Oxford & Garden SIENA S52 User manual

15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 877.866.3331 f. 502.719.8888 oxfordgarden.com
Ver. 06.30.20
SIENA LOVESEAT - S52
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
FINISHING ITEMS
Medium Grit Sandpaper
Note: Hardware pack may contain extra hardware
NOTE: If the furniture is going to be placed on a concrete or tile patio, it should first be rinsed well to
remove the sawdust that may cause some staining.
24
3
Long Bolt
Quantity: 2
A
Short M6 x 35 mm Bolt
Quantity: 6
B
Guiding Bolt
Quantity: 1
C
Barrel Nut
Quantity: 1
D
8mm Dowel
Quantity: 12
E
Wood Screw
Quantity: 1
F
Allen Wrench
Quantity: 2
G

Ver. 06.30.20
STEP 4
Using the provided allen wrench and guiding bolt ,
secure seat with barrel nut and SHORT bolt as
shown.
How to align barrel nuts and bolts.
Insert a guiding bolt into the end of a barrel nut . Align the barrel nut inside of the component with the bolt used to connect the
components. Once the component bolt is aligned and threaded, simply pull the guiding bolt from the end of the
barrel nut.
STEP 2
See bottom notes on how to align barrel nuts and bolts.
Using the provided allen wrench and guiding bolt ,
secure TOP of the back with barrel nut and LONG
bolt as shown. Secure BOTTOM of the back as shown
using barrel nut and SHORT bolt .
NOTE: Do not tighten down in this step, leave loose until
all bolts are inserted, then tighten all bolts. Be certain not
to over tighten.
INSTRUCTIONS
STEP 1
Two Person Assembly Recommended
NOTE: This item uses tight tolerances, it is important to follow
the steps in the order shown here.
Lay leg assembly on flat surface and insert back assembly .
Ver. 2019.08.10
STEP 3
Next, insert the seat assembly into the rest of the
assembled parts.
STEP 5
Insert the remaining leg assembly into the assembled
parts and repeat steps 2 and 4 to secure. Next,
further secure the seat to the leg assemblies by driving
two dowels into the mortise holes as shown.
Step 6
Lastly, go back and tighten all the bolts inserted previously
and insert one wood screw into the seat assembly as shown.
F
4

2
4

4
A
B
D
C
2
B
C
D
2
B
B
D
D
E
E
F
F
A
D
D
B
