P3 International Kill A Watt User manual

Using the Kill A Watt™Meter
The LCD shows all meter readings: voltage (Volt),
current (Amp), watts (Watt), kilowatt-hours (KWH),
frequency (Hz), power factor (PF), and volt amps
(VA).
Getting Started
Plug the meter into the wall and plug the appliance into the meter.
Once the meter is plugged in, it will start to accumulate KWH and
record the powered duration time (hour). The pink button is a
toggle function key. When pressed, it will alternate between KWH
used since being plugged in and the number of Hours the meter has
been plugged in.
Step 3 - Calculate the Results
Step 2 - Capture the Data
Step 1 - Plug it In
Before unplugging, record the KWH and Hours from the meter. The
meter resets to zero when unplugged, so it is important to record
before unplugging. Display the KWH and Hours of duration by
using the pink KWH/Hours button.
The time (duration) will initially be displayed as Hours:Minutes
(example: 02:30 for 2 hours and 30 minutes).
Identify the kilowatt-hours (KWH) used for a single hour.
Example: The meter was plugged in for 02:00 hours and used .20 KWH in that time. To
determine the use for a single hour, divide .20 by 2 hours. .20 2 = .10
Identify your power rate by looking on your power bill.
Multiply the KWH used in 1 hour by the Cost per hour of use to get the Cost Per Hour.
Example: .10 x 8¢= .008
Multiply the Cost Per Hour by the number of hours the appliance is used per month to get the esti-
mated cost per month.
Example: .008 x 720 hours = $5.76
The appliance used in the example would use approximately $69.12 per year in electrical costs.

Using the Kill A Watt™ Meter - Small Appliances
Small appliances will use less power than a large
appliance. To measure an appliance that is not
plugged in for long periods of time, use Watts
instead of KWH.
Getting Started
Plug the meter into the wall and plug the appliance
into the meter.
Step 4 - Calculate the Results
Step 2 - Capture the Data
Step 1 - Plug it In
Press the Watts button. It is the center button on the meter.
This displays the Watts as the active power.
Example: The hair dryer uses 1400 watts on “high.”
Figure the number of watts used in a month:
Example: 1400 watts x 5 hours = 7000 watt-hrs.
Convert to kilowatt hours (KWH) by dividing by 1000.
Example: 7000 1000 = 7 KWH
Multiply by the rate charged by the utility (found on the bill.
Example: 7 KWH x 8¢per KWH = 56¢monthly
The appliance used in the example would use approximately $6.72 per year in electric costs.
Step 3 - Estimate Hours Used
Estimate how many hours you use the appliance in a month.
Example: The hair dryer is used 10 minutes each day, about 30
days per month. (10 x 30 = 300 minutes per month, or 5 hours).