Outdoor Essentials Vertical Garden Planter User manual

VERTICAL GARDEN PLANTER ASSEMBLY INSTRUCTIONS
Tools Included
Assembly Instructions
A - (3) Shelf bottoms with grooves (1-1/4"x 6"x 34-1/2")
B - (3) Shelf backs (1-1/4"x 6"x 34-1/2")
C - (3) Moulded shelf faces (5/8" x 5-3/8"x 34-1/2")
D - (1) Left side support (2"x 9-1/8"x 36")
E - (1) Right side support (2"x 9-1/8"x 36")
F - (2) Planter feet (1-3/8"x 3-3/8"x 15-3/4")
G - (8) Phillips-head screws
5/32"Allen wrench
Phillips-head bit
1. Place left side support (D) and right side support (E) on edge
with flat edge facing up, and routed sides facing inward. (Fig. 1)
2. Slide shelf bottoms (A) into routed slots in the side supports,
small groove toward front. (Fig. 2)
3. Slide the shelf backs (B) into the routed slots in the side
supports, perpendicular to the shelf bottoms. (Fig. 3)
a. Installation tip: Place the bottom of the shelf back in the
large groove in the shelf bottom, then press the rest of the
back into the opening to create a solid backing to the shelf.
The shelf backs are a snug fit and may require some force
to fit securely.
Fig. 1
Fig. 2
Fig. 3
Parts Included
D
E
E
D
A
B
A

UFP Granger, LLC • 50415 Herbert Street, Granger, IN 46530 • 574.277.7670 • OutdoorEssentialProducts.com
©2013 Universal Forest Products, Inc. All rights reserved. Outdoor Essentials is a registered trademark of Universal Consumer Products, Inc. 7397 07/13
This brochure is for illustration purposes only. Use of this product must be in accordance with all local zoning and/or building codes. Consumer assumes all risks and liability
associated with the use of this product. For details on safe handling and warranty information, go to UFPI.com/ptinfo.
Fig. 5
Fig. 4
Fig. 7
Fig. 6
C
G
G
G
G
G
G
G
G
F
F
4. Stand the assembly upright and slide the shelf faces (C) into
the slots at the front of the side supports. (Fig. 4)
5. Secure the assembly by driving the (6) provided screws (G)
through the side supports into the shelf bottoms. (Fig. 5)
6. Insert assembly into routed channels in the two planter feet (F).
(Fig. 6)
7. Secure the assembly to the planter feet by driving the (2) provided
screws through the feet into the side supports. (Fig. 7)
Note: Due to the weight of potting material, we recommend
that you place the elevated garden planter in its desired
location before filling it.
Project time: Approximately 30-60 minutes, depending on skill set
Finished dimensions: 36" H x 35" W x 15-3/4" D
Planting depth: 6"