Cordless Random Orbital Sander
5
accessories, or storing power tools. Such
preventive safety measures reduce the
risk of starting the power tool accidentally .
► Store idle power tools out of the reach of
children and do not allow persons unfamil-
iar with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
► Maintain power tools. Check for misalign-
ment or binding of moving parts, breakage
of parts and any other condition that may
affect the power tool’s operation. If dam-
aged, have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
► Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp
cutting edges are less likely to bind and
are easier to control.
► Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working con-
ditions and the work to be performed. Use
of the power tool for operations different
from those intended could result in a haz-
ardous situation.
► Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slip-
pery handles and grasping surfaces do not
allow for safe handling and control of the
tool in unexpected situations.
Service
► Have your power tool serviced by a qual-
ifi ed repair person using only identical re-
placement parts. This will ensure that the
safety of the power tool is maintained.
SAFETY INFORMATION
►IMPORTANT: To reduce risk of injury,
please read this user guide before assem-
bly.
Battey tool use and care
► Recharge only with the charger specified
by themanufacture.A chage that is suitable
for one type of battery pack may create a
risk of fi re when used with another battery
pack.
► Use power tools only with specifi cally des-
ignated battery packs. Use of any other
battery packs may ceate a risk of injury
and fi re.
► When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails,screws or other
small metal objects, that can make a
connection from one terminal to anothe.
Shorting the battery terminals together
may cause burns or a fi re.
► Under abusive conditions, liquid may be
ejected fom the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes,additionally
seek medical help. Liquid ejected from the
battery may cause iritation or buns.
Safety warnings random orbital
sander
► Contact o inhalation of dust generated
when working with the sander may be
harmful or toxic and can endanger the
health of the operator and bystanders.
► Never use the sander on asbestos, paint-
ed surfaces that contain lead, or woods
and metals which when sanded can create
harmful or toxic dust. Risk of poisoning
and dust- related hazards.
► Always wear personal protective equip-
ment when using the sander, or if you are
in the vicinity of someone using the sand-
er. Protective equipment such as safety
glasses, eye shields, or goggles, and a
dust mask will reduce personal injuries.
Nb. Everyday eyeglasses have only im-
pact-resistant lenes; they are not safety
glasses.
► Do not allow people to enter the woking
area without wearing a dust mask.
► Use clamps or another practical way to se-
cure and support the workpiece to a stable
platform. Holding the work by you hand
or against the body leaves it unstable and
may lead to loss of control.
► Your sander is a handheld tool, do not
clamp in a fi xed position.
► Where possible, seal off the working area
to contain the dust for later removal.
► If operating the sander in a workshop en-
sure that a suitable dust extraction system
is available and functioning correctly to
reduce the exposure to wood dust to as
low as is’reasonably practicable’. Dust
extaction systems will reduce dust- related
hazards.
► Your tool is designed for dry sanding only,
not wetsanding. Failure to follow this rule
may result inelectical shock.
► Do not sand magnesium material due to
the risk of fi re.
► Only use sanding paper in good condition.
Do not use torn or worn sanding paper.
► Before sanding, check the area is free of
nails, screws,etc.
