OYPLA DIY 3222 User manual

User Manual
USER MANUAL Model No: 3222
Mounted Rubber Kerb Ramp

•This product is not a toy, and is only to be used for its designated purpose.
•Never carry out any alterations or modifications to this product.
•This product is intended for outdoor use only.
•When lifting a ramp, make sure you do so correctly to avoid injury from mishandling as each
ramp weights 10KG.
•Ensure that the ramps are positioned on firm flat ground before attempting to use, this
removes the possibility of the ramps tipping.
•Check for dirt/debris on the ramp surface as this could cause the ramp to become slippery.
•Clean only with a damp cloth. Do not use strong industrial cleaning substances or abrasive
materials as these will damage the product. Be sure to dry the ramps correctly as the ramps
may become slippery and unusable if not.
•If the product is damaged or has any defects, please contact [email protected]
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 3222
Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX