OVE PARK 1219262 User manual

PAGE 1
Questions, problems, need help?
Call our customer service department at
1-866-839-2888, 9 a.m. - 5 p.m., EST, Monday - Friday
English and French speaking representatives available
PARK
ITM. / ART. 1219262
INSTALLATION MANUAL - TUB DOOR
OVE 2020-02-11
An installation video guide can be found on our Youtube channel:

PAGE 2
TABLE OF CONTENT
TABLE OF CONTENTS.........................................................................2
SAFETY INFORMATION .............................................................................3
SAFETY NOTICE .........................................................................................4
PREPARATION ............................................................................................4
PACKAGE CONTENT ..................................................................................5
PART LIST ...................................................................................................7
SUPPLIED HARDWARE LIST .....................................................................8
TOOLS REQUIRED (not supplied) ............................................................8
REVERSIBILITY ..........................................................................................9
SHOWER DIMENSIONS ............................................................................10
WALL-TO-WALL DIMENSIONS .................................................................11
WALL TRACK INSTALLATION .................................................................12
FIXED PANEL AND SUPPORT BAR INSTALLATION ..............................13
SHOWER DOOR INSTALLATION .............................................................18
LEVELING THE GLASS PANEL ...............................................................20
SEAL STRIPS INSTALLATION .................................................................21
HANDLE INSTALLATION ..........................................................................22
SEALING ....................................................................................................23
CARE AND MAINTENANCE .....................................................................24
LIMITED Product Warranty ......................................................................25

PAGE 3
SAFETY INFORMATION
CAUTION
Please carefully read the following important safety information before handling or installing this shower. There is a risk of serious injury while
handling this product. To minimize these risks, please note:
• Always wear safety glasses and gloves while handling.
• Always read and follow all the steps in the installation instructions.
• Inspect all contents and glass for damage before installation.
• Extreme caution should be taken while handling the glass during installation as the tempered glass may shatter if in contact with a hard
surface.
• Handle the tempered glass with caution! Improperly handling the glass can cause it to break suddenly in small pieces (never in pointed
fragments).
• Always take all precautions not to touch the tempered glass with any tools during the installation, or after installed.
• Do not cut or modify the tempered glass as it will shatter if cut.
• Carefully remove product from packaging and keep packaging until installation is complete.
• Inspect all parts for damage; if there is damage to the unit prior to installation, please contact customer service at the number provided
in this guide.
• Install the shower on a oor that is level and able to accommodate the weight of the unit and an occupant.
• Consult local building codes and compliance standards prior to installation and ensure conformity.
• After installation, and from time to time, check the glass for t and nish to ensure that nothing has come loose since installation.
• Keep this installation manual for future reference.

PAGE 4
SAFETY NOTICE
PREPARATION
NOTICE
• Any modication or alteration from what is specied in this instruction manual will void any and all warranty on this product.
• The distributor is not responsible for any damage to the unit or personal property caused by improper installation. If you disregard
instructional warnings, you will void your warranty and possibly deal with water damage.
• Consult the distributor’s website for any additional information or question on this product’s installation.
You will need at least two people to install this unit properly.
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: Shower (2 h)

PAGE 5
PACKAGE CONTENT
B
C
P
Q
S
T
D
HK
J
E
R
I
O
N
F
L
M
G
A

PAGE 6
PACKAGE CONTENT
B
x1
C
x1
D
1x
E
1x
F
2x
G
2x
H
1x
I
2x
J
1x
K
1x
L
2x
M
2x
N
2x
P
1x
O
1x
Q
1x
R
1x
S
1x
T
2x
A
x2

PAGE 7
PART LIST
PART # DESCRIPTION QUANTITY CODE
A Fixed panel bracket 2 99SGC1024-WM
B Wall track 1 99STR0023-WM
C Fixed panel 1 99SG20101-WM
D Door panel 1 99SGD0101-WM
E Support bar 1 99SGS1009-WM
F Shower door stopper 2 99SDS0000-WM
G Support bar anchor 2 99SGC1025-WM
H Door handle 1 99SHA1013-WM
I Glass panel vertical seal strip 2 99SRU0046
J Door bottom seal strip 1 99SRU0028
K Door panel vertical seal strip 1 99SRU0091
L Door roller 2 99SWE0004-WM
M Door anti-jump peg 2 99SWE0006-WM
N Short seal strip 2 99SRU0063
O Decorative cap 1 99SHW0018-WM
P Fixed panel bottom seal strip 1 99SRU0039
QSliding door guide (with its rubber tting) 199SGC1026-WM
RAluminum prole 199SGC2038-WM
S Decorative track 1 99STR2021-WM
T Decorative cap 2 99SHW0101-WM
*** Complete hardware kit 1 99SHW0134-WM

PAGE 8
SUPPLIED HARDWARE LIST
TOOLS REQUIRED (Not included)
Wall Anchor
ø8x30mm
7+2
Cap
3x
Fitting
3x
Screw
ST5x30mm
3+1
Pencil Screwdriver Drill and drill bits
ø3 mm (1/8 in) & ø8 mm (5/16 in)
LevelMeasuring Tape Silicone Rubber mallet
Cutter
Safety glasses Ratchet
5 mm Bit socket
Screw
ST4x12mm
3+1
Screw
ST5x35mm
4+1
Screw
ST4x20mm
1+1
CC
I I
BB
AA DD EE
GG
FF
Cap
1x
HH
Allen key
2mm & 2.5mm & 5mm

PAGE 9
REVERSIBILITY
This instruction is drawn up for a door opening from right to left (see illustration A).
For an installation for a door opening from left to right (see illustration B), use the same instructions, but switch
around the panels: mirror e󰀨ect.
Install the shower head on the door’s side as shown in the illustration! This will reduce the risk of leaking.
FAQ
Q: If the shower head is installed on the
other wall, will it leak?
A: It is possible to install your shower
head on the other side, but we strongly
recommend to install it as illustrated.
A B

PAGE 10
SHOWER DIMENSIONS
A
150.4 cm [59 3/16 in]
B
150 cm [59 1/16 in]
C
74 cm [29 1/8 in]
E
63.5 cm [25 in]
F
18 cm [7 1/16 in]
B
150 cm [59 1/16 in]
Measurements
AShower width
BTub door height
CFixed panel width
DDoor panel width
EDoor opening
FDistance between handle holes
Measures: centimeter [inch]
D
80.5 cm [31 11/16 in]

PAGE 11
WALL-TO-WALL DIMENSIONS
• Measure the thickness of your tiles on either side before installing the metal tracks. A thicker tile will limit your
space to install the shower panels.
• Make sure to have a distance tile to tile (D) between 150.4 cm (59 3/16 in) min. and 152 cm (59 13/16 in) max.
(see image).
WARNING!
Make sure to have a distance (D) from the left side
tile to the right side tile:
D Min: 150.4 cm (59 3/16 in)
D Max: 152 cm (59 13/16 in)
If distance is smaller than 150.4 cm (59 3/16 in) you
can cut the support bar to adequate size.
IMPORTANT: Only cut the side with no holes!
D

PAGE 12
#1
A-B. Position the wall track (B) as illustrated. Level the track (B) and mark the track holes positions.
C. Remove the track and drill pilot holes in the marked locations with a ø8 mm (5/16 in) drill bit.
D. If there are no studs located behind the wall track (B), then insert the wall anchors (AA) using a rubber mallet until the wall anchors are ush with the wall.
E. Replace and secure the track (B) with screws (EE). Do not overtighten.
WALL TRACK INSTALLATION
B
ø8 mm
5/16 in
B
C
DE
30 mm[1 1/4 in]
A
EE
AA
WARNING!
If there are no studs aligned to the wall track behind the
drywall, use the wall anchors to ensure the screws won’t
become loose.

PAGE 13
#2 FIXED PANEL AND SUPPORT BAR INSTALLATION
C
B
C
P
C
CQ
B
A
A. Insert the xed panel bottom seal strip (P) on the base of the xed panel (C). Cut the surplus part with a cutter, about 24 mm (15/16 in) from the panel’s
edge.
B. Insert the xed panel (C) into the wall track (B). Do not fully tighten it as further adjustments may be required.
Note: The wall track (B) allows you to adjust the position of the xed panel (C). Adjusting the depth and/or giving the glass panel a slight angle allows
for precise alignment with the door.
C. Smoothly slide the sliding door guide (Q) at the bottom of the xed panel (C), but without securing it.
24 mm [15/16 in]

PAGE 14
#3
A. Slide the 2 stoppers (F) and the support bar anchor (G) onto the support bar (E).
B. Loosely mount the support bar (E) onto xed panel (C) using the brackets (A) and level it.
C-D. Mark the outline of the support bar’s anchor (G) on the wall.
E. Mark the position of the guide (Q).
FIXED PANEL AND SUPPORT BAR INSTALLATION
A B
FG
G
C
E
C
Q
G
C
E
D
F
EA

PAGE 15
C
E
A
#4
A-D. Completely remove the support bar (E), the guide (Q) and the xed panel (C).
FIXED PANEL AND SUPPORT BAR INSTALLATION
A
C
B
D
C
C
Q
B
FG
GF
E

PAGE 16
ø 8mm
5/16 in
DD
Q
ø3 mm
1/8 in
#5
A-B. Mark the position of hole of the sliding door guide (Q). Drill a pilot hole for the sliding door guide (Q) using a ø3 mm (1/8 in) drill bit.
C. Install the sliding door guide (Q) with the screw (DD) and the cap (II).
D. Place the support bar anchor (G) back on its wall mark, then mark its center on the wall.
E-F. Drill a hole on the center marks with a ø8 mm (5/16 in) drill bit . If there are no studs located behind the support bar anchor (G), then insert the wall anchors
(AA) using a rubber mallet until the wall anchors are ush with the wall. Fix the center tting on the support bar anchor (G) using the screws (CC).
FIXED PANEL AND SUPPORT BAR INSTALLATION
HELPFUL HINT!
Add a drop of silicone in the holes
before inserting the screws.
WARNING!
If there are no studs aligned to the wall track behind the
drywall, use the wall anchors to ensure the screws won’t
become loose.
C
B
E
AA
CC
G
G
Q
A
D
F
II

PAGE 17
C
E
A
#6
A-B. Insert the door bottom seal strip (J) onto the door panel (D).
C-D. Place the xed panel (C) into the wall track (B) and put back the sliding door guide (Q).
E. Slide again the roller stoppers (F) and the support bar anchor (G) onto the support bar (E).
F. Fix the support bar (E) onto the xed panel (C) using the brackets (A).
FIXED PANEL AND SUPPORT BAR INSTALLATION
WARNING!
Before continuing, place the door panel
(D) inside the shower enclosure to
facilitate future steps!
B
C
C
G
FG
F
E
D
C
Q
B
J
J
D
D
F
E
A

PAGE 18
#7 SHOWER DOOR INSTALLATION
A
D
B
C
G
G
G
F
E
E
E
E
R
F
F
C
A-C. Secure the support bar (E) on its anchors using the provided hex screws.
D. Install the aluminum prole (R) onto the support bar (E) right behind the stopper (F) on the xed panel side (C).

PAGE 19
#8 SHOWER DOOR INSTALLATION
L
D
ED
M
D
C
A B
A. Install the 2 door rollers (L) on the door panel (D). Use a ratchet to strongly tighten the bolts.
B. Gently hang the door panel by its 2 top rollers on the support bar (E) and make sure to place the bottom of the door inside the guide (Q).
C. Install the 2 anti-jump pegs (M) on the door panel (D). Use a ratchet to strongly tighten the bolts.
C

PAGE 20
#9
After the wheels have been installed, adjust the level of the glass panel using the eccentric mechanism of the rollers. Fit the bigger Allen key in the center
of the inner roller, hold it in place, do not turn it, as it will loosen the wheel. Fit the smaller Allen key in the small hole located on the rim of the inner roller. While
holding the bigger Allen key in place turn the smaller Allen key around to move the glass panel up or down.
LEVELING THE GLASS PANEL
HELPFUL HINT!
When the eccentric backside of the wheel is in this
position, it has reached the “highest” glass position.
HELPFUL HINT!
When the eccentric backside of the wheel is in this
position, it has reached the “lowest” glass position.
A B
A B