pakoworld DOM User manual

DOM

1
Dear Costumer,
We design and produce our product for
people to love and have fun with them as
we do.
The product you bought was subjected to
all sorts of tests and control before sending
out to you.
Before start assembling, please check the
whole components and accessories
according to the lists. If you bought more
than one product, to prevent confusion be
sure that you completed the first product.
Then start the other product’s assembling.
Before start assembling, please clean all the
components with a damp cloth.
Also for usual cleaning, this will be enough.
Although all the products are produced
and packed carefully, sometimes happen
that some component is damaged during
the transportation. In such a case please
check the missing or dama
Do not use furniture forout of purposes.
If you would like to use it, please contact us
for further questions.
Do not directly contact your furniture with
excessive heat, cold and humidity because
the product can be affected.
WARNING
Serious or fatal crushing injuries can
occor from furniture tip-over. To prevent this
furniture from tipping over it must be permanently
fixed to the wall with the included wall attachment
devices.
Fixing devices for the wall are not included since
different wall materials require different types of
fixing devices. Use fixing devices suitable for the
walls in your home. For advice on suitable fixing
systems, contact your local specialized dealer.

3

4
A04
2
34
1
ATTENTION !!
A23 A22
Minifix is the main connection material used in ada products.
Before starting assembly, please check the drawings below.

5
A13
1
2
3
1
2
3
ATTENTION !!
Our products are screw system. Before you proceed with installation
try to understand the following