Oypla 3403 User manual
User Manual
USER MANUAL Model No: 3403
Car Polisher
WARNING
To Reduce The Risk of Fire or Electric Shock,
follow these basic precautions:
Read all instructions before using this tool.
Never allow children to operate or play with this tool.
Never clean this tool with flammable fluids. The fumes can create a fire hazard or explosion.
UNPLUG OR DISCONNECT THIS TOOL FROM THE POWER SUPPLY BEFORE SERVICING.
-Save these instructions-
•The product should only be connected to a 230 V AC, 50 Hz electrical outlet.
•Never leave the product unattended whilst it is switched on.
•If you have to leave the product unattended, even for a short while, always switch
it off.
•Keep the product out of children’s reach and do not allow children to use it.
•Never use near flammable materials or gasses.
•Inspect the mains lead regularly. Never use the product if the mains lead or plug
has been damaged in any way.
•Do not place the mains lead on or near any hot surface.
•Do not touch the product if your hands are moist or wet.
•Always wear eye protection.
•Never attempt to use this polisher as a grinder or sander.
•If the product is damaged or has any defects, please contact [email protected]
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 3403
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling and
reduced ability to grip. Long term exposure can lead to a chronic condition. If necessary, limit the
length of time exposed to vibration and use anti-vibration gloves. Do not operate the tool with hands
below a normal comfortable temperature, as vibration will have a greater effect. Use the figures
provided in the specification relating to vibration to calculate the duration and frequency of operating
the tool.
Sound and vibration levels in the specification are determined according to EN60745 or similar
international standards. The figures represent normal use for the tool in normal working conditions. A
poorly maintained, incorrectly assembled, or misused tool, may produce increased levels of noise and
vibration. www.osha.europa.eu provides information on sound and vibration levels in the workplace
that may be useful to domestic users who use tools for long periods of time.
USER MANUAL Model No: 3403
A
B
C
A–On/off button
B–Handle
C–Polishing Disc
Operating Instructions
If you are missing any of the below parts please contact
Please be aware that you will be referring to this parts list throughout the assembly
process.
Applications
•The polisher is suitable for light to medium duty polishing tasks on vehicles of all kinds and other
similar surfaces.
•When the entire surface is coated, stop the machine and allow the compound or past to dry (follow
manufacturer’s guidance).
•Attach the softer polishing pad to the machine and work across the surface as before until all the
polishing compound or paste is removed.
Operating Instructions
Warning: Ensure the polisher is disconnected from the power supply before fitting or changing polishing
pads.
Grip the polisher by both hands and ensure that it is help with a firm grasp. Slide the on/off switch to the on
position.
USER MANUAL Model No:
USER MANUAL Model No: 3403
Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
Polishing
•Always ensure that the area to be polished is clean and dry.
•Read and understand all information supplied with your polishing compound or paste before
use.
•Apply polishing compound onto the rougher polishing pad, and place the pad against the work
surface.
•Hold the machine securely, using both hands, by the handles provided. The polishing bonnet
should lightly contact the work surface.
•Start the machine and work across the surface using a wide, sweeping motion. Apply extra
compound of paste as required.
Care and Maintenance
•Remove the polishing pads after each cleaning to allow the polishing disc to be dried.
•Use mild soap and a damp sponge to clean the polisher.
•Do not submerge any parts of the polisher in water.
•Regularly clean the ventilation slots.
•If the machine is not used for a long period, remove the polishing pads from the disc. Store the
machine with the polishing disc facing downwards.
•The polishing pads can be used more than once. The pads are machine washable but should not
be dried using a tumble-dryer.
•Always use clean and dry pads before polishing.
Environmental Protection
Products bearing the symbol shown above means that used electrical and electronic equipment (WEEE) should not be mixed
with general household waste. For proper treatment, recovery and recycling, please take this product(s) to designated
collection points where it will be accepted free of charge. Disposing of this product correctly will help save valuable
resources and prevent any potential negative effects on human health and the environment, which could otherwise arise
from inappropriate waste handling. Please contact your local authority for further details of your nearest designated
collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.
Rated Voltage: 230V AC, 50Hz
Power: 120W
No Load Speed: 3500rpm
Pad Diameter: 240mm
Ingress Protection: IP20
Protection Class: II/
Sound Pressure LPA: 58dB(A)
Sound Power LWA: 69dB(A)
Uncertainty K: 3dB(A)
Weighted Vibration ah:
14.8m/s2
Uncertainty K: 1.5m/s2
Table of contents
