OYPLA Home 4812 User manual

Page 1
Manual Version: v1.0
Model Code: 4812
Oypla.com LLP / www.oypla.com
User Manual
Model Code: 4812
Contents
1Front Cover
-
2Safety
Instructions
-
3 Assembly
Instructions
-
4Before First Use
-
4 For Best Results
-
5Back Cover
End
5pc Copper Pan Set

Page 2
Manual Version: v1.0
Model Code: 4812
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
3 Assembly
Instructions
-
4Before First Use
-
4 For Best Results
-
5Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
Never use any pan if the handle is
damaged.
Never use steel wool or abrasive
scouring agents to clean the
product, as these may damage
the product.
Periodically check the handle
screw and tighten when needed.
In order to ensure a good heat
transfer, place the pan centrally
on the hob plate.
Always keep a close eye on the
cooking process.
Keep out of reach from children.
The pans are dishwasher safe.
Before using the product, ensure
the handle screws/fixings are
tightly in place. This should be
checked periodically by an adult.
Do not use metal or sharp utensils
that may damage the non-stick
coating.
Only use kitchen utensils made
from plastic, wood or silicone.
Check your pan before first use
for material residues, especially at
the bottom of the pan to avoid
scratches.
Do not slide the pan on the hob,
always lift it to move it.
Never make adjustments or
modifications to this product.
This product is not a toy, and is
only to be used for its designated
purpose.
Allow pans to cool completely
before cleaning them.
Always rinse thoroughly and dry
immediately with a soft towel.
If the product is damaged or has
any defects, please contact
[email protected]
Warnings
Do not use the cookware
directly under the grill, as the
intense heat could damage the
non-stick coating and the
handle.
This product is oven safe up to
160 degrees Celsius.
Never immerse a hot pan in cold
water, as this might cause
irreparable warping.

Page 3
Manual Version: v1.0
Model Code: 4812
Oypla.com LLP / www.oypla.com
Parts List:
If you are missing any of the below parts, please contact
[email protected]m
Please be aware that you will be referring to this parts list throughout the
assembly process.
PART
LETTER/QTY
A/ 3 PCS
B/ 3 PCS
C/ 3 PCS
D/ 3 PCS
E/ 3 PCS
Contents
1Front Cover
-
2Safety
Instructions
-
3 Assembly
Instructions
-
4Before First Use
-
4 For Best Results
-
5Back Cover
End
Assembly Instructions
Firstly, place part B on the top of the lid (part E) so it’s widest part is
touching the glass. Then place part A (handle/knob) on top of part B. To
secure these in place, place a washer (part C) on the underside of the lid
(part E) and whilst holding all parts together, screw part D in the pre
drilled hole. Ensure firmly tightened.
Repeat the above steps with the remaining 2 lids and parts until all 3 lid
handles are secure.

Page 4
Manual Version: v1.0
Model Code: 4812
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
3 Assembly
Instructions
-
4Before First Use
-
4 For Best Results
-
5Back Cover
End
Before First Use
Wash the pans in hot soapy water to ensure that the manufacturing
residues are all removed.
Before cooking, season the pans by wiping the surface with a small
amount of oil, and heating the pan over a medium heat for two
minutes. When cool, wipe with a sponge and mild detergent, and
rinse.
For Best Results
Allow food to rest at room temperature for about ten minutes before
cooking.
Preheat the pan and oil carefully –do not allow the pan to overheat
without food.
Use a high heat setting for boiling and reducing liquids.
Use a medium to high setting for frying.
Use a low setting for simmering, making sauces and warming foods.
The ceramic coating does not require the use of butter or oil for some
cooking. If you choose to use oil or butter, we recommend using
refined olive oil, peanut oil, corn oil or clarified butter as these have a
high smoke point. Do not use extra virgin olive oil or oil sprays as they
cannot withstand high temperatures, and will leave a thin carbonised
layer on the no-stick coating.
The ceramic coating distributes heat more evenly and effectively. This
causes some protein-rich foods to cook more quickly. It is important
to use the right heat setting for your method of cooking. Always use
the lowest heat possible as this will allow your food to cook in its own
natural moisture. We recommend low to medium settings for most
cooking.

Page 5
Manual Version: v1.0
Model Code: 4812
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
3 Assembly
Instructions
-
4Before First Use
-
4 For Best Results
-
5 Back Cover
End