Panasonic S-E70200 User manual

取扱説明書
デジタルカメラ用 交換レンズ
Operating Instructions
INTERCHANGEABLE LENS FOR DIGITAL CAMERA
Manuel d’utilisation
OBJECTIF INTERCHANGEABLE POUR APPAREIL PHOTO NUMÉRIQUE
Bedienungsanleitung
WECHSELOBJEKTIV FÜR DIGITAL-KAMERA
Instrucciones de funcionamiento
ÓPTICA INTERCAMBIABLE PARA CÁMARA DIGITAL
Istruzioni per l’uso
LENTI INTERCAMBIABILI PER FOTOCAMERA DIGITALE
使用說明書
數位相機用可替換鏡頭
使用说明书
数码相机使用的可更换镜头
Инструкция по эксплуатации
СМЕННЫЙ ОБЪЕКТИВ ДЛЯ ЦИФРОВОЙ ФОТОКАМЕРЫ
S-E70200
until
2020/01/01
品番/Model No./Modèle/
Model Nr./Modelo N./Modello N./
型號 /型号 /Модель №.
日本語 2
ENGLISH 19
FRANÇAIS 35
DEUTSCH 47
ESPAÑOL 57
ITALIANO 68
中文 （繁體） 78
中文 （简体） 89
РУССКИЙ ЯЗЫК 101
DUMMY
DVQX1999ZA
F1119HN0
S-E70200-DVQX1999.book 1 ページ ２０１９年１０月２８日 月曜日 午前１０時２６分

19
(ENG) DVQX1999
ENGLISH
Operating Instructions
INTERCHANGEABLE LENS
FOR DIGITAL CAMERA
Thank you for purchasing Panasonic product.
Please read these instructions carefully before using this
product, and save this manual for future use.
Register online at http://shop.panasonic.com/support
(U.S. customers only)
This lens can be attached for use to a digital camera that
complies with the Leica Camera AG L-Mount standard.
It is compatible with a 35 mm full-frame image sensor.
0For smoother recording, we recommend updating the
firmware of the digital camera/lens to the latest version.
0For the latest information on the firmware or to
download/update the firmware, visit the following
support website:
https://panasonic.jp/support/global/cs/dsc/
(English only)
0L-Mount is a trademark or registered trademark of
Leica Camera AG.
0Other names, company names, product names
mentioned in this document are trademarks or
registered trademarks of the companies concerned.
Information for Your Safety .................................... 20
Precautions ............................................................ 21
Supplied Accessories............................................. 22
Names and Functions of Components................... 23
Attaching the Lens ................................................. 24
Switching AF/MF.................................................... 26
Using the Tripod Mount..........................................26
Cautions for Use .................................................... 28
Troubleshooting ..................................................... 28
Specifications......................................................... 29
Limited Warranty (ONLY FOR U.S.A.)................... 30
Limited Warranty (ONLY FOR CANADA) .............. 32
If you have any questions, visit:
USA : http://shop.panasonic.com/support
Canada : www.panasonic.ca/english/support
Contents
S-E70200-DVQX1999.book 19 ページ ２０１９年１０月２８日 月曜日 午前１０時２６分

20 DVQX1999 (ENG)
Information for Your Safety
Keep the unit as far away as possible from electromagnetic
equipment (such as microwave ovens, TVs, video games,
radio transmitters, high-voltage lines etc.).
0 Do not use the camera near cell phones because doing so may
result in noise adversely affecting the pictures and sound.
0If the camera is adversely affected by electromagnetic
equipment and stops functioning properly, turn the
camera off and remove the battery and/or the
connected AC adaptor. Then reinsert the battery and/or
reconnect the AC adaptor and turn the camera on.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
0Reorient or relocate the receiving antenna.
0Increase the separation between the equipment and
receiver.
0Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
0Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution:
0Any unauthorized changes or modifications to this
equipment would void the user’s authority to operate
this device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired operation.
Supplier’s Declaration of Conformity
Trade Name: Panasonic
Model No.: S-E70200
Responsible Party:
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ
07102-5490
Support Contact: http://shop.panasonic.com/support
THE FOLLOWING APPLIES ONLY IN CANADA.
CAN ICES-3(B)/NMB-3(B)
S-E70200-DVQX1999.book 20 ページ ２０１９年１０月２８日 月曜日 午前１０時２６分

21
(ENG) DVQX1999
ENGLISH
-If you see this symbol-
Precautions
∫Handling of the lens
0When using this lens, take care not to drop, bump,
or apply undue force to it. Doing so may cause
malfunction or damage to this lens and the digital
camera.
0Images may be affected by dust, dirt, and soiling
(water, oil, fingerprints, etc.) on the lens surface. Before
and after recording, use a blower to blow off dust and
dirt from the surface of the lens, then lightly wipe with a
soft dry cloth to remove soiling.
0When the lens is not in use, be sure to attach the lens
cap and lens rear cap to prevent dust and other
particles from accumulating on or entering the lens.
0To protect the lens contact
points (A), do not do the
following. These may
cause malfunction.
– Touch the lens contact
points.
– Allow the lens contact
points to become dirty.
– Place the lens with its
mount surface facing
down.
∫Dust and splash resistant
0 Splash Resistant and Dust Resistant are terms used to
describe an extra level of protection this lens offers
against exposure to a minimal amount of moisture,
water or dust. These terms do not guarantee that
damage will not occur if this lens is subjected to direct
contact with water or dust infiltration.
Take the following precautions to provide satisfactory
dust and splash resistant performance. If the lens is
not working properly, consult the dealer or Panasonic.
Disposal of Old Equipment
Only for European Union and countries with recycling
systems
This symbol on the products, packaging,
and/or accompanying documents means
that used electrical and electronic products
must not be mixed with general household
waste.
For proper treatment, recovery and recycling
of old products, please take them to
applicable collection points in accordance with your
national legislation.
By disposing of them correctly, you will help to save
valuable resources and prevent any potential negative
effects on human health and the environment.
For more information about collection and recycling,
please contact your local authority.
Penalties may be applicable for incorrect disposal of
this waste, in accordance with national legislation.
S-E70200-DVQX1999.book 21 ページ ２０１９年１０月２８日 月曜日 午前１０時２６分

22 DVQX1999 (ENG)
– Attach to a digital camera that is dust and splash
resistant.
– When attaching or removing the lens, be careful so
that foreign objects such as sand, dust, and water
droplets do not adhere to or enter the lens mount
rubber, contact points, digital camera and lens.
– If the lens is exposed to water droplets or other
liquids, wipe them off with a soft, dry cloth.
0To improve the dust and splash resistant performance
of the lens, a lens mount rubber is used in the mount.
– The lens mount rubber will leave scuff marks on the
digital camera mount, but this does not impact
performance.
– For information on changing the lens mount rubber,
contact Panasonic.
∫Condensation (when the lens is fogged up)
0Condensation occurs when the ambient temperature or
humidity changes. Please be careful, as it may cause
lens stains, mold and malfunction.
0If condensation occurs, turn off the digital camera and
leave it for approx. 2 hours. The fog will disappear
naturally when the temperature of the digital camera
becomes close to the ambient temperature.
0The appearance and specifications of products
described in this document may differ from the actual
products you have purchased due to later
enhancements.
Supplied Accessories
Check that all the accessories are supplied before using
the product.
Product numbers correct as of November 2019. These
may be subject to change.
¢Fitted to the lens at the time of purchase.
1 Lens pouch
2 Lens hood
3 Lens cap¢
4 Lens rear cap¢
5 Tripod mount¢
DVPY1016Z
1ZE2SE70200Z
2134
CGE1Z280Z RGE1Z276Z
5
DVXL1018Z
S-E70200-DVQX1999.book 22 ページ ２０１９年１０月２８日 月曜日 午前１０時２６分

23
(ENG) DVQX1999
ENGLISH
Names and Functions of
Components
1Lens surface
2Focus ring
Switches between AF (auto focus) and MF (manual
focus) by sliding the focus ring forwards or
backwards. (l 26)
Rotates the focus ring to focus when set to MF.
3Focus buttons
Focus is locked while the focus button is pressed
and held.
0 The 3 Focus buttons each work the same.
0 You can change the focus button function with the
menus of a compatible digital camera. Refer to the
operating instructions for the digital camera for
details.
4Zoom ring
Zooms to telephoto or wide-angle.
5Tripod mount (l 26)
6Tripod mount locking knob
7Focusing distance range selector switch
You can select the focusing distance range for AF.
[FULL]: 0.95 m (3.2 feet) to ¶
[0.95m-5m]: 0.95 m (3.2 feet) to 5.0 m (16 feet)
[5m-¶]: 5.0 m (16 feet) to ¶
0 The focusing speed of AF increases when you limit
the focusing distance range for AF.
1 83
10
9
24567
11
S-E70200-DVQX1999.book 23 ページ ２０１９年１０月２８日 月曜日 午前１０時２６分

24 DVQX1999 (ENG)
8O.I.S. switch
You can use the image stabilizer function to match
the recording method.
[MODE1]: Image stabilizer suited to normal
recording
[MODE2]: Image stabilizer suited to panning (the
panning direction is automatically
detected and compensated)
[OFF]: The image stabilizer does not work.
0We recommend setting the O.I.S. switch to [OFF]
when using a tripod.
9Lens mount rubber
10 Lens fitting mark
11 Contact points
Note
0There may be differences in focus when you use zoom
after focusing. Focus again.
0While shooting video, in some situations, AF operation
and stabilizer operation of the lens may be heard. It is
recommended to record as follows:
– Set to MF to record
– Turn off the image stabilizer and use a tripod for
recording
Attaching the Lens
For information on how to attach the lens, refer to the
operating instructions for your digital camera.
0Attach the lens after turning off the digital camera.
0Attach the lens after removing
the lens rear cap.
0After removing the lens from
the digital camera, be sure to
attach the lens cap and lens
rear cap to prevent dust and
other particles from
accumulating on or entering
the lens.
∫Attaching the lens hood
Hold the lens hood with your fingers
placed as shown in the picture.
0Do not hold the lens hood in a way
that twists or bends it.


S-E70200-DVQX1999.book 24 ページ ２０１９年１０月２８日 月曜日 午前１０時２６分

25
(ENG) DVQX1999
ENGLISH
1Align mark A ( ) on
the lens hood with the
mark on the tip of the
lens.
2Rotate the lens hood in
the direction of the
arrow to align mark B
( ) on the lens hood
with the mark on the tip
of the lens.
0Attach the lens hood by
rotating it until it clicks.
∫Removing the lens hood
While pressing the lens
hood button C, rotate the
lens hood in the direction
of the arrow and then
remove it.
Note
0When carrying, the lens hood can be attached in the
reverse direction.
1Remove the lens hood.
2Align mark B ( ) on the lens hood with the mark
on the tip of the lens.
3Attach the lens hood by rotating it in the direction of
the arrow until it clicks.
0It is recommended to remove the lens hood during
flash photography as the lens hood can block the light
from the flash.
0To prevent dropping of the lens, you should never carry
the lens by just holding the lens hood.
∫Notes on filter use
0It is possible to attach the lens cap or the lens hood
with the filter already attached.
0There may be some vignetting in recorded images if
multiple filters are attached simultaneously.
0It is not possible to attach any items other than filters
such as a conversion lens or adaptor to the front of the
lens and use it in combination with this lens.
Lens damage may result if such items are attached.




S-E70200-DVQX1999.book 25 ページ ２０１９年１０月２８日 月曜日 午前１０時２６分

26 DVQX1999 (ENG)
∫Notes on using the teleconverter
0A teleconverter (DMW-STC14/DMW-STC20: optional)
can be used with this lens.
0Refer to the website for the most current information
regarding supported teleconverters.
0Do not use other than the supported teleconverters.
Doing so may cause damage or a deterioration in
performance to the lens or teleconverter.
Switching AF/MF
Switch AF/MF by sliding the
focus ring
A forwards or
backwards (focus clutch
mechanism).
0When the digital camera is
set to MF, the operation will
be MF irrespective of the
position of the focus ring.
0Check the distance scale B
when using MF. Use it as a
guide for focusing.
0You can set the amount that
the focus moves with the
focus ring using menu
settings in compatible digital
cameras. Switch the lens to
AF and set the digital camera to MF. Refer to the
operating instructions for the digital camera for details.
Using the Tripod Mount
When using a tripod, attach it
to the tripod mount of the
lens.
0When a tripod is attached to
the tripod mount of the
digital camera, damage to
the lens may result when
carrying.
∫Changing the vertical/horizontal orientation
This way, you can quickly switch between the vertical
and horizontal orientation of the digital camera while the
tripod is in use.
1Rotate the tripod mount
locking knob in the
direction indicated by the
arrow to loosen.
AF MF

3.2
0.95 1.2 1.5 2.2 4 10
45 7 1328
ĩm
ft

S-E70200-DVQX1999.book 26 ページ ２０１９年１０月２８日 月曜日 午前１０時２６分

27
(ENG) DVQX1999
ENGLISH
2Rotate the digital
camera and lens to
change the position.
3Rotate the tripod
mount locking knob in the
direction indicated by the
arrow to tighten firmly.
∫Detaching the tripod mount
1Rotate the tripod
mount locking knob in
the direction indicated
by the arrow to loosen.
2Match the marks on the
tripod mount and the
tripod mount locking
knob.
3While pulling out the
tripod mount locking
knob, open and remove
the tripod mount.
0When detaching the
tripod mount, support the
lens and digital camera
to ensure they do not fall.
∫Attaching the tripod mount
Attach by reversing the steps used to detach.
0Match the marks on the
tripod mount and the
lens.
0When attaching the
tripod mount, pull out the
tripod mount locking
knob first and then close
the tripod mount.
0Be careful not to pinch
your fingers between the
tripod mount and the lens.
S-E70200-DVQX1999.book 27 ページ ２０１９年１０月２８日 月曜日 午前１０時２６分