OYPLA PETS 4047 User manual

Raised Pet Bed
User Manual
USER MANUAL Model No: 4047, 4048

Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.
•Make sure all fastenings are tightly in place and that everything is in order before
using the product. This should be checked periodically by an adult.
•This product is intended for indoor use only.
•Do not carry out alterations or modifications to this product.
•Not suitable for use by children.
•This product contains small parts that could be a choking hazard if swallowed. Keep
these items away from children.
•Clean only with a damp cloth. Do not use strong industrial cleaning substances.
•Leaving the product outside exposed to weather, especially direct sun and rain, will
speed the weathering process. This can be slowed by removing the product from
these conditions.
•Ensure that the size of the pet bed is suitable for the size of your pet.
•Do not discard any of the packaging until you have checked that you have all of the
parts and fittings required.
•Use the correct fixings as indicated. Do not tighten any of the nuts until the unit is
completely assembled, then finish by tightening all nuts. All nuts must be tightened
before use.
•If the product is damaged or has any defects, please contact cs[email protected]
USER MANUAL Model No: 4047, 4048

Operating Instructions
Parts List:
If you are missing any of the below parts please contact [email protected]
Please be aware that you will be referring to this parts list throughout the assembly process
Slide the male leg (B) and
the female leg (A) into the
longest edges of the mat (E)
and join together.
Slide the connecting poles
(C) into the shortest edges
of the mat.
Insert the bolts (D)
through the legs to hold
the connecting poles in
place.
Tighten the bolts using the
allen key (F).
Please retain a copy of all instructions for future
consultation.
USER MANUAL Model No: 4047, 4048