Outback Excel 100 User manual

Excel 100 Excel 300Excel 200
0694BR0014
Assembly and Operating Instructions for
Excel 100, Excel 200, and Excel 300 Gas Barbecues
Gas Barbecues
Photographs are not to scale.
Specifications subject to change
without prior notice.
WARNING
• For outdoor use only. Not for commercial use.
• Read instructions before using the appliance. Failure to follow instructions could
result in death, serious bodily injury, and/or property loss.
• Warning: accessible parts maybe very hot. Keep young children away.
• Do not move the appliance during use.
• Turn off the gas supply at the gas bottle after use.
• Any modification of the appliance, misuse, or failure to follow the instructions may
be dangerous and will invalidate your warranty. This does not affect your statutory
rights.
• Retain these instructions for future reference.
• Leak test your barbecue annually. Check the hose connections are tight and leak
test them each time you reconnect the gas bottle.
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open barbecue lid or hood.
4. If odour continues, discontinue use and
contact your local dealer.
FOR YOUR SAFETY
1. Do not store or use petrol or other flammable
vapours or liquids in the vicinityof this or any
other appliance.
2. A gas bottle not connected for use shall not be
stored in the vicinity of this or any other
appliance.

2
A. Parts List
Quantities vary according to model purchased. Specifications subject to change without prior notice. For more
details on hardware, please see the corresponding Hardware Reference Diagram for your barbecue model.
OUTBACK® EXCEL RANGE
CODE PART QTY EXCEL 100 EXCEL 200 EXEL 300
Body
Assembly
A1 Lava Rock Rack 1 √√√
A2 Burner 1 √√√
A3 Hood Lower Handle 1 √√√
A4 Hood 1 √* √* √*
A5 Body 1 √* √* √*
A6 Grease Cup Holder 1 √√√
A7 Grease Cup 1 √√√
A8 Cooking Grill 1 √√√
A9 Lava Rock (Shrink Packed) 1 √* √* √*
A10 Hood Upper Handle 1 √* √* √*
A11 Hinge Bracket 2 √* √* √*
A12 Main Electrode & Gas Collector Box 1 √√√
A13 Heat Shield 1 √√√
A14 Warming Rack 1 √√√
Upper
Trolle y
B1 Contro l P ane l 1 √√√
B2 Igniter Butto n 1 √* √* √*
B3 Main Burner Knob 2 √* √* √*
B4 Trolle y Handle 1 √
B5 Main Burner Hose 1 √*√*√*
B6 Side Shelf ▲2 1
B7 Side Burner Knob 1 √
B8 Side Burner Rack 1 √
B9 Side Burner Shelf 1 √
B10 Side Burner 1 √
B11 Side Burner Electrode 1 √
B12 Side Burner Valve/Hose Assembly 1 √*
Lower
Trolle y
C1 Short Leg Front 1 √√√
C3 Gas Cylinder Holder 1 √√√
C4 Wheel 2 √√√
C5 Axle 1
√√√
C6 Leg End Loop 1 √√√
C7 Long Leg Front 1 √√√
C10 Gas Bottle Strap 1 √*√*√*
Hardware
D1 M6x15 Bolt ▲24 28 28
D2 M5x10 Bolt 4 √√√
D3 M4x10 Bolt 1 √
D4 ST4.0x10 Screw 2 √√√
D5 ST4.8x15 Screw 2 √√√
D6 M8 Locknut 2 √√√
D7 M5 Keps Nut 2 √√√
D8 Wheel Spacer 2 √√√
D9 Shelf Spacer ▲8 4
C2 Short Leg Rear 1 √√√
C8 Long Leg Rear 1 √√√
C9 Bottom S helf 1 √√√
A16 Body Support 2 √√√
A15 Sillcon Bumpers 2 √√√
 Pre-Assembled
 Quantity and specification varies according to model purchased.

3
B1. Parts Diagram: Excel 100
Quantities vary according to model purchased. Specifications subject to change without prior notice. For more
details on hardware, please see ‘Hardware Reference Diagram: Excel 100.’
A8
A1
A9
A2
A13
A6
A7
A12
A3
A14
B1
B2
B3
B4
B5
C1
C3
C4 C6
C7
C9
C5
C2
C8
C10
A4 A5 A10
A11 A15
Pre-assembled body unit
includes the following
individual parts:
A16

4
B2. Hardware Reference Diagram: Excel 100
Specifications subject to change without prior notice.
D1
D1 D4 D2
D5D6D7

5
C1. Parts Diagram: Excel 200
Quantities vary according to model purchased. Specifications subject to change without prior notice. For more
details on hardware, please see ‘Hardware Reference Diagram: Excel 200.’
A8
A1
A9
A6
A7
A3
A2
A13
A12
A14
B1
B2
B3
B5
B6
C1
C3
C4 C6
C7
C9
C5
C2
C8
C10
Pre-assembled body unit
includes the following
individual parts:
A4 A5 A10
A11 A15
A16

6
C2. Hardware Reference Diagram: Excel 200
Specifications subject to change without prior notice.
D1
D4
D2D5
D6 D9 D7
D1

7
D1. Parts Diagram: Excel 300
Quantities vary according to model purchased. Specifications subject to change without prior notice. For more
details on hardware, please see ‘Hardware Reference Diagram: Excel 300.’
A8
A1
A9
A2
A13
A6
A12
A3
A14
B1
B2
B3
B5
B8
B11
B10
B9
B7
B6
A7
C1
C3
C4 C6
C7
C9
C5
C2 C8
C10
Pre-assembled body unit
includes the following
individual parts:
A4 A5 A10
A11 A15
B12
A16

8
D2. Hardware Reference Diagram: Excel 300
Specifications subject to change without prior notice.
D1
D1 D5 D4 D3
D7 D9 D2 D6

9
E. Assembly
TOOLS NEEDED FOR ASSEMBLY:
Medium size flat blade or Philips/cross-point screwdriver, adjustable spanner or metric spanner set
This barbecue requires two people for assembly. Please remove all packaging materials from all
individual parts before assembling. Please lay out all nuts and bolts and check lengths before
assembling. Whilst every care is taken during the manufacture of this product, care must be taken
during the assembly in case sharp edges are present.
2  Excel 100  Excel 200  Excel 300
C6
C7
Attach the Long Leg
Front (C7) and Long
Leg Rear (C8) to the
Leg End Loop (C6).
The legs are a push fit
onto the Leg End Loop.
In case of difficulty, they
may need tapping with
a soft faced mallet.
Take care not to
damage the parts.
C1
C2
C3
Attach the Short Leg
Front (C1) and Short
Leg Rear (C2) to the
Gas Cylinder Holder
(C3). The legs are a
push fit onto the Gas
Cylinder Holder. In case
of difficulty; they may
need tapping with a soft
faced mallet. Take care
not to damage the
parts.
 Excel 100  Excel 200  Excel 300
1

10
Attach the Bottom Shelf (C9) to the Gas Bottle
Holder (C3) using the screws (D5). Taking care
not to over tighten.
C9
C3
D1
Attach the leg assembly to the
Bottom Shelf assembly using the
screws (D1).
4
3
 Excel 100  Excel 200  Excel 300
 Excel 100  Excel 200  Excel 300
D5