Oxford & Garden CAPRI TABLE CP34TA User manual

34” CAPRI TABLE
ITEM - CP34TA
O X F O R D G A R D E N
O X F O R D G A R D E N
1729 Research Drive, Unit A Louisville, Kentucky 40299
877.866.3331 (fax) 502.719.8888
Assembly Instructions page 1 34” Capri Table
Components
1Table Top Assembly
QUANTITY: 1
2Corner Posts
QUANTITY: 4
Hardware
Metal Washers
QUANTITY: 8
Hex Nuts
QUANTITY: 8
A
B
3Parasol Hole Cap
QUANTITY: 1
QUANTITY: 1
Hex Head Wrench
Tools (included)
About Acacia Wood
Wood Care Instruction
Acacia is a plantation grown hardwood, high in oil content. It is resistant to weather,
rotting, and bug infestation.
A seasonal cleaning may be desired. This can be done easily with a mild solution of water,
laundry detergent and a little bleach. Just rinse the furniture and using a sponge or soft
bristle brush scrub the furniture with the solution. Lastly, rinse the furniture with fresh
water. Although Acacia weathers well we recommend a routine application of Cabot’s
Australian Timber Oil in umber brown in extremely dry climates. A routine oiling is also
recommended for furniture to be used for dining purposes to discourage staining from
food and drink spills.
To restore the original wood color, Oxford Garden suggests applying Cabot’s Australian
Timber Oil in brown umber (available through Oxford Garden) after cleaning. Paint or any
products with polyurethane are not recommended, as application of these products will
void the warranty.
For additional information regarding our warranty, please visit www.oxfordgarden.com

Step 1
On a clean flat surface, lay table top upside down.
Step 3
Step 3 (detail)
Step 2
Insert the threaded rods on one corner post into
holes located on one corner of table top.
Step 5
Carefully turn the assembled table in an upright position.
Assembly Instructions page 2 34” Capri Table
Step 4
Secure corner post to the table top using metal washer
and Hex Nut .
Repeat steps 2 and 3 for the remaining 3 corner posts.
1
1
2
2
A
A
B
B
A
A
B
B