OYPLA Home 4283 User manual

User Manual
USER MANUAL Model No: 4283
Clothes Airer

This product is intended for indoor and outdoor use.
This product contains small parts that could be a choking hazard if swallowed. Keep these items away
from children.
Unpacking –Only an adult with the guide of the assembly instructions should unfold this product.
This product is not intended for use by persons (including children) with reduced physical, sensory
and mental capacities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the product by persons responsible for their safety.
This product is not a toy and should only be used for its designated purpose.
Do not carry out alterations or modifications to this product.
Make sure the stand unfolded fully and secured before use. Hang clothes evenly on arms to keep the
balance.
Never exceed the maximum load capacity of 15kg, or it may result in product failure and/or personal
injury.
Wash/rinse with clear water and only clean with a damp cloth. Do not use strong industrial cleaning
substances.
Only use this product on stable, level and dry ground.
Keep away from fire.
Pinch points can cause personal injury.
Keep fingers, loose clothing, and hair away when unfolding and folding the product.
Do not discard any of the packaging until you have checked that you have all of the parts and fittings
required.
If the product is damaged or has any defects, please contact [email protected]
Safety Instructions
Notice: This manual contains important information regarding the operation, safety and
maintenance of the product. Read and understand the manual before using the product,
and save this manual for future reference.
USER MANUAL Model No: 4283

G
C
Parts list:
Please check you have all parts below before attempting to assemble this product.
If you are missing any of the parts below, please contact Oypla customer services: [e-mail]
“Please be aware you will be referring to this parts list throughout the assembly process”
PART/NAME
QTY
Feet cap –Part A
X4
Legs –Part B
X4
Leg support –Part C
X1
Large Pole –Part D
X1
Small Pole –Part E
X1
Pole Connector –Part F
X1
Top Cap –Part G
X1
3 Arm Hanger –Part H
X1
8 Upper arm –Part I
X1
Pegs –Part J
X24
Assembly Instructions
B
I
F
E
H
D
E
A
J
USER MANUAL Model No: 4283

1) To start, attach part Ato one end of part B. Repeat this step for all of the legs and feet caps
(Aand B).
2) Then secure the other end of a leg (B) into the leg support (C). Ensure legs are securely
fastened and repeat with the remaining legs. Some force/firm pressure may be required to
do this step.
3) Next, attach the large pole (D) into the leg support (C) as seen on the diagram on the previous
page.
4) Attach the pole connector (F) onto the top of the large pole (D) before sliding the 3-arm
hanger (H) onto the connector. As seen on diagram.
5) Now, attach the small pole (E) onto the pole connector (F). Ensure securely fastened.
6) Lastly, attach the top cap (G) on top of the small pole (E). To finish assembly place the upper
arm (I) on the top of the top cap (G)
Attach desired amount of pegs (J) to the hooks on the upper arm (I). There are 8 arms and
each can hold 4 pegs (24 total)!
USER MANUAL Model No: 4283

Folding Instructions
Imported by Oypla.com LLP, Uxbridge, UB8 2FX
USER MANUAL Model No: 4283