Outbac Otb300 User manual

Cordless Multi-Purpose

Air Compressor OTB300

User Guide [Revision 3.0 July 2018]

Safety

Read and understand this user guide before using the equipment. Retain the user guide for future reference.

Any damage or equipment failure due to incorrect usage is not covered by warranty.

• Always wear ANSI approved safety goggles when working with tools and equipment.

• When inflating tyres etc, do not exceed the pressures recommended by the manufacturer.

• Do not submerge the device as damage to the unit may occur.

• Always monitor inflation to avoid over-inflation or bursting of the inflated item.

• If inflation time exceeds 3 minutes be aware that some parts of the device may become hot.

Overview and Controls

The OTB300 is designed for general domestic inflation tasks, and includes additional functions:

• Standard vehicle 12VDC charging (charging cable / adaptor included).

• Programmable inflation pressure - automatically stops when required pressure is reached (Schrader type

plus 3 additional valve adaptors included).

• Charging/powering USB devices.

• Battery charge indicator.

• Torch function.

Display

Inflation

ON / OFF

Air Hose

Torch / USB

Charging

Switch

Charging

Connector

USB

Connector

Battery Level

Indicator

Fault

Indicator

Valve

Adaptor

Pressure

Unit

Increase

Pressure

Decrease

Pressure

OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC

Operation

Note: Before use, ensure that all parts have been supplied and the battery is

fully charged. Initial charge may take up to 48 hours.

Connect the supplied charging cable to a standard 12VDC vehicle socket.

Connect the other end of the cable to the compressor Charging Connector.

When charging, the Battery Level Indicator flashes.

When fully charged, all 4 indicator lights will illuminate and remain on.

Charging the Battery

12VDC

Charging

Specifications

Unclip the Air Hose from the unit. Unlock and securely connect the Valve

Adaptor to the valve of the item to be inflated (X), then lock the adaptor. If

required, attach the necessary adaptor into the Valve Adaptor.

Press the Inflation ON / OFF button to turn the unit on - the compressor

may activate for a short period. If no other buttons are pressed, the unit

will switch off after several seconds.

Press the Increase Pressure / Decrease Pressure buttons as required

until the desired pressure is shown in the Display. If required, press the

Pressure Unit button to change the unit of measurement between PSI,

Bar, KPa and kgf.

Press the Increase Pressure / Decrease Pressure buttons

simultaneously to save the pressure setting. If no pressure setting is

saved, the previously saved setting is applied.

Press the Inflation ON / OFF button to turn the compresor on. When the

pressure is reached, the compressor automatically stops. Disconnect the

Valve Adaptor quickly from the inflated item to avoid pressure loss. The

unit will switch off automatically after several seconds.

Using the Compressor for Inflation

Press and hold the Torch / USB Charging button for 3 seconds to activate the torch.

When finished, press the Torch / USB Charging button once to deactivate the torch.

Using the Torch / Flashlight

Connect the USB device to the USB Connector using a standard USB

cable (not supplied). The battery must be charged to use this function.

Press the Torch / USB Charging button once to switch the USB charging

function on. If the unit has been used within the last 48 hours, USB charging

is automatic on conneciton of the cable - no need to press the Torch / USB

Charging button.

When finished, disconnect the USB cable from the USB Connector.

Using the USB Charger

The Fault Indicator may illuminate if the unit reaches an over-temperature or

over-current state. When in a fault state all functions are not available. When the

indicator is off, the unit can be used again.

Fault Indicator

Charging Voltage

USB Output

Maximum Inflation Pressure

Battery Capacity

Maximum Discharge Capacity

Certification

13 to 30VDC

5VDC 2A

150PSI

11.1V 2000mAh

<10A

FCC, CE (EMC and LVD), IC, RoHS

Torch

USB

Compressor

Locked Unlocked

Note: For the compressor to reach full charge (4 Bars) the car engine needs to be running. With the car engine

turned off there will only be 12.8v running through the unit’s charger, once the car engine is started the charge rate

will increase to around 14v and the battery will charge up to 4 bars.

OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC OUTBAC

Some experts believe that the incorrect or prolonged use of almost any product may

cause seriousinjury or death. To help reduce your risk of seriousinjury or death, refer

to the information below. For more information, see www.datastreamserver.com/safety

Consult all documentation, packaging and product

labelling before use. Note that some products feature

documentation available online. It is recommended to

print and retain the documentation.

Before each use, check the product for loose/broken/

damaged/missing parts, wear or leaks (if applicable).

Never use a product with

loose/broken/damaged/missing parts, wear or leaks.

Products must be inspected and serviced (if

applicable) by a qualified technician every 6 months.

This is based on average residential use by persons of

average size and strength, and on a property of

average metropolitan size. Use beyond these

recommendations may require more frequent

inspections/servicing.

Ensure that all users of the product have completed a

suitable industry recognised training course before

being allowed access to the product.

If this product has been purchased in error when

considering the information presented here, contact

the retailer directly for details of their returns policy, if

required.

The product has been supplied by a general

merchandise retailer that may not be familiar with your

specific application or description of application. Be

sure to attain third-party approval from a qualified

specialist for your application before use, regardless of

any assurances from the retailer or its representatives.

This product is not intended for use where fail-safe

operation is required. As with any product (for

example, automobile, computer, toaster), there is the

possibility of technical issues that may require the

repair or replacement of parts, or the product itself. If

the possibility of such failure and the associated time it

may take to rectify could in any way inconvenience the

user, business or employee, or financially affect the

user, business or employee, then the product is not

suitable for your requirements. This product is not

intended for use where incorrect operation or a failure

of any kind, including but not limited to, a condition

requiring product return, replacement, parts

replacement or service by a technician may cause

financial loss, loss of employee time or an

inconvenience requiring compensation.

diagrams or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

Table of contents

Other Outbac Air Compressor manuals

Outbac

Outbac OTB600 User manual

Popular Air Compressor manuals by other brands

Craftsman

Craftsman 919.155730 parts manual

Hitachi

Hitachi CA47TLA-D2PE3 manual

DV Systems

DV Systems G20 Installation and start-up data

Sealey

Sealey MAC01 instructions

DeWalt

DeWalt DXCMH1393075 instruction manual

Schneider Airsystems

Schneider Airsystems UNM 260-10-50 W Original operating manual

AMiO

AMiO YF651-2 user manual

North American Tool

North American Tool 51850 quick start guide

VIAIR

VIAIR 00071 user manual

Technaxx

Technaxx TX-129 user manual

Makita

Makita MAC8000 user manual

Porter-Cable

Porter-Cable C2150 instruction manual

Sealey

Sealey AD1 instructions

Sullair

Sullair LS16T Operators manual and parts lists

Villager

Villager VAT VE 100 Original instruction manual

GEA

GEA HGX6 R134a series Assembly instruction

RIDGID

RIDGID OL40135SS Operator's manual

Sullivan-Palatek

Sullivan-Palatek UD Series user manual

Outbac OTB300 User manual

Popular Air Compressor manuals by other brands