PAJ EASY FINDER User manual

EASY
FINDER
4G

3
EASY Finder 4G by PAJ V 2.1 EN
© PAJ UG (haftungsbeschränkt)
Thank you for purchasing our FINDER!
Before starting:
Read the instructions carefully, before using the FINDER for the rst time. Please
keep this user manual in a safe place in case you may need it in the future .
1.1 Scope of delivery
Your delivery will include:
• The PAJ EASY Finder 4G
• A charging cable
• An USB wall plug adapter
• A protective bag
• A M2M SIM card*
*the M2M SIM card is already inside your
FINDER and is not replaceable.
NOTE!
We update our user manuals on a regular basis, in order to keep them up to date.
The latest version can be viewed at any time at:
paj-gps.com/finder
1.1 Scope of delivery............................................................................. 3
1.2 Product description ......................................................................... 4
1.3 Instructions for charging.................................................................. 5
1.4 Activation ....................................................................................... 7
1.5 Start-up .......................................................................................... 8
1.6 Handling of the SOS button............................................................... 9
1.7 Use................................................................................................10
1.8 Standby mode and location update...................................................11
1.9 Short description FINDER-Portal ......................................................12
1.10 Meaning of the LED lights..............................................................14
1.11 Alerts ..........................................................................................16
1.12 Technical data ..............................................................................17
1.13 Safety Instructions........................................................................18
1.14 Disposal of used batteries.............................................................24
1.15 Disposal of electric devices...........................................................25
Tableof contents

45
1.2 Product description
NOTE!
To activate, you need the device ID. Please have it ready or write
it down.
1.3 Instructions for charging
You should fully charge the FINDER before using it for the first time. Please
proceed as follows.
Connect the supplied charging
cable with the magnet to the
contacts of the FINDER.
1.
Connect the other end of the
charging cable to the USB
port of the enclosed wall plug
adapter.
(If no wall plug adapter is included, you
can use any USB wall plug).
2.
LED signals
• GPS LED
• POWER LED
• GSM LED
On/off button
SOS button
Charging ports

67
NOTE!
In rare cases, the LEDs do not indicate that the FINDER is fully charged when char-
ging for the first time. If the LED lights still do not indicate the end of charging after
10 hours of charging, please disconnect the FINDER from the power supply and
start using it. Then simply check the battery level in the FINDER-Portal.
Wait for the end of the char-
ging process. The unit is fully
charged when the red LED
goes out, see „1.10 Meaning of
the LED lights“ of this manual.
4.
1.4 Activation
In order to use your EASY Finder 4G, you will need to previously activate it
online. Enter the following link and follow the instructions:
start.nder-portal.com
Plug the USB wall plug adapter
into a power socket.
3.
With an active tracking time of approx. 1 hour per day, the EASY Finder 4G offers a
battery life of approx. 10 days without charging in between! However, it should be
noted that the runtime depends on the utilisation. The more the device is moved
and the more alarms are sent, the higher the utilisation.

89
1.5 Start-up
If the activation is successfully carried out, the FINDER is ready to be switched on.
The on/off button is is located at the top right of the FINDER.
Switch on:
Press the button briefly once to the turn the device on. The LEDs flash for 5
seconds. For information regarding the LED lights, see section „1.10 Meaning of
the LED lights“.
Switch off:
Press the button 5 times within 5 seconds. The FINDER then switches off.
NOTE!
We recommend that after you start your device for the first time you move it in
an open space (for example during a walk or a short car ride). This can speed
up the connection process, meaning that your device will connect to the best
available network more quickly. A good network connection is required in order
for the device to send and log data in the FINDER Portal.
1.6 Handling of the SOS button
Hold the button down for 5 seconds in a row and the FINDER will send the
alarm. You can see whether an alarm has been sent by the LEDs flashing alter-
nately for 12 seconds.
5 sec.

10 11
1.7 Use
A s s o o n a s y o u r d e v i c e h a s b e e n s u c c e s s f u l l y a c t i v a t e d , s t a r t e d u p a n d h as s e n t
a n d l o g g e d d a t a f o r t h e f i r s t t i m e , y o u c a n p la c e i t w h e r e v e r y o u c h o o s e an d u s e
y o u r p h o n e , t a b l e t o r P C t o s t a r t t r a c k i n g i t ! Yo u w i l l b e a b l e t o d o t h i s i n o u r A p p o r
enter the following link to the desktop version:
v2.nder-portal.com
1.8 Standby mode and location update
By default, our devices send their position to the FINDER portal every 30 seconds, so
you can always see the current location there.
What is the standby mode?
As soon as the FINDER is no longer moved, standby mode is activated after a few
minutes to save power. This suspends the update of the location for the duration
of the standstill of the unit. In the FINDER portal, the standby mode is displayed
as follows:
Nevertheless, the unit naturally remains on standby and still sends alarm mes-
sages. As long as the FINDER is in standby mode, only the data (time, battery
status, etc.) of the last position before standby mode is displayed on the portal,
as the position does not change during standby.
Online mode
At the latest, when the FINDER is moved again, the device automatically switches
to active and sends its position to the portal again every 30 seconds.
Location update in standby mode
If the FINDER is in standby mode for a longer period of time, the unit will still send
a new position to the portal at least every 24 - 26 hours.

12 13
1.9 Short description FINDER-Portal
1.
2.
3.
4.
5.
Update interval
Device position
Distance travelled
Menu Alerts Devices Options
30
sec
1. 2. 3. 4. 5.
Application menu
View statistics,
device settings,
application settings,
alert summary,
extra features e.g.
logbook etc.
Alert notications
View unread notications
PAJ Logo
Update page/refresh
Device list
Overview devices,
alert settings,
travelled routes,
customize device display
Options
Map view options
Detailed instructions for the FINDER-Portal
can be found on: paj-gps.de/portal-anleitung
or scan this QR-Code.

14 15
1.10 Meaning of the LED lights
*NOTE!
The FINDER will only be in standby mode
if all three LED lights are off.
Orange LED - Network
Signal Meaning
The orange LED is on Signal available
The orange LED flashes No signal available
The orange LED is off The GPS tracker is in standby mode*
or switched off
Red LED - Battery status
Signal Meaning
The red LED is on Battery is charging
(charging cable connected)
The red LED is off Battery fully charged
(charging cable connected)
Blue LED - GPS status
Signal Meaning
The blue LED is on GPS signal available
The blue LED flashes No GPS signal available
The blue LED is off The GPS tracker is in standby mode*
or switched off
The LEDs flash alternately for
12 seconds
The SOS button has been pressed and
an SOS signal has been sent.
The LEDs flash ve times in
succession
The power-off button was pressed
ve times within ve seconds and a
power-off alarm was sent.

16 17
1.11 Alerts
Weight 100 g
Dimensions 78 x 39 x 29 mm
Battery time in operation*: approx. 10 days /
in continuous operation: approx. 2-3 days
Battery type 3,7 V / 3.000 mAh Li-ion
Charger 110-220 V, AC 50 Hz input
5 V/1A, DC output
Time to start cold start: 3-5 min / standby: 1-3 min /
in operation: 1-10 s
Network/Bands
LTE-FDD:
B1/B2/B3/B4/B5/B7/B8/B12/B13/ B18/B19/B20/B25/
B26/B28/B66
LTE-TDD:
B34/B38/B39/B40/B41
GSM/GPRS/EDGE:
850/900/1800/1900 MHz
Network module SIMCOM A7670G
GPS chip AT6558R
GPS accuracy up to 5 meters
GPS reception -162 dBm
Storage temperature from -30°C up to +80°C
Operating environment from -20°C up to +75°C
Humidity 10% up to 85%
Water protection waterproof according to IP65
1.12 Technical data
*in motion about one hour a day.
Movement/Shock alert
Receive a notication as soon as your GPS tracker is either
moved or shaken.
Geofence alert
Receive a notication as soon as your GPS tracker leaves
your determined perimeter.
Speed alert
Receive a notication as soon as your GPS tracker exceeds
a certain speed (you can set the speed limit in the FINDER
Portal).
Battery alert
Receive a notication when your tracker‘s battery level is
low.
SOS alert
Receive a notication as soon as the SOS button is pressed.
Power-off alert
Notication as soon as the GPS tracker is switched off.
NOTE!
A l l a l e r t s m us t b e a c t i v a te d a n d d e ac t i v a t e d
via the FINDER-Portal. Once the alert is
active you will receive a notification via the
PAJ App and/or via email.

18 19
1.13 Safety Instructions
Signal words
The following signal words are used in these operating instructions:
NOTE!
This is a warning about possible damage to property.
WARNING!
This classies a hazard of medium risk level. Failure to comply with the warning
may result in serious injury.
Proper use
Please read the safety instructions for this PAJ FINDER, hereinafter only referred
to as GPS tracker, carefully before use in order to be able to deploy it properly.
The intended use is to employ the GPS tracker only as described in this manual to
locate an object or a living being. Please bear in mind that it is a criminal offence
to monitor third parties using a GPS tracker without their consent. If you use it in
any other way, this is considered improper use and can lead to damage to property
or even personal injury. Please note that the GPS tracker is not a toy for children.
In other countries and regions there are different laws on digital positioning and
localization of people, animals and/or objects. PAJ UG is not responsible if such
laws or regulations are violated, this is the sole responsibility of the user.
NOTE!
The manufacturer and dealer accept no liability for damage caused by improper
or incorrect use.
A faulty electrical installation or a mains voltage that is too high can lead to
an electric shock.
• Before use, make sure that the mains voltage of the socket corresponds
with the information on the type plate.
• To be able to disconnect the charging cable from the mains as quickly as
possible in the event of a failure, connect the power supply unit where it is
easily accessible.
• If you notice any visible damage to your GPS tracker or charging cable, do
not use it.
• Use only the original parts supplied to charge the GPS tracker. If the char-
ging cable is damaged, replace it only with original accessories from the
manufacturer.
• Never place the GPS tracker near an open re or hot surfaces.
• The GPS tracker is not protected against humidity and water. Please use
and store it only in a dry environment.
• The charging cable should only be used indoors. Keep it away from humidity
and do not kink it.
• Do not open the housing of the GPS tracker. Leave the repair to qualied
specialists. However, if you carry out repairs yourself, connect the GPS tracker
incorrectly or operate it incorrectly, liability and warranty claims are excluded.
Safety
WARNING! RISK OF ELECTRIC SHOCK!
Hazards for children and vulnerable people
WARNING! DANGER OF SUFFOCATION!
Please do not let people (including children) with limited physical, sensory or
mental abilities use the GPS tracker. It is considered an exception if they have
previously received instructions from a person responsible for their safety on
how to use the device.

20 21
NOTE!
Inform your child about the dangers and use of the GPS tracker.
Please make sure that your child does not handle small parts (e.g. accesso-
ries, etc.). These can be swallowed and lead to suffocation.
Below you will nd information and instructions on how to use the battery:
• The GPS tracker runs by a lithium ions battery. It is not exchangeable and
must not be removed or opened.
• Make sure that the GPS tracker (also when charging the battery) is kept away
from heat sources and high temperatures, such as direct sunlight in a vehicle.
Disregard of this instruction may result in destruction of the battery and
overheating, explosion and re.
• Only use the original accessories for the charging process. If the battery is
charged otherwise, this may result in overheating, explosion or re.
• Do not burn or pierce the GPS tracker. Protect it from mechanical damage.
• If a child swallows the battery, seek medical aid immediately!
Removing or replacing the battery:
• Contact our support if the battery needs to be removed or replaced.
• Send the machine to us to remove or replace the battery.
WARNING! EXPLOSION AND FIRE HAZARD!
The battery
• For safety reasons, do not attempt to remove the battery. Failure to remove
the battery properly may result in damage to the battery and unit, personal
injury and/or compromise the safety of the unit.
• PAJ GPS shall not be liable for any damage or loss (whether in contract or tort,
including negligence) arising from your failure to comply with these warnings
and instructions.
Batteries that leak due to damage can cause burns if they come into contact with
the skin. Therefore, never open the battery. However, if the battery leaks, please
wear protective gloves.
WARNING! RISK OF CHEMICAL BURNS!
NOTE!
Failure to observe these recommendations may result in malfunctions or
damage to the GPS tracker.
Electromagnetic compatibility
Please observe all rules and prohibitions and switch off the GPS tracker immedia-
tely in danger areas and if it might cause interference. Furthermore, it should not
be used in the vicinity of, for example, medical equipment, fuels and chemicals, or
in blasting areas. With mobile devices, malfunction due to interference may occur
and affect performance. Transformers and very strong magnetic elds must be
avoided. Otherwise there may be deviations in the transmission.

22 23
Below you will nd information and instructions on how to clean the GPS tracker:
• Do not use aggressive cleaning agents or brushes for cleaning. Do not clean
the GPS tracker with metallic cleaning objects (e.g. knife, metal sponge).
This may damage the surface.
• Never put the GPS tracker in water, in a dishwasher (or the like) and do not
use a steam cleaner.
WARNING! RISK OF DAMAGE!
Cleaning
Storage
If you are not using the GPS tracker for a lengthy period of time, turn it off. Place
the tracker in its original packaging or in a carton of the same size. Protect the
tracker from dirt and humidity.
NOTE!
Keep the FINDER away of children’s reach in order to avoid possible damage
to property or personal injury.
Correct cleaning:
• The surface may be wiped clean with a slightly damped cloth.
• The GPS tracker should then be wiped dry completely.
Declaration of conformity
Hereby, PAJ UG (haftungsbeschränkt) declares that the tracker, EASY Finder 4G, is in
conformity with the Directive 2014/53/EU. The complete text of the EU Declaration
of Conformity can be found at the following Internet address:
paj-gps.de/konformitaetserklaerung/
Packaging disposal
Dispose of the packaging according to type. Throw cardboard and paper to the
corresponding container. Foil belongs in the recyclables collection.

24 25
The following note is addressed to those who use batteries or products with
products with built-in batteries and who will not resell them in the form in which
they were supplied to them (end users).
Free recall of used batteries
Batteries must not be disposed of with waste. You are legally obliged to return used
batteries so that proper disposal can be guaranteed. You can return used batteries
to a local collection point or to your local retailer. As a distributor of batteries, we
are also to take back used batteries, although our obligation to take back used is
limited to the type which we carry or have carried as batteries in our range. Used
batteries of the aforementioned type can therefore either be returned to us with
sufcient postage or handed in directly to our dispatch warehouse at the following
address free of charge:
PAJ UG (haftungsbeschränkt)
Hohe Straße 61
51570 Windeck
Germany
E-Mail: [email protected]
Meaning of the battery symbols
Batteries are marked with the symbol of a crossed-out dustbin (see illustration).
This symbol indicates that batteries must not be disposed of in household waste.
Batteries containing more than 0.0005% mercury by mass, more than 0.002%
cadmium by mass or more than 0.004% lead by mass are also marked with the
chemical name of the pollutant below the dustbin symbol. The
abbreviation „Cd“ stands for cadmium, „Pb“ for lead and „Hg“ for
mercury.
1.14 Disposal of used batteries 1.15 Disposal of electric devices
The Electrical and Electronic Equipment Act (ElektroG) contains a large number of
requirements for the handling of electrical and electronic equipment. The most im-
portant ones are summarised here:
1. Separate collection of WEEE
Waste Electrical and Electronic Equipment that has become waste is referred to as
WEEE. Owners of WEEE must dispose of it separately from unsorted local waste.
In particular, WEEE does not belong in household waste, but in special collection
and return systems.
2. Batteries and accumulators
As a rule, owners of WEEE must separate spent batteries and accumulators that
are not enclosed in the WEEE before handing them over at a collection point.
This does not apply if the WEEE is handed over to public waste management
authorities and separated from other WEEE there for the purpose of preparation
for reuse.
3. Options for returning old appliances (WEEE)
Owners of WEEE from private households can hand it in to public waste management
authorities or at the collection points set up by manufacturers or distributors as de-
ned by the ElektroG. An online directory of collection and collection points can be
found here:
https://www.ear-system.de/ear-verzeichnis/sammel-und-ruecknahmestellen.jsf
4. Data protection
Old equipment often contains sensitive personal data. This applies in particular to in-
formation and telecommunication technology devices such as computers and smart-
phones. For your own sake, please note that each end-user is responsible for deleting
the data on the old equipment to be disposed of.
5. Meaning of the „crossed-out dustbin“ symbol
The symbol of a crossed-out dustbin regularly displayed on electrical and
electronic equipment indicates that the respective device must be separated
from unsorted local waste at the end of its service life.
6. Manufacturer registration number
As a manufacturer, within the meaning of the ElektroG, we are registered with the
responsible foundation Elektro-Altgeräte Register (Benno-Strauß-Str. 1, 90763 Fürth)
under the following registration number: DE33887550

26
PAJ UG (haftungsbeschränkt)
Hohe Straße 61, 51570 Windeck
Germany
In this case, please contact us
and we will be delighted to help you!
PAJ UG (haftungsbeschränkt)
Hohe Straße 61
51570 Windeck
Germany
Mail: suppor[email protected]
Phone: [phone]
Web: paj-gps.com
The PAJ GPS Team wishes you to enjoy your
EASY Finder 4G!
DO YOU HAVE ANY QUESTIONS?