OYPLA Home 3987 User manual

Page 1
Manual Version: v1.0
Model Code: 3987
Oypla.com LLP / www.oypla.com
User Manual
Model Code: 3987
Contents
1Front Cover
-
2Safety
Instructions
-
2Assembly
Instructions
-
3Back Cover
End
45 Key Cabinet

Page 2
Manual Version: v1.0
Model Code: 3987
Oypla.com LLP / www.oypla.com
Parts List:
-If you are missing any of the below parts, please contact [email protected]
-Please be aware that you will be referring to this parts list throughout the assembly
process.
Contents
1Front Cover
-
2Safety
Instructions
-
2Assembly
Instructions
-
3Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
This product should only be used
for its designated purpose.
Make sure all bolts are secured
before using this product. The
user is fully responsible for
ensuring the safe is mounted
securely before use.
This product is intended for
indoor use only.
Do not exceed the key limit of
forty-five.
This product is not a toy, and is
only to be used for its designated
purpose.
Do not carry out alterations or
modifications to this product.
This product contains small parts
that could be a choking hazard if
swallowed. Keep these items
away from children.
Do not discard any of the
packaging until you have checked
that you have all the parts and
fittings required.
If the product is damaged or has
any defects, please contact
[email protected].
Assembly Instructions

Page 3
Manual Version: v1.0
Model Code: 3987
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
2Assembly
Instructions
-
3Back Cover
End
1. Place the 45 Key Safe against the surface you wish to mount it on and
mark the holes in the safe onto the surface. *Ensure to check for pipes
and/or cables in the mounting surface prior to mounting.
2. Once done, drill small holes into the surface that the 45 Key Safe is up
against.
3. Push wall anchors into each of the holes, ensuring the go in as far as they
can.
4. Screw the wall screws into the wall anchors and the drill both into the
surface.
Once completed, make sure that the 45 Key Safe is secured correctly to the
desired surface. You can do this by attempting to move the safe.