Panasonic H-HSA12035PP User manual

file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_cvr.xml[11/12/2018 3:42:05 PM]
ORDER NO.DSC1703008CE
B26
Interchangeable Lens for Digital Camera
Model No. H-HSA12035PP
H-HSA12035E
H-HSA12035GK
© Panasonic Corporation 2017 Unauthorized copying and distribution is a violation of law.

file:///C|/Users/n.shetabi/AppData/Local/Temp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_01.xml[11/12/2018 3:42:33 PM]
1 Safety Precautions
1.1 Information for Your Safety

file:///C|/Users/n.shetabi/AppData/Local/Temp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_01.xml[11/12/2018 3:42:33 PM]
1.2 Cautions for use

file:///C|/Users/n.shetabi/AppData/Local/Temp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_01.xml[11/12/2018 3:42:33 PM]

file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_02.xml[11/12/2018 3:42:57 PM]
2 Service Navigation
2.1 Introduction
This service manual contains technical information, which allow service personnel’s to understand and service this model
Please place orders using the parts list and not the drawing reference numbers.

2.2 Important Notice
2.2.1 About LENS MAIN UNIT (Ref. 220)
1. 
lens adjustments.

2. 
210), to maintain Serial number of owner's original lens. Fig. 1-1

file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_02.xml[11/12/2018 3:42:57 PM]
3. No adjustment is required when replacing the part mentioned on Fig.1-1. But, when tighten the concerned screws,apply proper torque
mentioned on "6. Disassembly and Assembly Instruction" section.
2.2.2 About 5th Lens Frame Unit
The inside of the 5th Lens Frame Unit applied "Panasonic's Nano Surface Coating technology".
The damage causes by peeling off a Nano Surface Coating.
Never touch the inside of the 5th Lens Frame Unitwhile Disassembly and Assembly.

longer able to use, but need to be replaced.

file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_02.xml[11/12/2018 3:42:57 PM]

file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_03.xml[11/12/2018 3:43:17 PM]
3 Specifcations
3.1 Specifcations (Rated)

file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_03.xml[11/12/2018 3:43:17 PM]

file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_03.xml[11/12/2018 3:43:17 PM]
3.2 Accessories

file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_04.xml[11/12/2018 3:43:37 PM]
4 Location of Controls and Components

file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_05.xml[11/12/2018 3:44:18 PM]
5 Service Fixture & Tools
5.1 Service Fixture and Tools
The following Service Fixture and Tools are used for Checking & Servicing for this unit.
5.2 Clean Box

10,000 (Federal Standard 209D).
[NOTE]


file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_06.xml[11/12/2018 3:45:04 PM]
6 Disassembly and Assembly Instructions
6.1 Outline

Important:
1. It is recommended dealing with Clean Box, to keep maintaining the dustproof environment.
(Refef to "5.2. Clean Box " section of this Service Manual for details.)
2. To minimize the possibilities/risk of getting the dust/dirt on the lens surface, keep covering the lens unit with lens caps (front & rear), other
than necessary cases.
3. 
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).
NOTE:
1. 
following.
Caution
Keep covering the lens unit with Lens caps (front & rear), other than necessary
cases.
6.2 Disassembly Flow Chart
6.3 Disassembly Procedure
Important:


Less than class 10,000(Federal Standard 209D))

file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_06.xml[11/12/2018 3:45:04 PM]
6.3.1 Removal of the Zoom Rubber Ring
1. Remove the Zoom Rubber Ring.
6.3.2 Removal of the Decoration Ring
1. The Decoration Ring is sticked on the Hood Adapter.
2. Put the sheet so that the lens glass is fullty covered.
3. 
6.3.3 Removal of the Hood Adapter and the 1st Lens Frame Unit
1. Remove 4 screws (A) and the Hood Adapter with 1st Lens Frame Unit.
2. Remove 2 screws (B).
3. Separate the Hood Adapter and the 1st Lens Frame Unit.

file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_06.xml[11/12/2018 3:45:04 PM]
6.3.4 Removal of the 5th Lens Frame Unit
1. Remove 3 screws (C) and the 5th Lens Frame Unit.
Important:
Never touch the inside of the 5th Lens Frame Unit, because this place applied Nano Surface Coating.
6.3.5 Removal of the L Mount Unit and the Lens Mount Rubber
1. Remove screw (D), screw (E) and 4 screws (F).
2. Remove the L Mount Unit.

file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_06.xml[11/12/2018 3:45:04 PM]
3. Remove the Dustproof Rubber.
6.3.6 Removal of the Lens Mount Spacer
1. Remove the Lens Mount Spacer.
6.3.7 Removal of the Rear Frame Unit and the OIS SW Unit
1. Disconnect the Connector of the Lens P.C.B..
2. Remove 2 screws (G) and the Rear Frame Unit.

file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_06.xml[11/12/2018 3:45:04 PM]
3. Remove the Hook of the OIS SW Unit.
6.3.8 Removal of the Mount Contact Unit
1. Remove the Mount Connect Unit from Lens P.C.B..
6.4 Assembly Flow Chart

file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_06.xml[11/12/2018 3:45:04 PM]
6.5 Assembly procedure
Important:
1. 
6.5.1 Installation of the Mount Contact Unit
1. Connect FPC of the Mount Connect Unit to connector.
2. Install the Mount Contact Unit.
6.5.2 Installation of the OIS SW Unit and the Rear Frame Unit
1. Hook the upperside hook.
Then, push the underside hook into.
2. Install the Rear Frame Unit.
3. Connect FPC to connector of the Main P.C.B..

file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_06.xml[11/12/2018 3:45:04 PM]
4. 
6.5.3 Installation of the Lens Mount Spacer
1. Install the Lens Mount Spacer.
6.5.4 Installation of the Lens Mount Rubber and the L Mount Unit
1. Install the Lens Mount Rubber.
2. Install the L Mount Unit.
3. 

file:///C|/U...emp/Rar$EXa0.929/viewing/SGML_VIEW_DATA/ALL/H-HSA12035PP/SVC/DSC1703008CE/doc/DSC1703008CE_06.xml[11/12/2018 3:45:04 PM]
6.5.5 Installation of the 5th Lens Frame Unit
1. Install the 5th Lens Frame Unit.
2. 
Important:
Never touch the inside of the 5th Lens Frame Unit, because this place applied Nano Surface Coating.