Pakketo PWF-0155 User manual

Item Features
Frame
071-000322
110.2"82.7"
29.5"
27.5"
16.5"
31.5"
2.7"
Assembly Manual
Health & Safety Manufactured from human health and environment friendly materials.
Proper Usage
Do not expose the item to sunlight directly. Direct sunlight
may cause fading of the color.
Please protect upholstery fabric from sharp objects, glue,
hot objects, fire and chemical materials.
For a better look of your cushions, you can turn them
upside down once a week.
Cleanng
Firstly, clean your furniture with vacuum cleaner.
Please put some pure soap in a bucket of warm water.
Make sure that the soap is fully dissolved in the warm water
Before cleaning your furniture, try a test clean in a small
area on the back of the seat cushion first.
Please wait until cushions and pillows are fully dried.
pure
soap
The product's main interior frame that carries/holds weight and pressure is constructed from hardwood
timber while other sections that is not exposed to direct pressure are made from particle board. 100%
solid timber ıs used to support the main carrier sections where legs are installed.
Legs Legs are made of high carrier capacity hard plastic.
Cushions The sofa seat cushions are filled with 4.7'' (12 cm) thick 32 density soft gray foam.
Pillows Pillows are filled with a particle foam.
Fabric Easy to clean, woven polyester and cotton blend fabric is used for upholstery.
Assembly
The legs and back parts of the product are shipped disassembled. You should place the back pieces by
pushing till the end of the channel we created. There are two back and one corner pieces that need to be
installed on the product base. Poufs are connected to the corners with connectors. You need to connect
one side of the fastener, the other side comes pre installed. You can assemble the product using a
screwdriver.
Installation Power drill is enough to install legs.
Package includes
Legs and installation hardware come with the package.

Part List
A: B C: D: E: F:
Plastic Leg
12 pieces Lockable Castor
Wheel
4 pieces
4x35 Screw
28 pieces
5x50 Screw
48 pieces
Pouf Butt
Hinge
2 pieces
Arm Stand Box
1 piece
4x35 Screw
4x35 Screw
Pouf
5x50 Screw
Power drill
1
6 7
4 5
2 3
Decootka Assembly Manual
Insert the disassembled back module
into the space and press it firmly.
Screws that are used for
the arm stand installation
come with pachege.