PaiPaitek PD 258-V User manual

Model Number: PD 258-V
User Manual
Vibration
Anti-Bark Collar

Main Features:
1) PD258-V is a very safe product.
2) It has cycle charging, energy-saving functions.
3) It won't be disturbed by any other noisy.
4) It's suitable for the most popular dog breeds.
Turn On/Off:
Start it by just pressing the switch, and shut it down by pressing
one second.
Sensitivity Adjusting:
1)You can adjust the correct sensitivity according to the loudness
of dogs' barking.
2)It's easy to adjust the sensitivity with 5 levels, the initial
setting is level 3. Press “+/- ”to adjust the sensitivity with a
“bleep” , the higher sensitivity, the easier to activate the collar to
work.

Vibration Test:
The anti-bark collar will start vibration if you blow directly to the
sense hole in the middle or imitate barking loudly.
Sense hole
Training Instructions:
1)As soon as the dog barks, anti-bark collar will start vibration to
warn the dog to stop.
2)If the dog continues to bark, the collar will continuously
vibrate for longer time after each bark till the dog stop barking.
3)After training, the dog will learn the vibration is caused by the
bark.
4)It does need certain period of time to see the good result of this
anti-bark collar.
Automatic Intelligence Mode:
1)After the dog stops barking for 30 seconds, anti-bark collar
will reset to initial standby model, no matter how many times it
works.

Charging Information:
1)The product is with cycle charging function, the red light will
twinkle when charging, and stay red without twinkle when
charging full.
2)When batt ery is too low, t he c ollar wil l shut down
automatically, please charge in time.
Collar:
1)Please cut it if the stripe is too long.
2)Please don't tie the leash to the stripe.
3)Please put the collar below the dog neck with a finger space, if
too loose, the vibration effect will be severely reduced.
Attention:
Please use USB charger with follow parameters (The product is
also compatible with mobile chargers or computer USB interface,
please double check the parameters before charging)
Input: 100-240V~50/60HZ
Output: 5V 1000mA(or 300mA/500mA)
2)After the collar works for 7 times, the signal lamp will twinkle
fast, and then the collar will stop working for 30 seconds before
resetting to initial standby model.
The vibration technology is not only humane, but also very safe
and effective.

Reminders:
1)Please keep the product away from water.
2)Very few dogs will still bark at the beginning of wearing the
collar, and according to our years' experience, this behavior is
normal and it only needs some time of training.
3)Usually the dog will reduce barking evidently after the first
few days of wearing the collar, but the training isn't finished, and
smart dogs will still attempt to bark. So we need to continue the
training to keep the good result.
4)Although the anti-bark collar is designed with the latest
technology of differentiating the dog's barking from other
environmental noises, it might be seldom activated by dog's
excessive scratching or outer fierce crash. Then the pet might be
suffering from fleas or ear mites, please consult a local vet
immediately.
5)If any other questions, you are welcome to contact us or our
distributors.
Safety Notes:
1)Please avoid the dog biting of the collar, which is made by
indigestible plastic and electronic components. If dog swallows
any parts accidentally , please consult the local vet immediately.
2)The product is for dogs only, please put it away from kids.

④
②
③
①
Please install nylon collar in accordance with
the illustrated figure.
Too long Receiver Collar can be
trimmed, or be handled with other
methods.