Owon KF205 User manual

KF205 Key Fob
Quick Start Guide

2
Introduction
1
The KF205 ZigBee Key Fob is used to on/off various
types of devices such as bulb, power relay, or smart
plug as well as to arm and disarm security devices by
simply pressing a button on the Key Fob.
This guide will provide you with an overview of the
product and help you get through the initial setup.

3
2Get to know your device
1,2. On/off button
• On/off control. Press ( ) to turn on or ( ) to turn off
the paired device.
• Pair mode. Press and hold the on (or off) button for
about three seconds until the LED indicator flashes
green once to enter pair mode, the LED indicator will
flash green three time indicating pairing success.
1
5
2
3
4

4
3,4. Arm/disarm
Press ( ) to arm and ( ) to disarm the security
system.
6
6. Battery compartment
Insert battery here to power on the Key Fob.
5. LED Indicator

5
7
8
7. Lock button
You can lock/unlock the Key Fob by switching the side
lock (you cannot use the Key Fob when it is locked).
8. Reset button
Press and hold the reset button for ten seconds until
the LED indicator flashes green once to restore the Key
Fob to default factory setting.

6
3Get started
3.1 To get started, you will need:
A Smart Gateway
The mobile app
3.2 Connect to gateway’s network
1. Set your gateway to permit joining.
2. Pull out the pull tab to power on the Key Fob. Press
the reset button once and the LED indicator will flash
red for three times indicating the Key Fob is ready to
join the gateway's network.
3. The Key Fob will join the gateway’s network
automatically. The LED indicator will flash green for
three times when it has successfully joined.
4. Now you can use the Key Fob to arm/disarm the
security system.

7
3.3 Pair with other device
The Key Fob can be paired with an on/off device (smart
plug, LED bulb, circuit breaker, ect.) to control its on/
off status, please make sure the on/off device is in the
same network before pairing. (The KF205 can only be
paired with one device).
1. Enter the on/off device into pairing mode (choose
identify in mobile app).
2. Press and hold the on or off buttons of the Key
Fob for three seconds until the battery LED indicator
flashes once in green.
3. The status LED indicator of the Key Fob will flash
green for three times indicating that the device has
successfully paired.
4. Now you can use the Key Fob to control the device
locally.

8
4Technical Specifications
Battery • CR2450V 850Mah Lithium battery
Working
Temperature • -10°C~+45°C
Humidity • <=85%RH
Networking Mode • ZigBee 2.4GHz IEEE 802.15.4
Networking
Distance
• Outdoor/Indoor range:
(100m/30m)
Operating Ambient
• Temperature: -10~45°C
• Humidity: up to 85%
non-condensing
Dimensions • 37.6(W) x 75.66(L) x 14.48(H) mm
Weight • 31 g

9
5Safety Notice
WARNING: Failure to follow these safety notices
could result in fire, electric shock, other injuries, or
damage to the Key Fob and other property. Read all
the safety notices below before using the Key Fob.
• Avoid high humidity or extreme temperatures.
• Avoid long exposure to direct sunlight or strong
ultraviolet light.
• Do not drop or expose the unit to intense vibration.
• Do not disassemble or try to repair the unit yourself.
• Do not expose the unit or its accessories to
flammable liquids, gases or other explosives.