Oypla Kids 3927 User manual

Page 1
Model Code: 3927
Oypla.com LLP / www.oypla.com
User Manual
Model Code: 3927
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
5Back Cover
End
Children’s Easel

Page 2
Model Code: 3927
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
5Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
Before using the easel, make sure all
fastenings are tightly in place and that
everything is in order, and checked
periodically by an adult.
Children must be supervised at all times
when using the easel.
This product is only to be used for its
designated purpose.
This product contains small parts that
could be a choking hazard if swallowed.
Keep these items away from children.
Only use this product on stable, level and
dry ground.
This product is for domestic use only.
This product contains small parts that
can be accidentally swallowed –never
allow children to put any of the parts in
their mouths at any time.
Remove any packaging before giving toy
to child.
Please advise children to only use marker
pens on the whiteboard side, and chalk
only on the blackboard. Chalk and pens
should not be used on any other section
of the easel.
Do not carry out alterations or
modifications to this product.
Pens can stain if used on skin or clothing.
Leaving the easel outside exposed to
weather, especially direct sun, rain and
salt air, will speed with weathering
process. This can be slowed by removing
the chair from these conditions.
Keep away from fire.
This product is not suitable for children
under 3 years.
If the product is damaged or has any
defects, please contact
[email protected]
⚠Never under any circumstances allow
children to insert any of the parts or
accessories into their mouths.
⚠Always ensure children are supervised
whilst using the easel.
Warnings

Page 3
Model Code: 3927
Oypla.com LLP / www.oypla.com
Parts List:
-If you are missing any of the below parts, please contact [e-mail]
-Please be aware that you will be referring to this parts list throughout the assembly process.
Part
Quantity
Image
Leg (A)
2
Leg (B)
2
Bottom Tray
1
Blackboard/Whiteboard
1
Large Side Connectors
2
Small Side Connectors
2
Wood Screw
4
Plastic Bolt
10
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
5Back Cover
End
Assembly Instructions
1
Firstly, create the two side A-frames. This can be done by aligning the notch
in Leg (A) with the corresponding top corner of Leg (B) to create an A shape.
Use a Large Side Connector and two of the Plastic Bolts provided to secure
the two legs together, using the middle hole, like in the image below. Note:
ensure the bottom two holes have the larger side facing up, not down, as these need to be
this way later on when we assemble the Bottom Tray.
Note: You will also find a pack of chalk sticks, two erasers and a pen in the
package. These are not required in the assembly process.

Page 4
Model Code: 3927
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
5Back Cover
End
2
3
Then, attach the Blackboard/Whiteboard to the A-frames you created in
step 1. Do this using more Plastic Bolts. One Plastic Bolt should be inserted
into the hole at the top of the A-frame, ensuring it is all the way in so it
connects with the Blackboard/Whiteboard. At this point, attach the Small
Side Connector using more Plastic Bolts, like the below image.
Afterwards, simply attach the Bottom Tray to the A-frame sides using the
four Wood Screws provided.
Note: when cleaning the easel, only use a damp cloth. Using harsh
detergents or cleaning chemicals can damage the boards and frame.

Page 5
Model Code: 3927
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
5Back Cover
End
Imported by Oypla.com LLP, Uxbridge, UX8 2FX