Oypla DIY 3979 User manual

User Manual
USER MANUAL Model No: 3979
500kg Motorcycle Lift

Do not discard any of your packaging until you have checked that you have all
parts and fittings required.
Make sure all fastenings are tightly in place and that everything is in order before
using the product. This should be checked periodically by an adult.
Use the correct fixings as indicated. Do not tighten any of the nuts until the
products is completely assembled. Then finish by tightening all the nuts. All nuts
must be tightened before use.
This product is not a toy, and is only to be used for its designated purpose.
Never carry out any alterations or modifications to this product.
This product is intended for use only.
Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials as these will damage the product.
Only use this product on stable, level and dry ground.
DO NOT exceed the maximum weight limit of 500kg.
Do not place any objects in the gap created by the motorcycle lift as this can
create a chance of injury and/or damage to the product.
If the product is damaged or has any defects, please contact [email protected]
USER MANUAL Model No: 3979
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.

USER MANUAL Model No: 3979
Assembly Instructions
Parts List:
If you are missing any of the below parts please contact [email protected]om
Please be aware that you will be referring to this parts list throughout the assembly
process.
1. Using the handle,
turn the lifting
screw clockwise to
raise the
platform.(Please
see image to left)
This Product Should Contain:

USER MANUAL Model No: 3979
2. Once at a suitable height, slide the saddles
onto the platform. (Please see image to right)
3. Once in place, securely
fasten the screws so that
they hold the saddle in
place. (Please see image to
left)
Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX