Panasonic Lumix H-F008 User manual

Before use, please read these instructions completely.
E
Operating Instructions
INTERCHANGEABLE LENS FOR DIGITAL CAMERA
Model No. H-F008
VQT2W39-2
X0610HN2022
VQT2W39_Cover.fm 1 ページ ２０２２年２月２５日 金曜日 午後４時２５分

2
VQT2W39
Contents
Information for Your Safety.....................................2
Precautions........................................................... 5
Supplied Accessories ............................................. 6
Attaching/Detaching the Lens................................. 6
To use commercially available filters ...................... 8
Names and Functions of Components ................... 9
Cautions for Use..................................................... 9
Troubleshooting .................................................. 10
Specifications........................................................ 11
Information for Your Safety
Keep the unit as far away as possible from
electromagnetic equipment (such as microwave
ovens, TVs, video games, radio transmitters,
high-voltage lines etc.).
≥Do not use the camera near cell phones because
doing so may result in noise adversely affecting
the pictures and sound.
≥If the camera is adversely affected by
electromagnetic equipment and stops functioning
properly, turn the camera off and remove the
battery and/or the connected AC adaptor. Then
reinsert the battery and/or reconnect the AC
adaptor and turn the camera on.
VQT2W39_ENG.fm 2 ページ ２０２２年２月２５日 金曜日 午後３時４８分

3
VQT2W39
The lens can be used with a digital camera
compatible with the lens mount standard for the
“Micro Four ThirdsTM System”.
≥It cannot be mounted on the Four ThirdsTM mount
specification camera.
≥The digital camera illustrations in these operating
instructions show DMC-G2 as an example.
≥The appearance and specifications of products
described in this manual may differ from the actual
products you have purchased due to later
enhancements.
≥Four ThirdsTM and Four Thirds Logo marks are
trademarks or registered trademarks of Olympus
Imaging Corporation, in Japan, the United States,
the European Union and other countries.
≥Micro Four ThirdsTM and Micro Four Thirds Logo
marks are trademarks or registered trademarks of
Olympus Imaging Corporation, in Japan, the
United States, the European Union and other
countries.
≥G MICRO SYSTEM is a lens exchange type
digital camera system of LUMIX based on a Micro
Four Thirds System standard.
≥Other names, company names, and product
names printed in these instructions are
trademarks or registered trademarks of the
companies concerned.
ENGLISH
H-F008E-VQT2W39.book 3 ページ ２０１０年６月２日 水曜日 午前１０時４分

4
VQT2W39
-If you see this symbol-
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private
households)
This symbol on the products and/or accompanying documents means that used
electrical and electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to
designated collection points, where they will be accepted on a free of charge basis.
Alternatively, in some countries you may be able to return your products to your local
retailer upon the purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable resources and prevent
any potential negative effects on human health and the environment which could
otherwise arise from inappropriate waste handling. Please contact your local authority
for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct
method of disposal.
H-F008E-VQT2W39.book 4 ページ ２０１０年６月２日 水曜日 午前１０時４分

5
VQT2W39
∫Lens Care
≥Sand and dust can damage the lens. Make
sure that no sand or dust gets inside the lens
or the terminals when using the lens on a
beach, etc.
≥This lens is not waterproof. If drops of water
get onto the lens, wipe the lens with a dry
cloth.
≥Do not press the lens with excessive force.
≥When there is dirt (water, oil, and fingerprints, etc.)
on the surface of the lens, the picture may be
affected. Lightly wipe the surface of the lens with a
soft, dry cloth before and after taking pictures.
≥Do not place the lens mount facing downwards.
Do not allow the lens contact point 1to become
dirty.
∫About Condensation (Fogging of the
Lens)
≥Condensation occurs when there are differences
in temperature and humidity as described below.
Condensation can cause the lens to become dirty
and lead to mold and malfunctioning, so exercise
caution in the following situations:
– When the camera is brought indoors from outside
during cold weather
– When the camera is brought into an air-
conditioned car
– When cold air from an air conditioner is directly
blown onto the lens
– In humid places
≥Put the camera into a plastic bag to allow it to
acclimatise to the surrounding temperature in
order to prevent condensation. If condensation
occurs, turn the power off and leave it for about
two hours. Once the camera acclimatises to the
surrounding temperature the condensation will go
away naturally.
Precautions
H-F008E-VQT2W39.book 5 ページ ２０１０年６月２日 水曜日 午前１０時４分

6
VQT2W39
Supplied Accessories
[Inspection to be performed when you unpack the unit]
When removing the unit from its packing box, check
that the main unit and the supplied accessories are
there and also check their external appearance and
functions to verify that they have not sustained any
damage during distribution and transportation.
If you discover any trouble, contact your vendor
before using the product.
Product numbers correct as of May 2010. These
may be subject to change.
1Lens Storage Bag
2Lens Front Cap
3Lens Rear Cap
(The lens front cap and lens rear cap are
attached to the interchangeable lens at the time
of purchase.)
Attaching/Detaching the Lens
≥Refer also to the camera’s operating instructions
for attaching and detaching the lens.
∫Attaching the Lens
≥Check that the camera is turned off.
1 Turn the lens rear cap
to detach it.
A: Lens Rear Cap
2Align the lens fitting
marks B(red marks) on
the camera body and the
lens and then rotate the
lens in the direction of
the arrow until it clicks.
• Do not press the lens release button Cwhen
you attach a lens.
• Do not try to attach the lens when holding it at an
angle to the camera body as the lens mount may
get scratched.
• Check that the lens is attached correctly.
VFC4456 VFC4560 VFC4315
312







H-F008E-VQT2W39.book 6 ページ ２０１０年６月２日 水曜日 午前１０時４分

7
VQT2W39
∫Detaching the Lens
≥Check that the camera is turned off.
Press the lens release button Dwhile
turning the lens as far as possible in the
direction of the arrow to detach it.
• Attach the lens rear cap so
that the lens contact point
does not get scratched.
• Attach the body cap to the
camera so no dirt or dust will
get inside the main unit.
∫Attaching and Detaching the Lens Front
Cap
≥Be careful not to lose
the lens front cap.
∫Features of this lens
≥This lens is an equisolid angle projection fisheye
lens with a 180xfield of view in a diagonal
direction. Be careful about the legs of the tripod or
arms and legs of the photographer entering the
frame when taking pictures.
≥As the fisheye lens captures images of a very
wide angle, the characteristics of the lens causes
subjects close to the perimeter of the image to
appear extremely warped, or causes the size or
relative position of the subjects to look different
when pictures are taken. The image will look
greatly different even with the slightest movement
of the camera, so view the screen and check the
composition of the picture when taking pictures.

H-F008E-VQT2W39.book 7 ページ ２０１０年６月２日 水曜日 午前１０時４分

8
VQT2W39
To use commercially
available filters
≥There is a filter holder at the rear of this lens. To
use it, insert a commercially available sheet filter,
such as a gelatin filter or similar, into the filter
holder.
1 Prepare the filter.
• Cut the filter to the
size that can be used
with this lens.
(right image)
Size of the filter
A: 21.5 mm to 22 mm
B:3mmto4mm
2 Insert the cut filter Call the way into the
filter holder D.
E: Lens fitting mark
• To remove the filter, pull it out straight.
3 Mount the lens onto the digital camera.










H-F008E-VQT2W39.book 8 ページ ２０１０年６月２日 水曜日 午前１０時４分

9
VQT2W39
Names and Functions of
Components
∫Lens
1Lens surface
2Lens hood
3Focus ring
Rotate to focus when taking pictures with manual focus.
4Filter holder
5Contact point
6Lens fitting mark
Note
≥Since this lens is a fisheye lens with 180x diagonal
field of view, the perimeter of the image may
become dark (vignette) when a flash is used to
take pictures.
Cautions for Use
∫About the Lens
Take care not to drop or knock the lens. Also
take care not to put a lot of pressure on the lens.
≥Take care not to drop the bag that you inserted the
lens in as it may strongly shock the lens. The
camera may stop operating normally and pictures
may no longer be recorded. Also, the lens may be
damaged.
When using pesticides and other volatile
substances around the camera make sure that
they do not get onto the lens.
≥If such substances get onto the lens they can
damage the exterior case or cause the paint to
peel.
23 4
1 5
6
VQT2W39_ENG.fm 9 ページ ２０２２年２月２５日 金曜日 午後３時４８分

10
VQT2W39
Do not carry the unit when it is still attached to
the camera body.
≥Under no circumstances should the unit be stored
in any of the following locations since doing so
may cause problems in operation or
malfunctioning.
– In direct sunlight or on a beach in summer
– In locations with high temperatures and humidity
levels or where the changes in temperature and
humidity are acute
– In locations with high concentrations of sand,
dust or dirt
– Where there is fire
– Near heaters, air conditioners or humidifiers
– Where water may make the unit wet
– Where there is vibration
– Inside a vehicle
≥Refer also to the operating instructions of the
digital camera.
≥When the unit is not going to be used for a
prolonged period, we recommend storing with a
desiccant (silica gel). Failure to do so may result in
performance failure caused by mold, etc. It is
recommended that you check the unit’s operation
prior to use.
≥Do not leave the lens in contact with rubber or
plastic products for extended periods of time.
≥Do not touch the lens contact point. Doing so can
cause failure of the unit.
≥Do not disassemble or alter the unit.
Do not use benzine, thinner, alcohol or other
similar cleaning agents to clean the lens glass or
exterior cabinet.
≥Using solvents can damage the lens or cause the
paint to peel.
≥Wipe off any dust or fingerprints with a soft, dry
cloth.
≥Use a dry, dust cloth to remove dirt and dust on
the focus ring.
≥Do not use a household detergent or a chemically
treated cloth.
A sound is heard when the camera is turned on
or off.
≥This is the sound of lens or aperture movement
and is not a malfunction.
Troubleshooting
VQT2W39_ENG.fm 10 ページ ２０２２年２月２５日 金曜日 午後３時４８分