEO SYS User manual
Panasonic
Panasonic SAXR25 - DIGITAL A/V RECEIVER User manual
Panasonic
Panasonic SAHE9 - RECEIVER User manual
Panasonic
Panasonic BL-PA100A - HD-PLC Ethernet Adaptor User manual
Panasonic
Panasonic SAHE9 - RECEIVER User manual
Panasonic
Panasonic EX7 User manual
Panasonic
Panasonic WVRC100 - BROADCAST RECEIVER Operating instructions
Panasonic
Panasonic SAHE7 - RECEIVER User manual
Panasonic
Panasonic CF-AA Series User manual
Panasonic
Panasonic QTR 2140 User manual
Panasonic
Panasonic LUMIX DMW-XLR1E User manual
Panasonic
Panasonic Ramsa WX-RP810 User manual
Panasonic
Panasonic CZ-CAPRA1 User manual
Panasonic
Panasonic SAXR57 - RECEIVER User manual
Panasonic
Panasonic WJNT204 - NETWORK IF UNIT User manual
Panasonic
Panasonic PressIT TY-SB01WP User manual
