PACIFIC PLAY TENTS AMERICANA User manual

Age 2 and Up
#60200
PACIFIC PLAY TENTS, INC. | Los Angeles, CA 90023
CUSTOMER SERVICE: Toll Free (877) 722 - 0083
pacificplaytents.com | Rev. 0917
WARNING:
KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC
This tent meets the flammability requirements of CPAI-84. The fabric may burn if
left in continuous contact with any flame source. The application of any foreign
substance to the tent fabric may render the flame-resistant properties ineffective
This tent meets the ASTM F963 toy safety standards.
A
B
PARTS PART NAME
Slat Legs
Wooden Screw
Support Rods
Tent Cover
QTY (PCS)
4
6
3
1
ITEM
C
D
1
4
A - FRAME TENT INSTRUCTIONS
AMERICANA
Screw the Wooden Screw into the
leg and leg pole, until the ends are
flush against each other.
Repeat Step 5 on the other side
(Do not overtighten)
STEP 5
NOTES
pacificplaytents.com
@pacplaytents
facebook.com/pacificplaytents
Visit us online!

WARNING: ADULT ASSEMBLY REQUIRED.
PLEASE READ ALL OF THE DIRECTIONS PRIOR TO SET UP.
DO NOT APPLY EXCESSIVE FORCE TO
THE POLES DURING ASSEMBLY.
Some additional tips...
• The tent should be assembled by an adult. Do not allow children to
jump on the tent.
• Set up on a soft or smooth, flat surface only. Avoid sharp objects while
playing with the tent.
• Do not use tent near any open flame or fireplace.
• The tent may be set up outdoors, but is not waterproof or
weatherproof. It should not be exposed to moisture and should be
stored indoors overnight.
Thank you for purchasing this tent from our great line of products. We at
Pacific Play Tents® are confident that it will provide you and your children
with endless hours of creative fun and enjoyment year-round. We
encourage you to read and understand each step of the set-up process
prior to assembly. Set-up is easy and fun!
3
2
Insert Slat Legs into leg sleeves.
Then lock the grooves into place.
STEP 1
Insert Support Rods into roof sleeve.
Screw the Wooden Screw into
cross bars and roof pole, until the
ends are flush against each other.
(Do not overtighten)
STEP 2
Repeat step 2 on the back side.
(Do not overtighten)
STEP 3
Insert Support Rods into floor
sleeves.
(Continued on back)
STEP 4