OttLite ClearSun CSLT000W User manual

ClearSun®LED Light Therapy Lamp
CSLT000W P L- 0 17 9
THANK YOU!
We hope you enjoy your new OttLite product.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product Registration Form and
return it today by mail.
NOTE: THIS UNIT IS FULLY ASSEMBLED
1. Remove product from packing, placing base (A)
horizontally or vertically on a steady surface.
2. Connect power adapter input (B) into connector (C) in the
back of the product.
3. Plug the power adapter (D) into a standard household
120V AC outlet. NOTE: Only use with the supplied
power adapter to avoid damage or fire.
TURN LAMP ON/OFF; CHANGE BRIGHTNESS:
The power switch (E) is a “touch” switch that controls
the dimmer function for 3 levels of brightness. To power
LED settings, slightly touch the switch to achieve the
following:
• To turn lamp “ON” to first lower-brightness; touch the
switch “once”.
• For medium-brightness; touch the switch “twice”.
• For high-brightness; touch the switch “three-times”.
• To turn lamp “OFF”; touch the switch “four-times” .
REPOSITION THE STAND(HORIZONTAL/VERTICAL):
• To remove the stand (F), Slide the stand down and
remove from base. When the light is not in use, place
the stand back in this position for easy storage.
• To use the light in the vertical position, insert the stand
into the lower slot (G) and slide up into place as shown.
• To use the light in the horizontal position, insert the
stand into the center slot (H) and slide up into place as
shown.
ABOUT LIGHT THERAPY
According to the National Institute of Mental Health (NIMH),
Light Therapy is one potential treatment of SAD (Seasonal
Affective Disorder) also known as the “winter blues”. The
NIMH recommends talking to your health care provider
about which treatment, or combination of treatments, is
best for you.
• Light Placement: Position from 6 to 20 inches from your
face at a 30 to 45 degree angle from your eye line (not
directly in front of your eye line). Though you
should not look directly into the lamp, the light should be
in your field of vision.
• Time of Day: The Mayo Clinic recommends using in the
morning so sleep patterns are not disrupted.
• Length of Time: Studies show exposure from 20 minutes
to an hour is effective. However, personal preference
and experience with light therapy is the most important
indicator.
- Start with 20 minutes on the highest brightness
setting at any distance that feels comfortable to you.
- Take note of how you feel and keep adjusting the light
distance, brightness and timing (up to one hour) until
you experience desired results.
• Feeling tired? Sit closer to the light for longer.
• Feeling overstimulated? Reduce the time and/
or move light farther away.
WARNING: People who are sensitive to light, people with
certain eye diseases or people taking certain medications
that increase sensitivity to sunlight may need to use
alternative treatments or use light therapy under medical
supervision, according to NIMH.
Product not intended for use by children. Close
supervision is recommended when used near children. Do
not leave unattended near children or others who may not
properly comprehend the correct usage of the product.
For more information on SAD and light therapy, please
visit www.ottlite.com/LightTherapy
G
E
A
C
B
D
INS-21-0640 REV050321
ClearSun® LED Light Therapy Lamp
H
F

SAFETY WARNING: TO REDUCE THE
RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
1. Never use with an extension cord unless the plug can
be fully inserted into the receptacles in the extension
cord.
2. Do not alter the plug.
3. INDOOR USE ONLY.
NOTE: The important safety instructions appearing in
this instruction sheet are not meant to cover all possible
conditions and situations that may occur. It must be
understood that common sense, caution, and care must be
used with any electrical product.
CAUTION! IF THE EXTERNAL FLEXIBLE CABLE
OR CORD OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE
EXCLUSIVELY REPLACED BY THE MANUFACTURER OR ITS
SERVICE AGENT OR A SIMILAR QUALIFIED PERSON IN ORDER
TO AVOID A HAZARD. INDOOR USE ONLY.
FCC PART 15
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that the interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that of the receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
IC CANADA
This device contains licence-exempt transmitter(s)/
receiver that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including
interference that may cause undesired operation of the
device.
CAN ICES-005 (B) / NMB-005 (B)
CAUTION: Any change or modification to product not
expressly recognized by OttLite Technologies voids
OttLite’s responsibility for proper function of product.
POWER ADAPTER SPECIFICATION:
Input: 100-240 V~, 50/60 Hz, 0.6A
Output: 18V, 0.65A with a Male DC Plug
INS-21-0640 REV050321
ClearSun® LED Light Therapy Lamp