Outdoor Revolution ORBK0064 User manual

www.outdoor-revolution.com
Outdoor Revolution
Unit 1 Brick Park, Breteld Court, Bretton Street Industrial Estate, Dewsbury, WF12 9BY
T: [phone]
ORBK0064
CAMPESE
INFLATABLE CAMPING FOOTREST
INSTRUCTIONS & PRODUCT CARE
IMPORTANT!
PLEASE READ THE FOLLOWING INSTRUCTIONS & WARNINGS
CAREFULLY BEFORE USING THIS PRODUCT
MADE IN CHINA FOR OUTDOOR REVOLUTION

www.outdoor-revolution.com
Should you have any concerns or issues regarding the
operation of this product, please contact:
Outdoor Revolution Customer Service helpline:
TEL [phone] or email: [email protected]
INSTRUCTIONS & PRODUCT CARE
PLEASE READ THE FOLLOWING INSTRUCTIONS
AND WARNINGS BEFORE USE
HOW TO INFLATE
HOW TO DEFLATE
WARNINGS & PRODUCT ADVICE
A LWAYS USE THIS PRODUCT IN A RESPONSIBLE WAY
TO AVOID THE RISK OF PUNCTURES OR INJURIES, A LWAY S ENSURE THE FURNITURE IS
PLACED ON LEVEL GROUND WITH NO SHARP OBJECTS SUCH AS STONES ETC
NEVER SIT ON THE INFLATABLE SOFA WITH SHARP OBJECTS IN YOUR POCKETS
NEVER PLACE ON OBJECTS OR AGAINST OBJECTS THAT MIGHT PUNCTURE OR CAUSE DAMAGE
NEVER PLACE YOUNG INFANTS ON INFLATABLE FURNITURE
DO NOT USE IN WATER AS A FLOATATION DEVICE
DO NOT ALLOW CHILDREN TO JUMP ON THE INFLATABLE FURNITURE
DO NOT OVER INFLATE. INFLATE WITH A LOW PRESSURE AIR PUMP / INFLATER
TO CLEAN ONLY USE MILD SOAPY WATER AND WIPE DRY WITH A TOWEL
DO NOT USE BLEACH OR ANY OTHER CHEMICAL FOR CLEANING
NEVER PUT IN THE WASHING MACHINE
A LWAYS FOLLOW THE MAXIMUM WEIGHT LOADING ADVICE
A LWAYS KEEP AWAY FROM FIRE OR OTHER SOURCES OF HEAT
DO NOT SMOKE NEAR OR WHILST USING THIS PRODUCT
A LWAYS STORE THE INFLATABLE FURNITURE IN A BOX TO AVOID PUNCTURES OR DAMAGE
FOR INFLATION WE RECOMMEND THE OUTDOOR REVOLUTION
DC 12V ELECTRIC AIR PUMP - ORBK0066
(NOT INCLUDED IN THIS PURCHASE)
AVAILABLE FROM ALL GOOD OUTDOOR REVOLUTION RETAILERS
WE RECOMMEND
IMPORTANT! - This product consists of 1 internal air chamber.
Locate the air valve, ensuring the end cap is open (leaving the black non air return valve
inserted) and connect to your ination device with a compatible size air connector nozzle.
Inate using either a manual air pump or a low pressure electric air bed air pump.
Inate the chamber to your desired rmness.
WARNING! - DO NOT OVER INFLATE
Once inated to your desired rmness, detach the connector nozzle from the non return
valve on the inatable sofa and insert the end cap to close. The whole valve can then be fully
pushed into the product so that it lays at on the surface without protruding.
To deate, simply pull out the black non air return valve from the valve housing on both air
chambers. With gentle pressure, push down the air chamber to expel the air.
To fully expel all the air, enabling the product to be folded down as small and compact as possible
for storage, we recommend that you use an air pump (either manual or electric low pressure air
bed air pump) set in reverse to fully deate all the air from the product.
WARNING!
NEVER USE AN ELECTRIC HIGH PRESSURE AIR PUMP FOR INFLATION AS THIS IS LIKELY TO
QUICKLY OVER INFLATE THE PRODUCT WITH A HIGH RISK OF RUPTURING THE AIR CHAMBER