Pago Shape 60 User manual

Neo Plus
Shape 30 & 60
Matrix
Matrix plus
1 of 2
STEP 1
Insert castors
into base.
STEP 2
Insert gas
cylinder into
base. STEP 3
Place telescopic
cover over
gas cylinder.
BASE
ASSEMBLY
COMPLETE
BASE ASSEMBLY

STEP 4
Pull back the bellow and allow the back
stem to protrude.
BACK ASSEMBLY
STEP 6
Pull bellow over mechanism and stem.
Ensure that the hole is over the stem.
STEP 7
Push stem through the hole to the
desired height. Tighten with knob
BACK ASSEMBLY COMPLETE
STEP 5
Insert back assembly into mechanism.
Do not push stem too far through.
2 of 2
STEP 8
Insert the top of the
base into underside
of the seat.
The levers adjust
seat height and
back angle.