Oxdale se400 Manual

Operating and Maintenance
Instructions
Keep for future reference
SE400 Log Splitter
1

2
Index
INDEX............................................................................................................................................2
LABELS…………………………………………………………………………………………………….3
SAFETY..........................................................................................................................................4
QUICK GUIDE including storage and transport…..........................................................................5
IN DEPTH INSTRUCTIONS...........................................................................................................6
WARRANTY INFORMATION........................................................................................................ 11
TECHNICAL SPECIFICATIONS…………………………………………………………………………12
CONTACT DETAILS.......................................................................................................................13
WARRANTY REGISTRATION FORM............................................................................................14
DECLARATION OF CONFORMITY…………………………………………………………………….15

3
Safety
OXDALE PRODUCTS REQUIRES THAT ANYONE OPERATING OR MAINTAINING THE
LOG SPLITTER SHALL READ AND UNDERSTAND ALL SAFETY, OPERATION AND
MAINTENANCE DATA CONTAINED IN THIS USER MANUAL BEFORE USING THE LOG
SPLITTER.
The log splitter is powered by a Honda Engine. A copy of the Honda owner’s manual should accompany
this instruction manual. Please contact us if this is missing. Hydraulic action provides the force to drive a
splitting wedge into a log. Never operate the log splitter if unauthorized persons are in the area, especially
small children. Hazards associated with log splitting may be pinch points, splinters, eye injury, and
entanglement . It is for SINGLE PERSON USE ONLY.
You are responsible for the safe operation and maintenance of the log splitter. The most
important safety device on the equipment is a safe operator.
• Never put hands or fingers between wedge and log to be split or near moving parts. Always
stop the machine before cleaning it or making adjustments.
• The operator should wear suitable PPE including eye protection, gloves, ear protection and
safety boots. Close fitting clothing should be worn to reduce risk of entanglement. The safety
decals and other labels on the machine are shown on the following page.
• Never stand either side of the log splitter while operating. Logs can sometimes split apart
violently eg due to knots. Stand in front of the machine to minimize risk from falling debris.
• Never hold top of log while setting in place or splitting. Never split two logs on top of each
other.
• The log splitter is very powerful, but some hard or wet wood can be difficult to split. Do not
force the wedge as this could cause injury to yourself and damage to the log splitter.
• Never let children operate machinery. Do not leave machine unattended when running.
• Both ends of each log should be cut as square as possible to help prevent log from riding out
of splitter. This is also aided by the three holes in the log platform having raised edges to
reduce the risk of slipping.
• Always choose a working area free from obstructions and then keep the working area free from
obstructions such as logs and split wood.
• Machine is for single person operation only using both hands on the operating lever.
• Operate splitter on solid level ground. Always ensure parking brake is engaged on tractor.
• The log splitter is designed only for splitting wood. Using it for any other purpose may damage
itand be dangerous to the user and others.
• Ensure that the machine is secured using wheel blocks if necessary during use, and stored
safely when not in use in a dry place.
• Ensure that Honda engine manual and its safety decals are also referred to.

4
Safety labels & decals
The SE400 log splitter should have the following labels attached. If any safety decals are
missing or illegible they should be immediately replaced.
• The following safety decals:
• The following warning notices:
WARNING!
"Danger! Keep clear of moving parts!“
"To be operated by one person only!“
"Wear hearing protection!"
“Read instruction manual before use!”
• Other information:
Oxdale’s name and address
Year of construction
Machinery type
Mass of machine
Serial number
Maximum hydraulic oil operating pressure

5
Quick Guide
Before first use
Before the log splitter can be used for the first time.
• Fill the engine with engine oil.
• Fill the engine with petrol.
•Fill the hydraulic oil tank.
• Ram collar to be greased.
Pre-Operation Checklist
It is important for both personal safety and maintaining the good mechanical condition of the log
splitter that this checklist is followed:
• Grease slider every 10 hours of operation and pre / post season.
• Check that all hydraulic fittings & connections are tight and in good condition.
• Check for damaged, worn, missing parts and replace if necessary.
• Replace missing or illegible safety decals.
Operating Instructions
• Position the log splitter on solid level ground when operating.
•Start the engine and adjust the throttle to suit the work being done (check the
engine manual for details).
•Using both hands lift the handle to lower the ram, and lower the handle to raise the
ram.
• Operate ram to lift wedge above height of log to be split.
•Position the centre of the log under the wedge. Move the wedge until contact is
made with the log.
•Keep two hands on control levers while splitting log. The speed can be controlled by
how much pressure you put on the control valve.
• Stop splitting if log starts to go sideways and reposition per above instructions.
•Should the wedge lodge or become stuck in the log, return wedge to fully open
position and gently rock log free before continuing.
Post Operating checks & maintenance Instructions
• Wipe off your log splitter with a damp cloth periodically to keep it free from debris.
• It is recommended that you store your splitter in a dry place when not in use.
• The splitting wedge may need to be sharpened periodically, just using a file.
Storage and Transportation
• The SE400 should be stored in the upright vertical position only.
• Store in a dry location
• Store in a safe location where the machine will not get knocked over
• The SE400 should be transported in a vertical position. It should be strapped securely.

6
In-depth instructions.
Before first use.
Fill the engine with engine oil and petrol
The log splitter has to be supplied / shipped without any oil installed. Before the engine can be
started for the first time it needs to be filled with engine oil and petrol. Please see the engine
manual for details on filling the oil and petrol.
Petrol Filler Cap
Filling tank with hydraulic oil
Oil Filler Cap
The hydraulic tank holds approximately 14 litres of hydraulic
oil, we would recommend using ISO 46 type oil. The tank is
filled through the filler cap on top of the unit. Pour the oil in
until you have filled the tank as indicated on the level gauge.
Please note that once the unit has been run for the first time and
the pump filter and pipe work filled you will need to top up the
tank.
Filler Cap
Level Gauge
Greasing
The ram collar needs to be greased where it slides down the guide; this will help to reduce the
friction and help the unit run more smoothly. This needs to be carried out every 10 hours or
alternatively at the start of each day.

Operating Instructions
The log splitter is designed for splitting logs onlyAND IS FOR SINGLE PERSON USE. It can
handle logs no bigger than 450mm high and having a diameter no bigger than 900mm and no
smaller than 75mm diameter. Only persons competent to do so and having read in full this
manual should use this log splitter. Before using the log splitter for the first time each day carry
out a visual inspection taking note of any damage and leakages and ensure that they are fully
repaired before using.
Position the unit on solid, and, as far as possible, level ground when operating the log splitter. Use
wheel blocks if necessary to prevent movement of the machine. At all times when the ram is being
both extended and retracted both hands need to be kept on the handle. Lifting the handle will
extend the ram and lowering the handle will retract the ram.
The handle will return itself to the
neutral position when not lifted or
lowered, in this position there will
be no movement of the wedge.
With both hands on the handle lift to
lower the wedge.
7

8
Lowering the handle will lift the
wedge.
Pick your log to be split; the log should have been cut square at both ends. This is very important
as it will reduce the chance that the log will slip. Position the log under the wedge with the point of
the wedge in the centre of the log; place both hands on the handle and lift to lower the wedge into
the log. Stop lowering the wedge if the log starts to go sideways and reposition. If the wedge gets
stuck return the wedge to the fully open position and rock the log free before continuing. When
splitting wood always stand in front of the unit and not to the side as logs can split with some force
and be thrown off the unit to the sides. Always keep other people and pets/animals out of this area
when splitting logs.

9
Post Operating Checks & Maintenance Instructions
Switch off the machine before any cleaning or adjustment of the machine takes place. At the end
of each day’s work the unit should be cleaned. The removal of wood chips etc. from the unit is
advisable as well as removing contaminated grease for the wedge collar. Sharpen the wedge as
and when required; this can be done with a file. Check for any loose bolts or other damage. at
regular intervals. If the log splitter is going to be stored then this should be in a dry location in the
upright vertical position.
Hydraulic System.
Periodically check the hydraulic oil level with the gauge on the side of the unit, top up if required.
Check also for oil leaks, worn hoses and loose
fittings; please note that the pressure within
the hydraulic system can exceed 2000 pounds
per square inch (psi). Reinforced hoses
develop pin hole leaks and hydraulic
connections can vibrate loose. Hydraulic leaks
may be hard to see. Never check for these
leaks with your hand. The high pressure can
inject oil droplets under your skin. Oil injected
under your skin is a medical emergency and
will require immediate medical care. When
checking hoses and fittings these can become
very hot from heavy use. Place your hand
near the connection to sense for heat before
touching the connection. If hot, allow the hydraulic system to cool down before touching the heated
connections. Hydraulic pumps and control valves operate with minute clearances (tolerances).
Grit, grime, and dirt pushed through these openings can eventually wear the
surfaces and damage the system. Clean hydraulic oil must be used. The fill
area and connections must be kept clean as well. Dirt is the greatest source of
hydraulic system damage.
Filter element replacement; remove the top cover on the filter body and using
the handle on top of the filter remove from the filter body. Replacement is a
reversal of removal.
Looking after the hydraulic oil is very important; keeping the oil free from
contamination will reduce the need to change the oil. If you need to change the
oil you can drain the oil through the feed pipe to the pump. Remove the pipe
from the pump and drain into a suitable container, if you are replacing the oil
then replacement of the filter element is also required. Replace the pipe and
filter before refilling the tank. Check the oil level once it has been run and top up as required.

Greasing.
Keep the collar guide of the unit well-greased, this will help the log splitter run more smoothly.
Grease the collar guide
10

Warranty information
Warranty claims which arise as a result of incorrect operation, insufficient maintenance or the
use of non-approved consumables, e.g. lubricants, hydraulic oils will not be accepted by the
manufacturer.
Only original Oxdale parts may be used. When ordering replacement parts, please provide the
model name and number. Pressure adjustments to the valves must only be carried out by Oxdale
authorized dealers.
No liability is accepted for damage caused by Oxdale products in so far as they are caused by
incorrect repairs or the non-use of original Oxdale replacement parts or in so far as repairs have
not been carried out by Oxdale or a pre-authorized specialist, the same applies to auxiliary parts
and accessories.
All warranty claims are on a return to manufacturer basis.
Pressure adjustments to the valves must only be carried out by Oxdale authorized dealers.
All Oxdale products have a full 12 months warranty, please ensure that you fill in the warranty
page and return immediately.
11

Technical Specifications –SE400
Log Splitter
Log Splitter Ram
Model number
Weight
101kg
Max pressure
4780 psi / 330 Bar
Ram Bore diameter
60mm
Ram Stroke
400mm
Ram rod diameter
40mm
Engine
Honda GX200
Pump
Saturn Group 2 E-10-N
HP
5.5 at 3600 rpm
Input speed
3000 rpm
Fuel Consumption
1.9 L/hr
Torque
33 n/m
Noise Level
92 db(A)
Displacement
5 cc/rev
Flow
15 l/min
Max continuous pressure
250 bar / 3625 psi
Max peak pressure
290 bar / 4200 psi
Filter
MP Filtri MPF0301AG-
1P25NB
Spool Block
MB2
Type
Return
Max continuous pressure
250 bar / 3600 psi
Filter Code
0301P25NB
Max peak pressure
320 bar / 4600 psi
Max back pressure on port T
30 bar / 430 psi
Port marked P
Pressure Line
Port marked T
Exhaust Line
Relief valve setting
220 bar / 3150 psi
12

Contact details.
Oxdale Products can be contacted using the details below; these details can also be used for
ordering spare parts.
Oxdale Products
Units 20-21,
Foxwood Road,
Off Sheepbridge
Lane,
Chesterfield,
S41 9RF
Tel:-01246 529020
Fax:-01246 812722
Mobile:-07813 111885
Email:- [e-mail]
Our web site can be viewed at www.oxdaleproducts.co.uk
13

Warranty Registration form
Name …………………………………………………………………………
Address …………………………………………………………………………
…………………………………………………………………………
…………………………………………………………………………
Post Code …………………………………………………………………………
Tel No …………………………………………………………………………
Mob …………………………………………………………………………
Email …………………………………………………………………………
Serial No …………………………………………………………………………
Model No ……………………………SE400……………………………………
Date of Purchase…………………………………………………………………………
Please ensure that all details are correct and return to
Oxdale Products
Units 20-21,
Foxwood Road,
Off
Sheepbridge
Lane,
Chesterfield,
S41 9RF

14