Panasonic Palmcorder PalmSight PV-DV800 User manual

E
|
-
3
Digital
Palmcorder
Panasonic
PalmsSight^
Digital Video Camcorder
Operating Instructions
Model No. PV-DV800
Before attempting to connect, operate or adjust this product, ploase read these
instructions thoroughly,
Spanish Quick Use Guide is included.
r assistance, call 1-800-211-PANA(7262)
LOQTOPT4A

Things You Should Know l
Thank you for choosing Panasonic!
You have purchased one of the most sophisticated and reliable products on the market
today. Used properly, we're sure it will bring you and your family years of enjoyment.
Please take time to fill in the information below. The serial number is on the tag located on
the underside of your Palmcorder. Be sure to retain this manual as your convenient
Palmcorder information source.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
Unpack your Camcorder
1 pc. AC Adaptor 1 pc. Battery Pack 1 pc. A/V Cable
(PV-DAC10) (PV-DBP9 or PV- (LSJA0280)
with AC Cable and DC Cable DBP9A)
MÀ AS
1 pc. Lens Cap 1 pc. Color 1 pc. PC Connection 1 pc. CD-ROM of
(LSYFO395) Enhancement Light Cable for Windows Driver for Adobe
(VYKW3130) with (LSJA0276) PhotoDeluxe
Light Holder (VFTWO014)
AD
Key
1 pc. PHOTOVU 1 pc. 30 Min. Mini DV 1 pc. MultiMediaCard 1 pc. Shoulder
LINK DRIVER & Tape (AY-DVM30EJ} (LSFT0198) Strap (LSFC0013)
CARD LINK DRIVER
(LSFTO196)
Q a
Microsoft and Windows are registered trademarks of Microsoft in the United States and
other countries.
Adobe, the Adobe logo & PhotoDeluxe are trademarks of Adobe Systems Inc.
2 For assistance, call 1-800-211-PANA(7262)

Things You Should Know
Safety Precautions
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Your "^y Palmcorder is designed to record and play back in Standard Play (SP) mode
and Long (LP) mode.
It is recommended that only cassette tapes that have been tested and inspected for use in
VCR machines with the *» [y mark be used.
C)
D
=
5
a
o
pu
©)
-
mp
o
¡el
This symbol warns the user that uninsulated
CAUTION voltage within the unit may have sufficient
RISK OF ELECTRIC SHOCK OF ELECTRIC SHOCK magnitude to cause electric shock.
Po To a NOT OPEN Therefore, it is dangerous to make any kind
of contact with any inside part of this unit.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, This symbol alerts the user that important
DO NOT REMOVE COVER (OR BACK) literature concerning the operation and
NO USER-SERVICEABLE PARTS INSIDE maintenance of this unit has been included.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Therefore, it should be read carefully in orde
to avoid any problems.
The above markings are located on the appliance bottom cover.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful
interference when operated in a residential environment.
If this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, use the equipment in another location
and/or utilize an electrical outlet different from that used by the receiver.
If necessary, consult the dealer or an experienced radio/TV technician for help. You may
find the booklet, 'Something About Interference' available from FCC local regional offices
helpful.
FCC Warning: To assure continued FCC compliance, use only the provided shielded
interface cable when connecting digital video camera to computer in
accordance with instruction herein. Also, any unauthorized changes or
modifications to this equipment could void the user's authority to operate.

10.
Important Safeguards
Read Instructions — All the safety and operating
instructions Should be read before the unit is
operated.
Retain Instructions — The safety and operating
instructions should be retained for future reference.
Heed Warnings — All warnings on the unit and in the
operating instructions should be adhered to.
. Follow Instructions — All operating and maintenance
instructions should be followed.
Cleaning — Unplug this video unit from the wall outlet
before cleaning. Do not use liquid or aerosol
Cleaners. Use a dry cloth for cleaning.
Attachments — Do not use attachments not
recommended by the video product manufacturer as
they may be hazardous.
Water and Moisture — Do not use this video unit near
water — for example near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet basement, or
near a swimming pool, and the like.
Accessories — Do not place this video unit on an
unstabie cart, stand, tripod, bracket, or table. The
video unit may fall, causing serious injury to a child or
adult, and serious damage to the unit. Use only with
a cant, stand, tripod, bracket, or table recommended
by the manufacturer, or sold with the video unit. Any
mounting of the unit should follow the manufacturer's
instructions and should use a
mounting accessory
recommended by the
manufacturer. An appliance and
cart combination should be moved
with care. Quick stops, excessive
force, and uneven surfaces may
cause the appliance and cart
combination to overturn.
Ventilation — Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the video unit and to protect it from
overheating. These openings must not be blocked or
covered. Never place the video unit on a bed, sofa,
rug, or other similar surface, or near or over a radiator
or heat register. This video unit should not be placed
in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
Power Sources — This video unit should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer
or local power company, For video units intended to
be operated from battery power, or other sources,
refer to the operating instructions.
11. Grounding or Polarization — This video unit may be
equipped with either a polarized 2-wire AC
(Alternating Current) tine plug (a plug having one
blade wider than the other) or 3-wire grounding type
plug, a plug having a third (grounding) pin.
The 2-wire polarized plug will fit into the power outlet
only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try
reversing the plug. If the plug still fails to fit, contact
your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug.
The 3-wire grounding type plug will fit into a
grounding type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
grounding type plug.
12. Power-Cord Protection — Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords of
plugs, convenience receptacles, and the point
where they exit from the unit.
Outdoor Antenna Grounding — If an outside
antenna or cable system is connected to the video
unit, be sure the antenna or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Part 1 of
the Canadian Electrical Code, in USA Section 810
of the National Electrical Code, provides information
with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
13.
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIG
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
er e
pe GROUND CLAMPS
POWER SERVICE GROUNDING
= +" ELECTRODE SYSTEM
NEC - NATIONAL ELECTRICAL CODE (NEÇ ART 250, PART H)
14, Lightning — For added protection of this video unit
receiver during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage
to the video unit due to lightning and power-line
surges.
For assistance, call 1-800-21 1-PANA(7262)

Important Safeguards
15. Power Lines — Án outside antenna system should b. If any liquid has been spilled onto, or objects have
not be located in the vicinity of overhead power lines fallen into the video unit.
or other electric light or power circuits, or where it can c. If the video unit has been exposed to rain or water.
fall into such power lines or circuits. When installing d. If the video unit does not operate normally by
an outside antenna system, extreme care should be following the operating instructions. Adjust only
taken to keep from touching such power lines or those controls that are covered by the operating
circuits as contact with them might be fatal. instructions, as an improper adjustment of other
16. Overloading — Do not overload wall outlets and controls may result in damage and will often
extension cords as this can result in a risk of fire or require extensive work by a qualified technician to
electric shock. restore the video unit to its normal operation.
17. Objects and Liquids — Never push objects of any e. If the video unit has been dropped or the cabinet
kind into this video unit through openings as they has been damaged.
may touch dangerous voltage points or short out f. When the video unit exhibits a distinct change in
parts that could result in a fire or electric shock. performance — this indicates a need for service.
Never Spul liquid of any kind onto the video unit. 20. Replacement Parts — When replacement parts are
18. Servicing — Do not attempt to service this video unit required, be sure the service technician has used
yourself as opening or removing covers may expose replacement parts specified by the manufacturer or
you to dangerous voltage or other hazards. Refer all have the same characteristics as the original part.
servicing to qualified service personnel. Unauthorized substitutions may result in fire, electric
19. Damage Requiring Service — Unplug this video unit shock or other hazards.
from the wall outlet and refer servicing to qualified 21. Safety Check— Upon completion of any service or
service personnel under the following conditions: repairs to this video unit, ask the service technician to
a. When the power-supply cord or plug is damaged. perform safety checks to determine that the video
unit ts in safe operating order.
Precautions
USE & LOCATION
* TO AVOID SHOCK HAZARD ... Your Camcorder and power supply should not be exposed to rain or moisture. Do
not connect the power supply or operata your Camcorder if it gets wet. Your Camcorder has been designed for
outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct
splashing from a pool or even a cup of coffee. This action could permanently damage tha internal parts of your
Camcorder. Do not attempt to disassemblte this unit. There are no user serviceable parts inside. Unplug your
Camcorder from the power supply before cleaning.
* DO NOT AIM YOUR CAMCORDER AT THE SUN OR OTHER BRIGHT OBJECTS
* DO NOT LEAVE THE PALMCORDER WITH THE EVF AIMED DIRECTLY AT THE SUN AS THIS MAY CAUSE
DAMAGE TO THE INTERNAL PARTS OF THE EVF
* DO NOT EXPOSE YOUR CAMCORDER TO EXTENDED HIGH TEMPERATURE ... Such as, in direct sunlight,
inside a closed car, next to a heater, etc... This action could permanently damage the internal parts of your
Camcorder.
* AVOID SUDDEN CHANGES IN TEMPERATURE ... If the unit is suddenly moved from a cold place to a warm
place, moisture may form on the tape and inside the unit.
* DO NOT LEAVE YOUR CAMCORDER OR THE POWER SUPPLY TURNED ON WHEN NOT IN USE.
* STORAGE OF YOUR CAMCORDER ... Store and handle your Camcorder in a manner that will not subject it to
unnecessary movement (avoid shaking and striking). Your Camcorder contains a sensitive pick-up device which
could be damaged by improper handling or storage.
CARE
* TO CLEAN YOUR CAMCORDER ... Do not use strong or abrasive detergents when cleaning your Camcorder
body.
* TO PROTECT THE LENS ... Do not touch the surface of the lens with your hand. Use a commercial camcorder
lens solution and lens paper when cleaning the lens. Improper cleaning can scratch the lens coating.
* TO PROTECT THE FINISH OF YOUR CAMCORDER ... Before handling your Camcorder, make sure your hands
and face are free from any chemical products, such as suntan lotion, as it may damage the finish.
5
G)
(D
=
-
(Q
Y
"r
w
=
+
(D
¡el

Table of Contents
Getting Started
Things You. Should KhOW arco di id 2
Important Safeguaris incidan ceno red eer AA Ri Vd adela 4
bise: iio p [Mtt 5
CUCID ie iie desde ov vse wala re on p epa diete AA en Eun CUL PR RE UTN a EE SEV EC REN 8
SLID DIVING POWER e Gi 11
Gassetto Information caras raid ica 14
Color Enhancement DIGHES ta AA A A AA DAN ia 16
Attaching the Shoulder: SIFapi critica a ree SUR ia S ene aia 17
Setting the Clock td AAA Ar Ere up E 19
Using tha Palimcorder- Mh ia ii a 20
MENU OSD cla sg E a Ra onan nase fe edt sederet 21
Electronic Viewfinder/LCD Monitor Indications ...........ooooocccnnonocccannccnranancanarononinnncanrrcnrrins 26
Basic Operation
Cámera Recording EUER 30
Remote Control TOP. vids 34
Playback YOUR: Recordings cocidos bi 35
Special Features
Card: PROTOS ION vs us rer a RA ER Rn S Akehe Xx UR e SNMM RR ENTREE EESE Eeee 41
Recording images From a Tape ...ureserree eror itinere eA LIEN Na ainia 42
Playback: Still Images. A Cre crx n eE Eea uli Aa 43
Delete Specific Image Pages iii a 45
Dalétà- All Image: PAGS iii A A Ai xke Vis pee AEE 46
Format the MultiMediaCard iii a A 47
pg e CÓ —— P — — P ——— € 48
Dual Digital Electronic Image Stabilization System (D.E.I.S.) ........................seusssss 50
A abi ca hares saab al ect o ai br d a a bog taa a Eee uM aps DENM RA NUN RENE stage nae UY Gand Qux ME EUEA 51
Digital: Photo Shot: ninio ii Divas Ponta Vas eub s Epi Cida Rai ee te astas E 52
[pe ESI Ip RR TT Lt 52
Wite Balance NE S 53
Recording Stl Pictures S DE 53
E =i > EO A E E A EEE EES 53
E aee APEA Frea S paia aeaa Ta SE 54
Digital Functions A A A AA 55
FOCUS rt ii tte 56
Audio/Video Fade WT OUR dini cisco patei eive SRA ia 57
O UI 57
High-Speed ONU ista a a 58
Audio Dubbing using the External or Built-in Microphone .....oooocccccncononcancccancanonaroranconanos 59
Mermory-StoD Ediling «iacere anuencia ER XE AREA Sek coup ei adn RE 60
Copying your Tapes to S-VHS or VHS Cassette ................. sse 61
Copying S-VHS or VHS Cassette to your Tapes .................... eere 62
Copying from Digital Equipment (dubbing) ..........oooooonconcconcnonionacaninnnocnancnanonorrnnonanacnanccnnos 63
PC Connection with DV Interface Cable (IEEE 1394) ..o.oooncinniniccncccocccnacaricnoranaranoranaronos 64
PO CONABIO Maa uoti sepa bua A AO 65
Software installation (Windows 95/98) .......ooooconooccnoccconcccaninanonnnorananana conan carorarooronaracanocanras 66
CARD LIN Koa add adn 67
xs eue BN E 70
Adobe® PhotoDetuxe" HE 3D ina te Le sete cades pip dere Pee tr ere amen 72
Printer Connection: ia A a AEE tenere e Aa Mnt 73
6 For assistance, call 1-800-211-PANA(7262)

Table of Contents
For Your Information Y
Palmcorder Accessory System cocccoococicoconcrocncnnconanccanancan ocio nano cono nono nr nnr oro nnn carr nr nenas 74 =
Palmcorder Accessory Order FOr ..........ccccccccccsssssssresscsesssssessssusscssssssssssecssecesseetasseeaeeeas 75 WE
Notes- OM Ome retains si a a dona o 76 Ko
SA O A A rele iet 78 7
Before Requesting Service ............: doceo ce esecrs cobarde op ate Rache ma sra dab vhi 79 e
Hequest for Service NOCE odi code A ot tud ended 80 B.
index of CORITOIB A dederas oca br AE eae o e cree e be ei ge
UID ados censi se LLLA EE cs acne Lr E 86 o
Spanish Quick Use Guide/Guía Para Uso Rápido .....cococcciconicnonicoiononncnnnononnoncnnrcccono ninos 88
[pr e c TECH. 91

Insert the Battery Before you begin...
* Charge the Battery (page 11).
1 Slide the Viewfinder
backward to its fully
expanded position and then
tilt it upward.
Protection
Film
2
Insert
the
Battery
and
slide
it
down
: : until it locks with a click.
* Remove the Protection Film before use.
Insert Cassette
1 2 Slide TAPE EJECT
Set POWER Switch to Switch to open the
3 Insert a cassette with its
VCR or CAMERA. Cassette Compartment
window side facing up.
* Make sure the record tab is
closed (page 15).
Protection Film
+ Remove the
Protection Film
before use.
PUSH TO
CLOSE mark
4 Press PUSH TO CLOSE mark to close the
Cassette Compartment Cover.
TAPE
1 When using a Tape, you must set TAPE/M-CARD
M-CAR Switch to TAPE.
For assistance, call 1-800-211-PANA(7262)

Camera Recording
2 Adjust the Vision
When the LCD monitor is fully open, the
Viewfinder automatically turns OFF. Adjustment Control
to your eyesight.
3 Press LCD-OPEN Button 1o Viewfinder
unlock the LCD monitor.
Swing it fully open and _.,
adjust the angle. p T
C)
D
=
5
re)
(D
=p
S
c
D
Q
E
1 Set POWER Switch
to CAMERA.
LCD Monitor
4 Press RECORD/PAUSE Button
to start recording.
Press RECORD/PAUSE Button
Insert MultiMediaCard again to pause recording.
Be sure to insert the MultiMediaCard before using the Card PhotoShot (page 41).
M-CARD Door
1 Press LCD-OPEN Button to
unlock the LCD monitor.
Swing it fully open and
adjust the angle.
EJECT Switch
to open M-CARD
door.
LCD Monitor Insert the MultiMediaCard.
4 Close the M-CARD Door.
When using a MultiMediaCard, you must set
M-CAR TAPE/M-CARD Swit h to M-CARD.

INEA E OLUGA Before you begin...
(Liquid
Crystal
Display)
*
Charge
the
Battery
(page
11).
When the LCD monitor is fully open, the
Viewfinder automatically turns OFF.
OFF CAMERA
2 Press LCD-OPEN Button to
unlock the LCD monitor.
Swing it fully open and
adjust the angle.
3 Press REW Button to 4 Press PLAY Button to
rewind the tape. start playback.
——_f__KR>
==)
5 Press STOP Button
to stop playback.
10 For assistance, call 1-800-211-PANA(7262)

Supplying Power
Charge the Battery Pack on
the AC Adaptor
1 Connect and plug in the Cable as
shown.
* POWER Lamp will light.
2 Attach the battery as shown to
charge.
* Charge lamps on the AC Adaptor will -
flash and then turn solid red to
indicate current charge level. When
all 3 lamps are constantly on, the
battery is fully charged. (approx. 2
hour) Expect approx. 2 hour 50
minutes of operation when fully
charged (EVF usage).
CHARGE
Lamps 3
Remove the Battery.
Slide the Battery out and then lift up.
Charge Lamps
* The three Charge Lamps “50%”, “80%” and “100%” flash and then remain lit one after
another to indicate how much the Battery has been charged. When all three lamps are
lit, charging is finished.
* The Charge Lamps give a good approximate indication of the charging condition under
normal ambient temperature. However, when charging at high or low temperature, the
charge lamps may differ considerably from the actual charging condition.
Battery Charging
Confirming Marker Battery Charging Confirmation Marker
Use this marker as a reminder to yourself
when the battery is fully charged or in need
of a charge. This marker performs no
function and is for your reference only.
c E d.
N M * The Battery is no longer serviceable if
(PV-DBP9 only) the operation time is very short, even
after a sufficient charge.
* PV-DBP9A has no marker.
11
C)
4")
=
=
le]
o
=
to
>
D
a

Supplying Power
MM
all
BATTERY RELEASE Switch
Battery Care
Caution:
* Charge only with specified charger.
* The Battery can be charged within a
temperature range of 32? F (0? C) and
104? F (40? C).
* The Battery may be warm after charging
or just after use. This is normal.
* Do not use an insufficiently charged or
worn out Battery.
* [n extreme cold surroundings, Battery
charging time will increase.
Safety precautions:
* Do not get the Battery near, or dispose of
in fire.
* Do not directly connect (short circuit) the
positive (+) and negative (-) terminals.
* Never attempt to disassemble or reas-
semble the Battery.
1 Slide the Viewfinder backward to its
fully extended position and then tilt it
upward.
2 insert the Battery and slide it down
until it locks with a click.
To remove the Battery:
Slide the Battery upward while sliding the
BATTERY RELEASE.
To avoid damage to the Battery:
* Do not drop or jar the Battery.
* Use the Battery with specified models
only.
* [f the Battery is used in extremely high
temperatures, a safety device will
automatically prevent operation.
To insure longer battery life:
* While not in use, remove Battery from
the Palmcorder and AC Adaptor and
store in a cool, dark, dry place. If you
leave the Battery in the Palmcorder or on
AC Adaptor, the Battery will no longer be
rechargeable.
* Keep the Battery terminals clean.
12 For assistance, call 1-800-211-PANA(7262)

Supplying Power
AC Adaptor
1 Slide the Battery upward while sliding
the BATTERY RELEASE to remove
the Battery (page 12).
e
©
=
5
©
Y
=p
fo
i 1
=p
©
o.
2 Insert the DC Cable into the DC IN
Terminal.
3 Connect the other end of the DC
Cable to the AC Adaptor as shown.
4 Plug in the AC Adaptor.
* The POWER Lamp of the AC Adaptor
lights up.
DC IN Terminal 9
DC Cable
(Supplied)
* When not in use, unplug the AC Adaptor
from the AC outlet. (AC Adaptor
consumes 1W of electric power when
plugged into an AC outlet even when not
in use.)
| 13

Cassette Information
Cassette Insertion
TAPE EJECT
Switch
PUSH TO
CLOSE
mark
Before you begin...
* Connect the Palmcorder to a power
source (pages 12, 13).
1 Slide TAPE EJECT to open the
Cassette Compartment Cover.
2 Insert a cassette with its window side
facing up.
3 Press PUSH TO CLOSE mark to
close the Cassette Compartment
Cover.
Cassette Compartment
Cover
Cassette Ejection
e |f the Palmcorder is connected to a power
source, the cassette can be inserted and
ejected without turning the Palmcorder on.
Hint for recording position when
inserting cassette
* When you insert a cassette that is
partially recorded, use the Edit Search
Function to search for the position from
which you want to record again.
Especially when you want to record again
on a cassette that is already fully
recorded, be sure to first locate the
position where you want to add the new
recording, before starting to record.
1 Slide TAPE EJECT to open the
Cassette Compartment Cover.
2 Pull the cassette tape straight out.
Note:
+ If hand strap is tight it may prevent Cassette Compartment Cover
from fully opening for tape insert or eject. Loosen hand strap if
necessary.
* When inserting the cassette, make sure it faces in the right direction
and then push in completely.
For assistance, call 1-800-211-PANA(7262)

Cassette Information
Record Speed/Playback Time
Use only those tapes having the **[" logo indicating the 6.35mm digital standard.
Record Speed/Playback time
LP
AY-DVM30EA 45 minutes
Q)
D
=
5
©
g)
mr
D
mi
D
o.
AY-DVM60EA 90 minutes
AY-DVM80EA 80 minutes 120 minutes
Erase Protection
Cassettes have a sliding record tab to ensure recordings are not accidentally erased.
record tab
1 To prevent accidental erasure
Slide the tab to the left (open).
2 To record again
Slide the tab to the right (close).
15

Color Enhancement Light
Using
the
Light
Before
you
begin...
To brighten the natural colors in a scene. * Connect the Palmcorder to a power source
(pages 12, 13).
* Set POWER to CAMERA.
sp» Built-in Light Mount
1 Slide Light into the Built-in Light
Mount.
Be sure it locks into place.
2 Press LIGHT ON.
3 Press LIGHT again to OFF.
LIGHT RELEASE LIGHT Button
Button
To remove the Light:
Press LIGHT RELEASE and slide the Light
out of the mount.
Caution:
This light becomes hot during operation.
Make sure nothing covers the Light during
operation.
* Using the light will reduce battery operating time.
* If using the enhancement Light for an extended period of time, be sure to provide
ventilation when using it in a hot environment.
* Be sure LIGHT is set to OFF when not in use.
* Do not attempt to lift or carry the Palmcorder by holding the Enhancement Light.
* If light bulb needs to be replaced, take Light to your nearest service center.
16 For assistance, call 1-800-211-PANA(7262)

Attaching the Shoulder Strap
1 Undo the two strap ends from their
buckles.
G)
o
=
=)
(O
UD
mt
to
m!
=
O
©.
2 Remove the buckles from one end of
the strap.
3 Thread the strap (with no buckle)
through the Light Holder so that it
faces outward. Then reinsert the
buckle.
4 Thread the strap ends through the
Strap Attachment Rings.
5 Reinsert the strap ends through their
e buckles.
arm AUNO ANTNIN * Make sure the straps are not
— A twisted.
1 Loosen the strap from the Buckle and
create a loop.
2 Pull the strap firmiy through the Buckle
to shorten or lengthen the strap.
17

Attaching the Shoulder Strap
1 Insert the Light into the Light Holder for
Storage.
2 To remove the Light, press LIGHT
RELEASE and slide Light out from the
holder.
Adjust the length of the Hand Strap to
the size of your hand as illustrated.
Hand Strap
Lens Cap
(PS Attaching the Lens Cap Cord to the Hand
[) C ' Strap
Remove the Hand Strap from the front
clasp and run the Strap through the Lens
Cap Loop.
Reattach the Hand Strap.
18 For assistance, call 1-800-211-PANA(7262)

Setting the Clock
Set the Date and Time Before you begin...
: : ; , . t th
The date and time is calculated, including omnes! ine Fetimcorder toa power Squrce
ages 12, 13).
leap year, up to DEC 31 2089. . ER ON or VCR.
JOG KEY 1 Press MENU to display the Camera or
VCR mode menu screen (page 21).
CAMERA MENU VCR MENU
Q)
(D
=
=
(Q
o
que
0)
=
(v
Qo.
ODE
$ SETTING
SETTING : SETTING
F SETTING
ITLE
ECT:ROTATE JOG KEY *SELECT:ROTATE JOG KEY
£ :PU "SET OP
JOG KEY ; JOG KEY
"EXIT :PUSH MENU KEY ‘EXIT :PUSH MENU KEY
2 Rotate JOG KEY to select DEVI
Eaua], and then press JOG KEY
to display the DISPLAY SETTING
menu screen.
* DISPLAY SETTING menu is
displayed.
EXAMPLE:
3 Rotate JOG KEY to selectKoll(ofob e
rena ET], and then press JOG KEY to set
4 «USD» Push to ON (pages 22, 24).
Mii * The DATE/TIME SETTING menu
appears.
: JAN
4 *(FUSD* Rotate 4 Rotate JOG KEY to select the desired
iii numbers, then, press JOG KEY down
to fix that portion and move to the next.
: FEB Adjust the shaded items for the year,
month, day, hour, and minute.
Ma
:2000
e If you should pass the current year,
continue pressing down on the JOG KEY rt
until the year appears again. SELECT: PUSH | JOG KEY
* A built-in battery maintains clock ‘EXIT :PUSH MENU KEY
operation. lf the Palmcorder is not When time setting is completed, press
connected to a power source for a few the MENU to start the clock.
months, the built-in battery may discharge
and "CLOCK BATTERY" indication
appears (page 29).
19

Using the Palmcorder Menu
The Palmcorder features two menu Displaying the MENU
displays: one tor CAMERA mode :
(recording) and the other for VCR mode Before you begin...
(Playback)
(pages
21-25).
*
Connect
the
Palmcorder
to
a
power
source
(pages 12, 13).
.
"ES
*
Set
POWER
to
CAMERA
or
VCR.
e
While
the
Menu
screen
is
displayed,
you
cannot
record
or
play
the
tape.
1
Press
MENU
to
display
the
CAMERA
or
VCR
menu.
* While recording, the Menu screen will not
be displayed. (CAMERA MENU) (VCR MENU)
* While in playback, the Menu screen can
be displayed. “dor
u
PLAY SETTING
!EVF SETTING
: TOTITLE
*SELECT: ROTATE JOG KEY "SELECT: ROTATE JOG KEY
* DP G K ‘SET : PUSH Q40G KEY
‘EXIT :PUSH MENU KEY *EX(T :PUSH. MENU KEY
2 Rotate JOG KEY select a menu item.
Setting the MENU Items
(EX. VCR Mode menu)
1 Press down on the JOG KEY to set
your selection.
T
Qi
P
A
y
ooo
mm FONSI» ar IO—-mmco
oova0c
JOG KEY
Rotate JOG KEY to select a menu
item.
* The characters of your selection will
be inversely displayed.
VCR PLAY FUNCTION VCR PLAY FUNCTION
D.FEUNCTION flag MIRRO
STRO
Le
a
BE MOSAIC
M TRAIL
STRETCH
D.EFFECT OFF SEPIA EXiididi
MONO
*SELECT: ROTATE JOG KEY *SELECT:HOTATE JOG KEY
*SET : PUSH JOG KEY . :
E : PUSH JOG KEY
*EXIT :PUSH MENU KEY *EXIT :PUSH MENU KEY
3 Press down on the JOG KEY to set
your selection.
* The "9" mark will indicate your
selection.
4 Press MENU twice to exit the menu.
20 For assistance, call 1-800-211-PANA(7262)