Panasonic AW-PS550N User manual

Operating Instructions
AC Adaptor
Model No. AW-PS550N
Before operating this product, please read the instructions carefully and save this manual for future use.

-2-
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (service) instructions in the
literature accompanying the appliance.
indicates safety information.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.
Safety precautions
WARNING:
• TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
• THE APPARATUS SHALL NOT BE EXPOSED
TO DRIPPING OR SPLASHING AND THAT
NO OBJECTS FILLED WITH LIQUIDS, SUCH
AS VASES, SHALL BE PLACED ON THE
APPARATUS.

-3-
Warning:
Do not install this product near any object that burns easily.
In case of using a halogen lamp, installation of it near such an
object could cause a fire due to the heat generated by the lamp.
For U.S.A
CAN ICES-3 (A)/NMB-3(A)
For CANADA
Safety precautions
FCC NOTICE (USA)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION:
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Warning:
To assure continued FCC emission limit compliance, the user must use only shielded interface cables when
connecting to external units. Also, any unauthorized changes or modifications to this equipment could void the user’s
authority to operate it.
indicates safety information.

-4-
Contents
Accessories ........................................................................4
Overview..............................................................................5
Precautions.........................................................................6
Parts and their functions ...................................................7
Connections........................................................................8
Troubleshooting................................................................11
Appearance.......................................................................12
Specifications ...................................................................13
Accessories
Operating Instructions (this manual) .................................................... 1
Power cable ......................................................................................... 1
DC cable with ø5.5 plug (approx. 3 meters [9.9 ft.])
[Model No. VEEB0115A] <UL Style 2464 2M18 AWG> ................. 1
DC cable with ø6.5 plug (approx. 3 meters [9.9 ft.])
[Model No. VEEB0116A] <UL Style 2464 2M18 AWG> ................. 1

-5-
Overview
This AC adaptor is designed to be used with convertible cameras and their peripherals, with multi-purpose cameras and their
peripherals, and with live switchers.
pThe DC cable with the 5.5 mm diameter plug [Model No. VEEB0115A] and the DC cable with the 6.5 mm diameter plug
[Model No. VEEB0116A] have different “+” and “–” polarities, so check the markings on the product to which the cable is to
be connected and on the cable itself.
pWhen this unit is to be discarded at the end of its service life, please consult with your dealer.
Caution
How to identify the cables
pDC cable with ø5.5 plug
<Background color : Blue / Font color : White>
pDC cable with ø6.5 plug
<Background color :Yellow / Font color : Black>

-6-
Precautions
Be sure to confirm the polarity display of the apparatus to connect.
Use the DC cable that meets the DC input polarity display of the apparatus to connect.
pThis AC adaptor cannot be connected in series or in
parallel.
pHandle the AC adaptor with care.
Dropping the AC adaptor or subjecting it to a strong
shock can cause a failure or an accident.
pOperating temperature range 0 °C (32 °F) to +40 °C
(104 °F)
Avoid using it in a cold place below 0 °C (32 °F) or a
hot place above +40 °C (104 °F) because low or high
temperature will adversely affect the parts inside.
pDo not use the AC adaptor outdoors since doing so
may cause trouble.
pMaintenance
Pull out the power cable plug, and wipe the AC adaptor
clean with a dry cloth.
If it is extremely dirty, dip a cloth into a diluted solution of
kitchen detergent (neutral), squeeze it hard, and wipe the
product surfaces carefully.
pDo not use benzine, paint thinner, or other volatile
liquids.
pWhen using a chemical duster, carefully read the
caution notes on its use.
Notes

-7-
Parts and their functions
Power indicator
This lights up green when AC power is supplied.
DC +12 V output connector [12V OUT]
(4-pin round connector)
Connect one end of the supplied DC cable to this
connector and the other end to the DC +12 V input
connector [DC 12 V IN] on the convertible camera and
its peripherals, on the multi-purpose camera and its
peripherals or on the live switcher.
1
2
3
4
Pin No. Signal name
1 GND
2NC
3NC
4 DC 12 V



-8-
Connections
The DC cable with the 5.5 mm diameter plug [Model No. VEEB0115A] and the DC cable with the 6.5 mm
diameter plug [Model No. VEEB0116A] have different “+” and “–” polarities, so check the markings on
the product to which the cable is to be connected and on the cable itself.
pThe power cable supplied with the unit has a 3-pin plug with a grounding terminal.
Connect it to a 3-pole outlet which has been connected to ground.
pSwitch off all the devices before making any connection.
pConnect the DC +12 V output connector of this adaptor to the DC +12 V input connector on the convertible camera with the
supplied DC cable with ø6.5 plug.
pPlease use the DC cable that fits the DC +12 V input connector of the equipment when connecting it with other equipment.

-9-
Connections
Power cable
AC adaptor
AW-PS550
DC cable with ø6.5 plug [Model No. VEEB0116A]
Compatible equipment:
Convertible cameras,
AK-HC1500,
AW-SW350, etc.
DC cable with ø5.5 plug [Model No. VEEB0115A]
Compatible equipment:
AW-RP555,
AW-RC400,
AW-IF400,
AW-DU600, etc.
Compatible equipment:
AW-RP655,
AW-RP400,
AK-HRP150, etc.

-10-
Connections
Power cable
AC adaptor
AW-PS550
DC cable
(supplied with the AW-PH360)
Indoor Pan-tilt Head:
AW-PH360
Depending on the time of manufacture, a DC cable may not have been supplied with the AW-PH360.
For details, consult your dealer.
side: Black
side: Red