Palm T3 User manual

READ THIS FIRST

START HERE
Here’s what you’ll do:
•Charge and set up your Palm
™
Tungsten
™
T3 handheld.
•Install Palm
™
Desktop software.
•Learn to use your handheld.
Note!
You must install the version of Palm Desktop
software included in this package in order to
synchronize and to support all the features of
your handheld.
Contents
Palm Tungsten T3 handheld
USB HotSync®cradle
Software Installation CD
Power adapter

1Connect
a. Connect the HotSync
®
cradle to the computer.*
b. Plug the adapter into an outlet and into the cradle.
US B
* Systems without USB ports require a serial cradle
(sold separately).

2Charge
a. Place your Tungsten T3 handheld in the cradle.
b. Make sure that the indicator light is solid green. This means your handheld is
properly seated in the cradle and is being charged.*
c. Charge for at least two full hours.
Indicator light
* Problems? See “Troubleshooting” in the upcoming
pages.

3Set up
a. Remove the handheld from the cradle.
1. Tilt it forward.
2. Lift up.
b. Turn on the handheld by pressing the power
button.*
c. Remove the stylus.
d. Follow the instructions onscreen.
Power button
Stylus
Gently press the
top of the stylus
to remove it.
* Problems? See “Troubleshooting” in the
upcoming pages.

Input area
Expansion card slot
Stylus
Note Pad
Tasks
5-Way Navigator
Contacts
Power button
Home
Find
Menu
Calculator
Calendar
Headphone jack
IR (infrared) port
Indicator light
Speaker
Microphone
Voice Memo button
Press and hold to
record. Status bar
Input
Rotate screen
Full-screen writing
Alert
Bluetooth™controls
Time &
handheld settings
Menu
Find
Home

4Install Palm™Desktop software
on your computer
Windows:
Follow the installation instructions that appear
on your computer screen.*
Mac OS X:
Double-click the Palm Desktop Installer
icon.*
* Problems? If installation or the HotSync
process did not work, see “Troubleshooting” in
the upcoming pages.
INSTALL SOFTWARE
Tip for upgraders: To switch from Palm Desktop to
Microsoft Outlook synchronization, select “Install
Microsoft Outlook Conduits” at the end of the installation
process. For more information on the upgrade process,
go to www.palm.com/support/intl.

5Try it! Schedule an appointment
on your computer
ENTER AND SYNCHRONIZE YOUR
INFORMATION
Windows:
a. Double-click the Palm Desktop icon on your
computer desktop.
b. In Palm
™
Desktop software, click New Event
in the lower-left corner.
c. Enter the appointment, and then click OK to
save it.
Mac:
a. In the Palm folder, double-click the Palm
Desktop icon.
b. Create or select a username to identify your
information.
c. From the Create menu, select Event.
d. Enter the appointment, and then click OK to
save it.
If you synchronize with Microsoft Outlook, then schedule an appointment in Outlook, not Palm
Desktop software.

6Now schedule an appointment
on your handheld
a. Press the Calendar button twice.
b. Slide open the handheld to reveal the Input
area.
If you do not see the Input area, tap the
Input icon in the status bar.
c. Tap New.
d. Tap to set the time, and then tap OK.
e. Tap “abc” to display the onscreen
keyboard. Tap the keyboard to type.
New
Status bar
Input area
Calendar
abc