Oypla 4229 User manual

Fruit Cage
User Manual
USER MANUAL Model No: 4229

USER MANUAL Model No: 4229
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.
Make sure all fastenings are tightly in place and that everything is in order before
using the product. This should be checked periodically by an adult.
Unpacking, installing and fixing the parts are to be completed by an adult.
This product is intended for outdoor use only.
This product is not a toy, and is only to be used for its designated purpose.
Do not carry out alterations or modifications to this product.
This product is not suitable for children.
Clean only with a damp cloth. Do not use strong industrial cleaning substances.
Leaving the product outside exposed to weather, especially direct sun and rain, will
speed the weathering process. This can be slowed by removing the product from
these conditions.
Only use this product on stable and level ground.
Do not discard any of the packaging until you have checked that you have all of the
parts and fittings required.
Keep away from fire.
Do not lean or put a lot of pressure against the fruit cage as this may result in
personal injury and/or product failure.
This product is not suitable for use in high winds as this may result in personal injury
and/or product failure.
If the product is damaged or has any defects, please contact [e-mail]

[1] Corner Connector
8pcs
[2] Top Connector
2pcs
[3] Bottom Connector
2pcs
[A] Large Pole
5pcs
[B] Medium Pole
8pcs
[C] Small Pole
12pcs
[D] Small Netting
1pcs
[E] Large Netting
1pcs
[F] Cable Ties
40pcs
[G] Fabric Tape
1pcs
[H] Ground Stakes
10pcs
USER MANUAL Model No: 4229
Assembly Instructions
Parts List:
Please check you have all parts below before attempting to assemble this product.
If you are missing any of the below parts, please contact Oypla customer services:
[e-mail]
Please be aware you will be referring to this parts list throughout the assembly process.

1. Put the frame together using the small, medium and large poles along with the corner
connectors, top connectors and bottoms connectors.
2. Place the small netting over the top of the frame and secure by using a few cable ties.
3. Attach one end of the large netting to one of the upright poles using the cable ties.
Wrap the rest of the netting around the frame and secure using the cable ties on each
upright pole. Ensure that you leave one loose for entry.
4. Secure the last section of the netting to the upright pole using the fabric tape to create
an opening for access.
5. Secure the netting down using any left-over cable ties if required.
6. Secure the fruit cage into the ground using the ground stakes.
USER MANUAL Model No: 4229
Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX