OYPLA SPORTS 3665 User manual
Page 1
Manual Version: v1.0
Model Code: 3665
Oypla.com LLP / www.oypla.com
User Manual
Model Code: 3665
Contents
1Front Cover
-
2Safety
Instructions
-
2Warnings
-
3Assembly
Instructions
-
4Back Cover
End
Universal 3-Bike
Carrier
Page 2
Manual Version: v1.0
Model Code: 3665
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
2Warnings
-
3Assembly
Instructions
-
4Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
•This product contains small parts that
could be a choking hazard if swallowed.
Keep these items away from children.
•Make sure all fastenings are tightly in
place and that everything is in order
before using the product. This should be
checked periodically by an adult.
•This product is not a toy, and is only to
be used for its designated purpose.
•Clean only with a damp cloth. Do not use
strong industrial cleaning substances or
abrasive materials as these will damage
the product.
•Leaving the product outside exposed to
weather, especially direct sun and rain
will speed the weathering process. This
can be slowed by removing the product
from these conditions, or covering it with
a suitable cover.
•Every time before use, check the carrier
for security of fittings or any sign of wear
and tear. Replace any worn or damaged
parts.
•DO NOT use the bicycle carrier if any
parts are missing or damaged as this may
cause failure and/or personal injury.
•If the load obscures the vehicle,
registration plate or lights, fit an auxiliary
number plate and/or lighting system.
•Avoid damage caused by hot exhaust
fumes. Do not position bicycles directly
next to the vehicles exhaust, especially
the bicycles tyres. If necessary, fit an
exhaust deflector.
•If this product is damaged or has any
defects, please contact
⚠Due to the variety in design of vehicles
and bicycles, it is the user’s full
responsibility to ensure no damage occurs
whilst using this bicycle carrier. Correct
attachment of carrier to a vehicle is
therefore critical and is beyond control of
the manufacturer, distributor or supplier.
⚠The user must secure the carrier and any
bicycles to be carried properly, checking the
security frequently when in use.
⚠The maximum weight capacity of this
bike rack is 40kg. Exceeding this weight may
cause product failure and damage to your
car or other road users.
⚠Remove any loose objects from the
bicycles i.e. pumps, bottles etc.
⚠Avoid any protrusions beyond the side of
the car as these may present a risk of injury
to passers-by.
⚠Drive carefully - Be aware of cross winds,
sudden braking or hard cornering, reduce
speed accordingly when using carrier.
⚠This carrier is designed for temporary use
only; remove when not in use or before
going through a car wash.
⚠Remember the driver of the vehicle is
responsible for the security and safety of the
load carried.
Warnings
Page 3
Manual Version: v1.0
Model Code: 3665
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
2Warnings
-
3Assembly
Instructions
-
4Back Cover
End
Assembly Instructions
1
2
3
4
Open the two suspension arms.
Place the safety ring (A) over your
vehicle’s tow bar, ensuring that the
two clamps (B) are positioned
around the tow ball.
Fully open the main arms to tighten
the clamps (B) around the tow ball
and to lock the handle (C).
Secure the handle by inserting
the safety pin (D) onto the hole
of the handle.
5
Place the ring (A) onto the hooks
(E) and tighten the knob (F) to lock
everything together.
Page 4
Manual Version: v1.0
Model Code: 3665
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
2Warnings
-
3Assembly
Instructions
-
4Back Cover
End
6
Attach the bicycle holders (G)
onto the suspension arms and
fix tightly using a screwdriver.
7
Place the bicycle on the carrier in
the bicycle holders. Attach the
bicycle to the holder using the
straps and adjust until the bicycle
is securely held.
