Outdoor Tech BUCKSHOT PRO User manual

BUCKSHOT PRO
BLUETOOTH
SPEAKER
ALL-IN-ONE

Good call on picking up the Outdoor Tech®
BUCKSHOT PRO all-in-one speaker,
world will be fully covered by this little dude.
This manual exists to help make sure you
can use ‘em to the fullest potential. So sit
to get to know your BUCKSHOT PRO.
Kisses,
Hi.

CONTENTS
What’s Inside?
Anatomy
Power Up
Powerbank Functions
Pairing Mode
Music Functions
Phone Functions
Specs
Care & Maintenance
1
2
5
6
7
8
9
10
12

www.outdoortechnology.com

WHAT’S INSIDE
*Micro USB Cord and instructional manual
are also included in the packaging.
BUCKSHOT PRO
BIKE MOUNT

Multifunction button (MFB)
Blue and red LED light indicator
Volume down // Skip backward
Volume up // Skip forward
Microphone
Passive bass port
Micro USB port
USB output port
ANATOMY

POWER UP
TO CHARGE
1. Connect the included MIcro USB cord to a
power source and the charging port on the
BUCKSHOT PRO. When charging, the red LED
light will stay activated. ***Full charge time
is about 3 hours.
2. When the BUCKSHOT PRO is fully charged, the
RED light will turn off.
The displayed battery meter is supported for
Apple products.
*The BUCKSHOT PRO’s Bluetooth and music
functions can still operate while charging.

POWERBANK FEATURES
Charging your devices:
1. Connect the USB Port cable to the BUCKSHOT PRO’s
output port.
2. Connect the other port to your device.
3. Your device should automatically start charging.
4. When the your device is fully charged, disconnect
the BUCKSHOT PRO.

PAIRING MODE
Enter Pairing Mode
When powered on, it will enter into pairing mode
automatically. Hold the MFB for 2-3 seconds or
until you see the LED light flash blue and the voice
prompts states “Power on, Pairing.” The LED lights
will then flash red and blue alternately.
Pairing BUCKSHOT PRO to Device
Open the Bluetooth settings on your device. If
you have put your BUCKSHOT PRO into pairing
mode, it should be listed as “ODT BUCKSHOT
PRO” as an available device to pair. Connect
with the BUCKSHOT PRO. The voice prompt will
state “Successful” if the BUCKSHOT PRO and your
device connected. The blue LED light will flash
for as long as the device is connected and on.
Power On / Off
ON: Hold the MFB for 2-3
seconds or until the LED
light flashes blue and
the voice prompt states
“Power on”
OFF: Hold the MFB for
3-4 seconds or until the
LED light flashes red and
the voice prompt states
“Power off”
*The BUCKSHOT PRO will automatically repair to a previously
paired device.

MUSIC FUNCTIONS
Music/Device Controls
Skip backward
Volume down
MFB
Skip forward
Volume up
FUNCTION BUTTON ACTION
Power on Press 3 sec
Power off Press 2 sec
Pairing mode Hold 3 sec
Manual pairing
mode
Hold for 3 sec
Play / Pause Short press once
Volume up Short press once
Volume down Short press once
Skip forward Press & hold for
1 sec
Skip backward Press & hold for
1 sec
*The Volume up button is closest to the
speaker end of the BUCKSHOT PRO.
FUNCTION BUTTON ACTION
Power on Press 3 sec
Power off Press 2 sec
Pairing mode Hold 3 sec
Manual pairing
mode
Hold for 3 sec
Play / Pause Short press once
Volume up Short press once
Volume down Short press once
Skip forward Press & hold for
1 sec
Skip backward Press & hold for
1 sec

w
PHONE FUNCTIONS
Device Controls
Skip backward
Volume down
MFB
Skip forward
Volume up
FUNCTION BUTTON ACTION
Answer an
incoming call
Short press once
Reject an
incoming call
Press & hold for
2 sec
End call Short press once
Siri/Voice
activation
Short press
Last number
redial
Short press
Remove
previously
paired devices
Press & hold for 5
sec simultaneously
DFU Press & hold for
6 sec

SPECS
Rating: IPX5
Bluetooth v 4.0
Bluetooth Profiles: HFP. A2DP, AVRCP
Capatability: Bluetooth v 1.1 and above
Operating range: 32 ft
Device name: ODT Buckshot Pro
Pairing code: 0000 (if needed)
Power source: Lithium ion rechargeable bat -
tery cell
Battery capacity: 2600 mAh
Charging in: micro-USB 5V 1A
Charging out: 5V / 500 mA (max 700 mA)
Playing Time: Up to 20 hrs
Standby Time: +500 hrs
Operating Temperature: 0~45° C
Storage Temperature: -20~60° C
RoHS: Fully RoHS compliant

CARE & MAINTENANCE
- Do not access the input/output simultaneously.
It may affect the product’s performance and not
charge properly.
- Use a soft, dry cloth to wipe the surface.
Do not use intensive chemical products or detergent
to clean the product.
- Charge the product at least once every three months,
to prevent the batteries from drying out.
- It is normal for the battery to heat up during its
charge. The temperature should be below 45° & does
not affect the BUCKSHOT PRO’s performance.
- For best performance, fully charge the BUCKSHOT PRO
before charging other devices.
- All products have passed the strict quality
inspection, Do not use the battery/device if it gives
off an odor, generates heat, becomes deformed,
abrasion, damaged or appears abnormal in any way

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH
MODIFICATIONS OR CHANGE COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
Hereby, Joyatech, declares that this BUCKSHOT PRO is
In compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.

K, Later gator.

outdoortech.com
DON’T BE SO ANTISOCIAL
Facebook.com/outdoortech
Twitter & Instagram: @outdoortech
Questions, comments, complaints, secret desires,
or just to say what’s up: email [email protected]
K bye.