Panasonic DM0706SY0 Instruction Manual

PQQW15408ZA DM0706SY0
LConnect the AC adaptor and telephone line cords and charge the battery for 7 hours
before initial use.
LPlease read this FAQ’s Guide before using the unit and save for future reference.
Call waiting (using the recall button)
FAQ’s Guide
Frequently asked questions
Question Cause & solution
How do I answer
the 2nd call when I
am talking with
someone?
How can I use the
call waiting service?
LPress {RECALL}{2}whilst on call 1, this will switch to 2nd
call, press {RECALL}{2}again to alternate between calls or
return to 1st call, or {RECALL}{1}to terminate current call.
L Call waiting is a service provided by your service provider/
telephone company. For additional information on the use of
this service contact your service provider/telephone company.
How can I make a
conference call?
Conference call with an outside call
When the other handset is on an outside call, press {LINE1}or
{LINE2}on the additional handset that is being used by another
handset to join a conversation “CALL SHARE”.
OR
Press {INTERCOM}and the extension number of the other
person that you desire to join the outside call. When the paged
party answers, press {CONF}to activate the conference call.
Conference call with 2 outside calls
1During an outside call, press {HOLD}2 times.
2To answer a 2nd call, press {LINE1}or {LINE2}.
To make a 2nd call, press {LINE1}or {LINE2}, then dial the
phone number.
3When the 2nd call is connected, press {CONF}to make a
conference call.
L If you subscribe to the conference call service provided by your
service provider/telephone company, please consult your service
provider/telephone company for full instructions on this feature.
TG6700AL_FAQ_Leaflet.fm Page 1 Monday, May 15, 2006 4:33 PM

–2 –
Battery charge
Range/Distance (“No link to base.”)
Why call waiting
does not work when
I press {RECALL}?
LYou may be required to change the recall time to “90ms”.
(Default: “100ms”)
LMake sure you have subscribed to the call waiting service.
Consult your service provider/telephone company.
Question Cause & solution
How do I charge the
battery?
LMake sure that the battery is properly installed in the handset
and the cover is closed. Place the handset on the base unit or
charger and confirm “Charging” is displayed.
LIt takes approx. 7 hours to charge the empty battery (see front
page). When it is fully charged, “Charge completed” is
displayed.
Can I leave the
handset on the
base unit or charger
after battery is fully
charged or each
call is finished?
LYou can place the handset on the base unit or charger
anytime. Battery is not overcharged and there is no damage
to the battery. By placing the handset on the base unit or
charger, it is always fully charged.
Where can I buy
new battery?
LBattery can be purchased through your local retailer.
Question Cause & solution
What is the range/
distance of my
cordless phone?
(Why am I getting
short or poor range/
distance on my
cordless phone?)
Why is “No link
to base.”
displayed on the
handset when I
press {C}?
LRange/distance is related to technology and environmental
factors. Therefore we cannot provide a given range or
distance.
LMake sure that the AC adaptor is properly connected to wall
socket and to the base unit and that beep tones sound when
you page the handset from the base unit.
LMove closer to the base unit (Allow up to 60 seconds for the
handset to reassign to the base unit.).
LIf you try manual registration process, allow up to 60 seconds
for the handset to reassign to the base unit.
LIf the above remedies do not solve the problem, refer to the
troubleshooting section in your Operating Instructions for
more information.
Question Cause & solution
TG6700AL_FAQ_Leaflet.fm Page 2 Monday, May 15, 2006 4:33 PM

–3 –
ADSL Issues (Noise on line)
Registration (Adding new handset)
Question Cause & solution
Why am I getting
noise on my
telephone line?
LIf you subscribe to ADSL service, we recommend you to
attach an ADSL filter to the telephone line between the base
unit and the telephone line socket. Contact your ADSL
service provider or purchase an ADSL filter from a retailer or
store. Refer to troubleshooting section for further details.
LIf you do not subscribe to ADSL service, there may be an
environmental issue that is causing the interference (noise).
Move closer to the base unit and check whether there is
noise. If there is no noise, some environmental interference
has caused the noise.
LIf there is noise intermittently, there is a possibility of
environmental interference. Refer to the troubleshooting.
Question Cause & solution
How can I register a
handset to the base
unit?
LMake sure that you follow registration procedure in Operating
Instructions:
– you are using the supplied handset that comes with the kit
(KX-TGA670AL).
– the AC adaptor is connected to the base unit.
– the handset is charged and not placed on the base unit.
– note the location of Intercom button on the base unit as this
is used to start registration process and is required to be
pressed for 3 seconds until IN USE indicator flashes and/or
single beep tone is heard.
Which handsets
can I buy to use
with this model?
LThe optional handset is KX-TGA670AL.
TG6700AL_FAQ_Leaflet.fm Page 3 Monday, May 15, 2006 4:33 PM

1Read the Operating Instructions or this
FAQ’s Guide.
2Visit our website:
http://www.panasonic.com.au
3Contact us via the web at:
http://www.panasonic.com.au/support/
Replacement batteries can be purchased from
your retailer.
IMPORTANT!
If your product is not
working properly. . .
TG6700AL_FAQ_Leaflet.fm Page 4 Monday, May 15, 2006 4:33 PM