OXO GOOD GRIPS 1327780 User manual

Sweater Dryer
INCLUDES
Straight Side Pole
B
Jointed Side Pole A
1
Unfold Jointed Side Poles (A) so they are straight.
Lay netting out flat with Jointed Side Poles (A) parallel.
Note: Make sure corners are positioned smooth side
down and that the legs are on top of the mesh netting.
This ensures the bottom of the Dryer is facing up.
B
A
2
Insert Straight Side Poles (B) into sleeves in netting
on both sides.
B
3
Make sure legs are still on top of netting. Push down
button on corner piece and slide piece into Straight Side
Pole (B) until button pops through hole. Repeat with all
corner pieces.
Note: Slide netting closer to corners if more slack is
needed when connecting Straight Side Poles (B).
B
ASSEMBLY INSTRUCTIONS
OVER
www.oxo.com

Connect all four legs for stacking.
STACKING
www.oxo.com
4
Fold out all four legs. Flip the Dryer right side up.
2
1
Fold in all four legs and fold the Dryer in half using
the Jointed Side Poles (A).
STORAGE
A