Overland Storage SnapScale Service manual

Overland
Storage
SnapScale®
Administrator’s Guide
For Appliances Running
RAINcloudOS®Version 4.1
October 2014
10400455-002

Overland Storage, Inc.
9112 Spectrum Center Blvd.
San Diego, CA 92123
U.S.A.
Tel: [phone] (toll-free U.S.)
Tel: [phone], Option 5 (International)
Fax: [phone] (general)
Fax: [phone] (sales)
www.overlandstorage.com
SnapScale/RAINcloudOS 4.1 Administrator’s Guide
10400455-002 ©2008-14 Overland Storage, Inc. 2
©2008-14 Overland Storage, Inc. All rights reserved.
Overland®, Overland Storage®, ARCvault®, DynamicRAID®, GuardianOS®, NEO®, NEO Series®, PowerLoader®, Protection OS®, RAINcloud®, REO®, REO
4000®, REO Series®, Snap Appliance®, Snap Care® (EU only), SnapSAN®, SnapScale®, SnapScale X2®, SnapServer®, StorAssure®, Ultamus®, VR2®, and
XchangeNOW®are registered trademarks of Overland Storage, Inc.
Tandberg Data®, AccuGuard®, AccuVault®, DPS1000 Series®, DPS1100®, DPS1200®, DPS2000®, Magnum®, QuikStation®, QuikStor®, RDX®, RDXPRO®,
StorageLibrary®, StorageLoader®, Tandberg SecureService®, Tandberg StorageLibrary®, and VXA®are registered trademarks of Tandberg Data, Inc.
RapidRebuild™, SnapExpansion XSR™, SnapScale X4™, SnapServer DX Series™, SnapServer XSD Series™, SnapServer XSD 40™, SnapServer XSR
Series™, SnapServer XSR 40™, SnapServer XSR 120™, and SnapServer Manager™ are trademarks of Overland Storage, Inc.
BizNAS™ and QuadPak™ are trademarks of Tandberg Data, Inc.
All other brand names or trademarks are the property of their respective owners.
The names of companies and individuals used in examples are fictitious and intended to illustrate the use of the software. Any resemblance to actual
companies or individuals, whether past or present, is coincidental.
PROPRIETARY NOTICE
All information contained in or disclosed by this document is considered proprietary by Overland Storage. By accepting this material the recipient agrees that
this material and the information contained therein are held in confidence and in trust and will not be used, reproduced in whole or in part, nor its contents
revealed to others, except to meet the purpose for which it was delivered. It is understood that no right is conveyed to reproduce or have reproduced any item
herein disclosed without express permission from Overland Storage.
Overland Storage provides this manual as is, without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties
of merchantability and fitness for a particular purpose. Overland Storage may make improvements or changes in the product(s) or programs described in this
manual at any time. These changes will be incorporated in new editions of this publication.
Overland Storage assumes no responsibility for the accuracy, completeness, sufficiency, or usefulness of this manual, nor for any problem that might arise
from the use of the information in this manual.
FW 4.1.098

10400455-002 ©2008-14 Overland Storage, Inc. 3
Preface
Audience and Purpose
This guide is intended for system and network administrators charged with installing and
maintaining a SnapScale cluster running RAINcloudOS version 4.1 on their network. It
provides information on the installation, configuration, security, and maintenance of the
SnapScale cluster and nodes. It is assumed that the administrator is familiar with the basic
concepts and tasks of multi-platform network administration.
This guide also provides information on the following utilities and software components:
•The RAINcloudOS 4.1 Web Management Interface
•SnapServer Manager (SSM)
•CA Antivirus software
RAINcloudOS version 4.1 comes preinstalled on all new SnapScale X-Series nodes. It can also
be upgraded from a previously installed version of RAINcloudOS version 3.0 or later.
Product Documentation & Software Updates
SnapScale product documentation and additional literature are available online, along with
the latest release of the RAINcloudOS version 4.1.
Point your browser to:
http://docs.overlandstorage.com/snapscale
Follow the appropriate link on that page to download the latest software file or document. For
additional assistance, search at http://support.overlandstorage.com.
Overland Technical Support
For help configuring and using your SnapScale cluster, email our technical support staff at:
[email protected].
You can get additional technical support information on the Contact Support web page at:
http://docs.overlandstorage.com/support
For a complete list of support times based on your type of coverage, visit our website at:
http://docs.overlandstorage.com/care

10400455-002 ©2008-14 Overland Storage, Inc. 4
SnapScale/RAINcloudOS 4.1 Administrator’s Guide Preface
Japanese Voluntary Control Council for Interference (VCCI)
Conventions
This document exercises several alerts and typographical conventions.
Information contained in this guide has been reviewed for accuracy, but not for product
warranty because of the various environments, operating systems, or settings involved.
Information and specifications may change without notice.
Convention Description & Usage
WARNING
WARNUNG
ADVERTISSEMENT
A Warning contains information concerning personal safety. Failure to follow
directions in the Warning could result in bodily harm or death.
Eine Warnung enthält Informationen zur persönlichen Sicherheit. Das
Nichtbeachten der Anweisungen in der Warnung
kann zu Verletzungen oder zum Tod führen.
Un avertissement contient des informations relatives à la sécurité
personnelle. Ignorer les instructions dans
l'avertissement peut entraîner des lésions corporelles ou la mort.
CAUTION A Caution contains information that the user needs to know to avoid
damaging or permanently deleting data or causing physical damage to
the hardware or system.
IMPORTANT An Important note is a type of note that provides information essential to
the completion of a task or that can impact the product and its function.
Item_name Words in this special boldface font indicate the names of buttons or page
names found in the Web Management Interface.
Ctrl-Alt-r This type of format details the keys you press simultaneously. In this
example, hold down the Ctrl and Alt keys and press the rkey.
NOTE A Note indicates neutral or positive information that emphasizes or
supplements important points of the main text. A note supplies
information that may apply only in special cases, for example, memory
limitations or details that apply to specific program versions.
Menu Flow
Indicator (>)
Words with a greater than sign between them indicate the flow of actions
to accomplish a task.
For example, Setup > User > Password indicates that you should click the
Setup tab, then the User secondary tab, and finally the Password button
to accomplish a task.
Courier Italic A variable for which you must substitute a value.
Courier Bold Commands you enter in a command-line interface (CLI).

10400455-002 ©2008-14 Overland Storage, Inc. 5
Contents
Preface
Conventions ..................................................................................................................................................................4
Chapter 1: Overview
SnapScale Conventions .............................................................................................................................................11
SnapScale Node Requirements ................................................................................................................................12
RAINcloudOS Specifications ......................................................................................................................................13
What’s New in RAINcloudOS 4.1 ...............................................................................................................................14
RAINcloudOS 4.0 Features .........................................................................................................................................15
Using SnapServer Manager with SnapScale ............................................................................................................16
SnapServer Manager Installation ........................................................................................................................16
Client and Storage Networks ....................................................................................................................................16
Node/Switch Cabling Example ...........................................................................................................................17
Node Port Configurations ..........................................................................................................................................17
X2 Node Configurations .......................................................................................................................................17
X4 Node Configurations .......................................................................................................................................19
Chapter 2: Initial Setup and Configuration
Connecting for the First Time .....................................................................................................................................21
Connect Using the Node Name .........................................................................................................................21
Connect Using SSM ...............................................................................................................................................22
Setup a New SnapScale Cluster (via Wizard) ..........................................................................................................23
Step 1 – Select SnapScale Nodes .......................................................................................................................24
Step 2 – Client Network Configuration Overview ..............................................................................................25
Step 3 – Choose Client Network Static TCP/IP Settings ....................................................................................26
Step 4 – Configure Node Static IP Addresses ....................................................................................................27
Step 5 – Basic SnapScale Properties ...................................................................................................................29
Step 6 – Set Date and Time ..................................................................................................................................30
Step 7 – Summary Verification & Cluster Creation ............................................................................................31
Join an Existing SnapScale Cluster (via Wizard) ......................................................................................................36
Web Management Interface ....................................................................................................................................37
Alert Messages ......................................................................................................................................................40
Site Map .................................................................................................................................................................41
Contact, Hardware & Software Information .....................................................................................................41
Chapter 3: SnapScale Settings
SnapScale Properties ..................................................................................................................................................43
Date/Time ....................................................................................................................................................................44
Secure Shell .................................................................................................................................................................45
Disable SSH .............................................................................................................................................................45

10400455-002 ©2008-14 Overland Storage, Inc. 6
SnapScale/RAINcloudOS 4.1 Administrator’s Guide Contents
Connect to the CLI using SSH ..............................................................................................................................46
UPS Protection .............................................................................................................................................................46
Edit UPS Properties .................................................................................................................................................47
Configure UPS Protection .....................................................................................................................................48
Add Network UPS Device .....................................................................................................................................48
Change Network UPS Device ..............................................................................................................................49
Delete Network UPS Device .................................................................................................................................49
Chapter 4: Network Settings
Network Information ...................................................................................................................................................51
Client Network Information ..................................................................................................................................51
Storage Network Information ..............................................................................................................................53
TCP/IP Networking ......................................................................................................................................................54
Bonding Options ....................................................................................................................................................56
Guidelines in TCP/IP Configuration .....................................................................................................................56
Edit Storage Network Properties ..........................................................................................................................57
Utility IP Address .....................................................................................................................................................59
Windows/SMB Networking .........................................................................................................................................61
Support for Windows/SMB Networking ...............................................................................................................62
Support for Windows Network Authentication ..................................................................................................62
Connect from a Windows Client ........................................................................................................................63
Connect a Mac OS X Client Using SMB ..............................................................................................................64
Configure Windows/SMB Networking .................................................................................................................64
NFS Access ...................................................................................................................................................................67
Assigning Share Access to NFS Users ...................................................................................................................68
Enable NFS Access to the Cluster .......................................................................................................................68
Configure NFSv4 Access ......................................................................................................................................69
LDAP/NIS Domains ......................................................................................................................................................71
LDAP vs. NIS Overview ..........................................................................................................................................71
Configuring LDAP ..................................................................................................................................................71
Configuring NIS ......................................................................................................................................................73
FTP/FTPS Access ...........................................................................................................................................................74
Supported FTP Clients ...........................................................................................................................................74
Configure FTP/FTPS Access ..................................................................................................................................74
Connect via FTP/FTPS ...........................................................................................................................................75
SNMP Configuration ...................................................................................................................................................75
Default Traps ..........................................................................................................................................................76
Supported Network Manager Applications and MIBs ......................................................................................76
Configure SNMP ....................................................................................................................................................77
Web Access .................................................................................................................................................................78
Configuring HTTP/HTTPS ........................................................................................................................................78
Configure the SnapScale Cluster as a Simple Web Server Using Web Root ..................................................79
iSNS Configuration ......................................................................................................................................................82
Configure the iSNS Settings ..................................................................................................................................82
Update iSNS Registration ......................................................................................................................................83
Chapter 5: Storage Options
Peer Sets .......................................................................................................................................................................85
Peer Sets and Recovery .......................................................................................................................................86
Peer Set Utilization .................................................................................................................................................87
Peer Set Basics .......................................................................................................................................................87

10400455-002 ©2008-14 Overland Storage, Inc. 7
SnapScale/RAINcloudOS 4.1 Administrator’s Guide Contents
Peer Sets Page ......................................................................................................................................................88
Spare Disks Page ...................................................................................................................................................90
Spare Distributor ....................................................................................................................................................91
Data Balancer .......................................................................................................................................................93
Volumes .......................................................................................................................................................................96
Volume Overview .................................................................................................................................................96
Creating Volumes .................................................................................................................................................96
Edit Volume Properties .........................................................................................................................................99
Deleting Volumes ................................................................................................................................................100
Quotas ........................................................................................................................................................................101
Default Quotas ....................................................................................................................................................101
Quotas for Volume Page ...................................................................................................................................103
Add Quota Wizard ..............................................................................................................................................105
Editing or Removing Quotas ..............................................................................................................................108
Snapshots ...................................................................................................................................................................109
Snapshots Overview ...........................................................................................................................................110
Creating Snapshots .............................................................................................................................................111
Adjusting Snapshot Space .................................................................................................................................113
Accessing Snapshots ..........................................................................................................................................114
Scheduling Snapshots .........................................................................................................................................114
Edit Snapshot Properties .....................................................................................................................................115
iSCSI Disks ...................................................................................................................................................................115
Configuring iSCSI Initiators ..................................................................................................................................115
iSCSI Configuration on the SnapScale .............................................................................................................116
Create iSCSI Disks ................................................................................................................................................119
Edit iSCSI Disk Properties .....................................................................................................................................121
Delete an iSCSI Disk ............................................................................................................................................121
Configuring VSS/VDS for iSCSI Disks ...................................................................................................................122
Nodes .........................................................................................................................................................................125
Nodes Overview ..................................................................................................................................................125
Edit Node Properties ...........................................................................................................................................126
Node Drives .........................................................................................................................................................127
Adding Nodes .....................................................................................................................................................127
Removing Nodes .................................................................................................................................................133
Node Identification .............................................................................................................................................134
Disks ............................................................................................................................................................................135
Replacing Drives .................................................................................................................................................135
Adding Drives ......................................................................................................................................................136
Chapter 6: Security Options
Overview ....................................................................................................................................................................141
Guidelines for Local Authentication .................................................................................................................142
User and Group ID Assignments ........................................................................................................................143
Security Guides .........................................................................................................................................................143
Security Guide for Windows Active Directory ..................................................................................................144
Security Guide for Entire Volume Access .........................................................................................................145
Security Guide for Folder Access on Volume ..................................................................................................146
Shares .........................................................................................................................................................................147
Share Security Overview ....................................................................................................................................147
Create Shares ......................................................................................................................................................148
Edit Share Properties ...........................................................................................................................................150

10400455-002 ©2008-14 Overland Storage, Inc. 8
SnapScale/RAINcloudOS 4.1 Administrator’s Guide Contents
Delete Shares .......................................................................................................................................................152
Configuring Share Access ..................................................................................................................................153
Local Users .................................................................................................................................................................161
Create a User ......................................................................................................................................................162
Edit User Properties ..............................................................................................................................................163
Local User Password Policies ..............................................................................................................................165
Assign User to Group ...........................................................................................................................................166
Delete Local User ................................................................................................................................................167
Local Groups .............................................................................................................................................................168
Create New Group .............................................................................................................................................169
Edit Group Properties ..........................................................................................................................................170
Specify Users in Group ........................................................................................................................................171
Delete Group .......................................................................................................................................................172
Security Models .........................................................................................................................................................173
Managing Volume Security Models .................................................................................................................173
ID Mapping ................................................................................................................................................................175
Add Mapping ......................................................................................................................................................175
Change Mapping ...............................................................................................................................................178
Auto Mapping .....................................................................................................................................................181
Remove Mappings .............................................................................................................................................182
Remove Missing ID Mappings ............................................................................................................................185
Filesystem Updates ..............................................................................................................................................187
Home Directories ......................................................................................................................................................188
Configure Home Directories ..............................................................................................................................189
Chapter 7: System Monitoring
System Status .............................................................................................................................................................192
SnapScale Status .................................................................................................................................................192
Activity .......................................................................................................................................................................193
Active Users ..........................................................................................................................................................194
Open Files ............................................................................................................................................................195
Network Monitor ..................................................................................................................................................196
Event Log ...................................................................................................................................................................201
Filter the Log ........................................................................................................................................................201
Protocol Manager ....................................................................................................................................................202
SnapScale Settings ...................................................................................................................................................203
Tape ...........................................................................................................................................................................205
Chapter 8: Maintenance
Shutdown and Restart ..............................................................................................................................................207
Manually Powering SnapScale Nodes On and Off ........................................................................................207
Data Import ...............................................................................................................................................................208
Setting Up a Data Import Job ............................................................................................................................209
Stopping an Import Job .....................................................................................................................................211
Recreating an Import Job ..................................................................................................................................211
Preserving Permissions .........................................................................................................................................212
OS Update .................................................................................................................................................................213
Update the RAINcloudOS ..................................................................................................................................213
Online/Rolling Updates Notes ............................................................................................................................215
Update Notification Option ...............................................................................................................................217
Last OS Update ...................................................................................................................................................220

10400455-002 ©2008-14 Overland Storage, Inc. 9
SnapScale/RAINcloudOS 4.1 Administrator’s Guide Contents
Support .......................................................................................................................................................................220
Registering Your Cluster ......................................................................................................................................221
Maintenance Tools ...................................................................................................................................................224
Email Notification ................................................................................................................................................225
Host File Editor ......................................................................................................................................................227
Delete SnapScale Cluster ..................................................................................................................................228
Chapter 9: Misc. Options
Home Pages ..............................................................................................................................................................231
Home Page ..........................................................................................................................................................231
Administration Page ...........................................................................................................................................233
SnapExtensions ..........................................................................................................................................................235
BitTorrent Sync .....................................................................................................................................................235
Snap EDR ..............................................................................................................................................................238
Snap Finder ................................................................................................................................................................238
Edit Snap Finder Properties ................................................................................................................................240
Change Password ....................................................................................................................................................241
Changing Your Password ...................................................................................................................................241
Management Interface Settings .............................................................................................................................242
Appendix A: Backup Solutions
Backup and Replication Solutions ..........................................................................................................................244
Snap Enterprise Data Replicator .............................................................................................................................244
Snap EDR Usage ..................................................................................................................................................245
Configuring Snap EDR ........................................................................................................................................245
Scheduling Jobs in Snap EDR ............................................................................................................................246
Backup via SMB or NFS .............................................................................................................................................246
Off-the-Shelf Backup Solutions ................................................................................................................................246
Utility IP Address ...................................................................................................................................................246
Appendix B: Security and Access
Security Model Rules .................................................................................................................................................247
Security Model Management .................................................................................................................................248
Special Share Options ..............................................................................................................................................248
Hiding Shares .......................................................................................................................................................249
Share Level Permissions ......................................................................................................................................249
Where to Place Shares .......................................................................................................................................249
File and Share Access ..............................................................................................................................................249
NFS Share Access ................................................................................................................................................250
Snapshot Access .................................................................................................................................................250
Snapshot Shares and On Demand File Recovery ...........................................................................................250
Creating a Snapshot Share ................................................................................................................................250
File-level Security .......................................................................................................................................................251
Security Personalities and Security Models ......................................................................................................251
Windows ACLs .....................................................................................................................................................251
Appendix C: Troubleshooting
LED Indicators ............................................................................................................................................................253
SnapScale X2 Node LEDs ...................................................................................................................................253
X2 LED States ........................................................................................................................................................254

10400455-002 ©2008-14 Overland Storage, Inc. 10
SnapScale/RAINcloudOS 4.1 Administrator’s Guide Contents
SnapScale X4 Node LEDs ...................................................................................................................................255
Network Reset ...........................................................................................................................................................256
Performing System Resets Without Network Access .......................................................................................257
Networking Issues ......................................................................................................................................................257
Miscellaneous Issues .................................................................................................................................................259
Phone Home Support ...............................................................................................................................................260
Appendix D: RAINcloudOS Ports
Appendix E: Command Line Interface
SnapCLI Syntax ..........................................................................................................................................................266
SnapCLI Procedures ...........................................................................................................................................267
SnapCLI Commands ................................................................................................................................................268
Scripts in SnapCLI ......................................................................................................................................................272
Running a SnapCLI Script ...................................................................................................................................272
Sample Script .......................................................................................................................................................272
Master Glossary & Acronym List
Index

10400455-002 ©2008-14 Overland Storage, Inc. 11
Chapter 1
Overview
SnapScale is a flexible, scalable, low-maintenance network-attached storage cluster composed
of a redundant array of independent nodes running RAINcloudOS (ROS). This guide applies to
SnapScale nodes running RAINcloudOS version 4.1.
Offering user-selectable levels of data redundancy, SnapScale uses File-level Striping to write
data across multiple nodes and drives simultaneously for instant protection and high
availability. With a SnapScale cluster, volumes can be configured, created, provisioned, and
grown on demand. Special features such as Data Balancer redistributes files to optimize
performance and Spare Distributor evenly distributes spare drives across nodes. Files can be
accessed either through NFS or CIFS/SMB protocols. SnapScale Flexible Volumes
automatically adjust capacity so they only occupy as much space as their data requires.
Topics in Overview:
•SnapScale Conventions
•SnapScale Node Requirements
•RAINcloudOS Specifications
•What’s New in RAINcloudOS 4.1
•RAINcloudOS 4.0 Features
•Using SnapServer Manager with SnapScale
•Client and Storage Networks
•Node Port Configurations
SnapScale Conventions
The SnapScale cluster supports three or more nodes hosting redundant sets of data for data
protection. An Administrator can configure, add, or remove nodes on demand to change
storage requirements. The overall storage system is able to easily grow from three nodes to
meet your needs.

10400455-002 ©2008-14 Overland Storage, Inc. 12
SnapScale/RAINcloudOS 4.1 Administrator’s Guide 1 - Overview
Peer sets are created using two or three drives (based on redundancy choices) located on
different nodes. Each peer set member has the same data and metadata as its peers.
There are three different states for SnapScale nodes:
•Uninitialized node – an independent node that has not yet been joined to a SnapScale
cluster.
•SnapScale node – a healthy node that is a member of a fully-configured SnapScale
cluster. Both 2U nodes with up to 12 drives and 4U nodes with 36 drives are available.
•Management node – a SnapScale node with special duties involved in managing the
cluster. The Management node is selected automatically by the RAINcloudOS when the
cluster boots. Should that management node fail, another currently available node is
automatically chosen to become the new Management node. This Management node also
hosts peer sets with metadata and data just like all other SnapScale nodes.
Other key concepts include:
•Management IP – the IP address through which the administrator accesses the Web
Management Interface of the current Management node.
•Peer set – a set of two or three disks (each on a separate node) that have mirrored data
for redundancy.
•Cluster Name – the name visible to network clients and used to connect to the cluster
(similar to a server name), and resolvable to node IP addresses via round robin DNS.
•Cluster Management Name – the hostname resolvable to the Management IP for Web
Management Interface access or Snap EDR configuration.
•Data Replication Count – an administrator-specified, cluster-wide count of the
number of mirrored copies of data within the cluster. The Data Replication Count can be
either “2” or “3” and determines the number of drives in a peer set.
A SnapScale cluster consists of two separate networks:
•Client Network – used exclusively for client access. Clients can connect to any node to
access data anywhere on the cluster.
•Storage Network – an isolated network used exclusively by the cluster for inter-node
communications. This includes:
•Heartbeat (node health/presence) sensing.
•Synchronization of peer set members.
•Data transfer between nodes to facilitate clients reading from and writing to files.
SnapScale Node Requirements
The following table details the basic requirements for cluster nodes:
Requirement Detailed Description
Minimum number of nodes A SnapScale cluster must have a minimum of three (3) nodes to
operate normally.
No expansion units A SnapScale node cannot have any expansion units attached to it.
Minimum number of disks per
node
Each node must have a minimum of four disks. Additional disks can be
added as needed.

10400455-002 ©2008-14 Overland Storage, Inc. 13
SnapScale/RAINcloudOS 4.1 Administrator’s Guide 1 - Overview
RAINcloudOS Specifications
These specifications apply to SnapScale nodes running RAINcloudOS version 4.1:
Maximum size of file on cluster While the system reports total free space across the entire cluster, the
maximum file size at any given time is dictated by free space on the
least-utilized peer set. This is reported in the Web Management
Interface.
Common Storage network To form or join a SnapScale cluster, each Uninitialized node must be
connected to the same Storage network as the other nodes.
Storage network links To form or join a SnapScale cluster each Uninitialized node must have
connectivity (active link) on both Storage network ports.
Storage network usage Only a single cluster can use a given Storage network.
Client network separate from
Storage network
The Client and Storage networks must be on different (independent)
networks, and the Storage network must be isolated from all other
networks.
Nodes must be running same
RAINcloudOS version
To form a SnapScale cluster, all nodes must be running the same
version of RAINcloudOS.
To join an already configured SnapScale cluster, an Uninitialized node
must have the same version of RAINcloudOS as the other SnapScale
nodes:
• If the Uninitialized node has an older version of the RAINcloudOS,
the Uninitialized node must be upgraded to the later version.
• If the Uninitialized node has a newer version of the RAINcloudOS,
then all SnapScale nodes must be upgraded to the later version.
(The node can be reinstalled with a version matching the cluster if
the hardware supports it.)
Adding nodes When adding nodes to an existing cluster, the number of nodes added
at one time should be at least the same number as the Data
Replication Count. This ensures the new nodes and cluster are
efficiently utilizing increased storage space.
Disk requirements All disks in the cluster must be the same type of disk (such as SAS)
and same rotational speed.
Requirement Detailed Description
Feature Specification
Network Transport Protocols • TCP/IP (Transmission Control Protocol/Internet Protocol)
• UDP/IP (User Datagram Protocol/Internet Protocol)
Network File Protocols • Microsoft Networking (CIFS/SMB1/SMB2)
• Unix Network Filesystem (NFS) 2.0/3.0/4.0
Hypertext Transfer Protocol (HTTP/HTTPS)

10400455-002 ©2008-14 Overland Storage, Inc. 14
SnapScale/RAINcloudOS 4.1 Administrator’s Guide 1 - Overview
What’s New in RAINcloudOS 4.1
NOTE: For details and descriptions of all the new features and a list of other improvements to the
operating system, see the Product Release Notes on the Overland SnapScale website.
Network Security • Microsoft Active Directory Service (ADS) (member server)
• Unix Network Information Service (NIS) user/group UID/GID
translation
• LDAP user/group UID/GID translation
• File and Folder Access Control List (ACL) Security for Users and
Groups
• Secure Sockets Layer (SSL v2/3) 128-bit Encryption
• Target Challenge Handshake Authentication Protocol (CHAP) for
iSCSI
• SMTP Authentication and support for email encryption (STARTTLS
and TLS/SSL encryption protocols)
Network Client Types • Microsoft Windows 2003/2003 R2/2008 SP2/2008 R2 /XP SP3/
Vista SP2/7/8/2012
• Mac OS X 10.5/10.6/10.7/10.8/10.9
•SunSolaris10and11
•HP-UX11
• AIX 5.3/6
• Red Hat Enterprise Linux (RHEL) 4.x/5.x/6.x
• Novell SuSE Linux Enterprise Server (SLES) 10.x/11.x
Data Protection • Snapshots for immediate or scheduled point-in-time images of the
cluster filesystem
• Support for local backup with Symantec NetBackup/Backup Exec
Remote Media Server for Linux
• Support for network backup with Symantec NetBackup/Backup
Exec, CA ARCserve, or EMC NetWorker
•APC
®brand Uninterruptible Power Supply (UPS) with Network
Management Cards, a USB interface, or a serial interface (with USB-
to-Serial adapter) are supported for graceful system shutdown
DHCP Support • Supports Dynamic Host Configuration Protocol (DHCP) for automatic
assignment of IP addresses
System Management • Browser-based administration tool called the Web Management
Interface
• SnapServer Manager utility (platform independent)
• Read-only CLI support
• SNMP (MIB II and Host Resource MIB)
• User disk quotas for Windows, Unix/Linux, FTP/FTPS
• Group disk quotas for Unix/Linux
• Environmental monitoring
• Email event notification
• Data importation (migration)
Feature Specification

10400455-002 ©2008-14 Overland Storage, Inc. 15
SnapScale/RAINcloudOS 4.1 Administrator’s Guide 1 - Overview
With the release of the latest version of RAINcloudOS, the following features and
functionality are now available:
RAINcloudOS 4.0 Features
NOTE: For details and descriptions of all the new features of the operating system, see the Product
Release Notes on the Overland SnapScale website.
With the release of RAINcloudOS 4.0, the following features and functionality are now
available:
Feature New Functionality
NFSv4 Support In addition to NFSv3 default support, the option now exists
to enable NFSv4.
Online/Rolling Updates Added a new OS update process that allows the cluster to
still be online and available during the entire update
process. However, performance will be reduced and some
administrative features will not be available.
Snapshots Performance
Optimization
File write performance is significantly improved when one
or more snapshots exist for a volume.
LDAP Integration Lightweight Directory Access Protocol (LDAP) can be used
to look up user/group names and UIDs/GIDs for quota
assignment, ID mapping, and home directories.
BitTorrent Sync BitTorrent Sync can be used to replicate data between the
SnapScale cluster and other servers or workstations.
Windows Security Model Volumes can be configured with a security model that
permits only Windows personality file system permissions
(ACLs).
Performance Monitor Completely redesigned with a new interface and
functionality including the ability to keep more than just
one hour of data enabling the user to review network
performance information going back several weeks or
months.
Feature New Functionality
iSCSI Support SnapScale can now create and host iSCSI disk targets on
the cluster file system. These iSCSI disks can register with
an iSNS server, and can also be managed by Windows
VSS/VDS.
SMB2, FTP/FTPS, and SNMP
Support Added
SMB2, FTP/FTPS, and SNMP are all now supported in
RAINcloudOS.
Improved Network Monitoring The Network Monitor page provides additional information
including high-water marks, network activity for the whole
cluster, and clearer labels.
Added User/Group Quotas per
Volume
Storage consumption and file count quotas can now be
configured for users and NIS groups per volume.
SMB 2.0/2.1 The server supports Server Message Block (SMB) version
2.0/2.1 for improved compatibility and performance for
later Windows OS versions.

10400455-002 ©2008-14 Overland Storage, Inc. 16
SnapScale/RAINcloudOS 4.1 Administrator’s Guide 1 - Overview
Using SnapServer Manager with SnapScale
SnapServer Manager (SSM) is a Java-based application that runs on all major client systems.
SSM provides a single screen from which administrators can discover all SnapServer servers,
REO appliances, SnapSAN arrays, SnapScale clusters, and SnapScale Uninitialized nodes
(that is, nodes that are not part of a SnapScale cluster) on their network.
SnapServer Manager Installation
You can download and install SSM by navigating to the Overland Storage NAS website and
downloading the SnapServer Manager executable file. SSM can be installed to several client
platforms, including Windows, Mac OS X, and Linux.
Refer to the SnapServer Manager User Guide for details on discovering and configuring
SnapScale clusters.
Client and Storage Networks
SnapScale requires two separate networks to function correctly: A public network (Client) and
a private network (Storage). To support failover, two Storage network switches must be
connected together (using a 1GbE or 10GbE cable between the switches). Each of the two
Storage network ports on the node need to be connected to a different Storage switch.
Data Balancer & Spare
Distributor Improved
Data Balancer (formerly Capacity Balancer) redistributes
files to optimize performance. Spare Distributor (formerly
the Spare Disk Balancer) evenly distributes spare drives
across nodes. Both have been improved for faster results.
Feature New Functionality
Server List
Status Bar
Server
Group

10400455-002 ©2008-14 Overland Storage, Inc. 17
SnapScale/RAINcloudOS 4.1 Administrator’s Guide 1 - Overview
Node/Switch Cabling Example
The following example shows three dual 10GbE card X2 nodes and how to connect them to the
network switches. The cables used to connect to the Client side of the network (blue) originate
from the Client 10GbE card in slot 1. Two cables are used to connect both ports of each node to
the Client switch.
The cables used to connect to the Storage side of the network (orange) originate from the
Storage 10GbE card in slot 2. For each node, one cable is used to connect a one Storage port of
each note to one of the two Storage switches used for failover.
For connections between 10GbE cards and 10GbE switches, use either direct-attached copper
cables or fibre cables with SFP+ modules pre-installed in the card and switch ports.
NOTE: If using fibre cables, you must use Overland-approved SFP+ modules. With the cluster
powered OFF, insert the modules into the card and switch ports. Connect the fibre cable
between the two SFP+ modules and restore power to the cluster.
Node Port Configurations
Both the X2 and X4 nodes come in three different configurations: 1GbE ports (both Client and
Storage ports), a single 10GbE card (with 1GbE Client ports), and dual 10GbE cards.
NOTE: If desired, optional 10GbE cards can be added later to upgrade the node.
X2 Node Configurations
Basic 1GbE. At the rear of the X2 node, the 1GbE ports connected directly to the motherboard
are configured to access the Client and Storage networks.

10400455-002 ©2008-14 Overland Storage, Inc. 18
SnapScale/RAINcloudOS 4.1 Administrator’s Guide 1 - Overview
Single 10GbE. The single-card 10GbE configuration uses the two 1GbE ports for the Client
connection and the two 10GbE ports on the card for the Storage connections.
Dual 10GbE. The dual-card configuration uses the left 10GbE card ports for the Client
connections and the right 10GbE card ports for the Storage connections. The 1GbE ports are
not used.
Configuration Node GbE Ports Network Switch
Basic 1GbE X2 Ports 1 & 2 Client (public)
Slot 2 1GbE Card
(ports 3 & 4)
Storage (private)
Configuration Node GbE Ports Network Switch
Single 10GbE X2 Ports 1 & 2 Client (public)
Slot 2 10GbE Card
(ports 3 & 4)
Storage (private)
Configuration Node GbE Ports Network Switch
Dual 10GbE X2 Slot 1 10GbE Card
(ports 1 & 2)
Client (public)
Slot 2 10GbE Card
(ports 3 & 4)
Storage (private)
3
4
1
2Client
Storage
1GbE Card
Client
Storage
10GbE Card
3
4
1
2
Client Storage
10GbE Cards
3
4
1
2

10400455-002 ©2008-14 Overland Storage, Inc. 19
SnapScale/RAINcloudOS 4.1 Administrator’s Guide 1 - Overview
X4 Node Configurations
Basic 1GbE. At the rear of the 1GbE configuration, there are two sets of 1GbE ports connected
directly to the motherboard for connecting to the switches. The top two are for the Client
network; bottom two for Storage.
Single 10GbE. The single-card 10GbE configuration uses the two 1GbE ports for the Client
connection and the two 10GbE ports on the card for the Storage connections.
Configuration Node GbE Ports Network Switch
Basic 1GbE X4 Ports 1 & 2 Client (public)
Ports 3 & 4 Storage (private)
Configuration Node GbE Ports Network Switch
Single 10GbE X4 Ports 1, 2, 3, & 4 Client (public)
Slot 7 10GbE Card
(ports 5 & 6)
Storage (private)
Client
Storage
3
4
1
2
Client
Storage
5
6
10GbE Card
3
4
1
2

10400455-002 ©2008-14 Overland Storage, Inc. 20
SnapScale/RAINcloudOS 4.1 Administrator’s Guide 1 - Overview
Dual 10GbE. The dual-card configuration uses the left 10GbE card ports for the Client
connections and the right 10GbE card ports for the Storage connections. The 1GbE ports are
not used.
Configuration Node GbE Ports Network Switch
Dual 10GbE X4 Slot 6 10GbE Card
(ports 7 & 8)
Client (public)
Slot 7 10GbE Card
(ports 5 & 6)
Storage (private)
Storage
Client
Unused
10GbE Cards
3
4
1
2
5
6
7
8