Panasonic KX-TCD210G User manual

This unit is compatible with Caller ID and SMS. To use these features,
you must subscribe to the appropriate service of your service provider.
Charge the batteries for about 7 hours before initial use.
Please read these operating instructions before using the unit and save them for future
reference.
Operating Instructions
Model No. KX-TCD210G
Digital Cordless Phone
TCD210G(e-g).book Page 1 Friday, January 14, 2005 1:42 PM

Introduction
2
Introduction
Thank you for purchasing a new Panasonic digital cordless phone.
For your future reference
Attach or keep original receipt to assist with any repair under warranty.
Hinweis:
L This equipment is designed for use on the Germany analogue telephone network.
L In the event of problems, you should contact your equipment supplier in the first instance.
Declaration of Conformity:
L Panasonic Communications Co., Ltd. declares that this equipment is in compliance with the essential
requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment
(R&TTE) Directive 1999/5/EC.
Declarations of Conformity for the relevant Panasonic products described in this manual are available
for download by visiting:
http://www.doc.panasonic.de
Contact:
Panasonic Services Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, F.R. Germany
Trademarks:
L Eatoni and LetterWise are trademarks of Eatoni Ergonomics, Inc.
Serial No. (found on the bottom of the base unit)
Date of purchase
Name and address of dealer
TCD210G(e-g).book Page 2 Friday, January 14, 2005 1:42 PM

Feature highlights
3
Feature highlights
Phonebook
The phonebook allows you to make calls without having to dial manually. You can
add 200 names and phone numbers to the phonebook, assign each phonebook
entry to the desired category, and search for phonebook entries by name or
category.
Phonebook category
If you subscribe to Caller ID service, phonebook categories (Seite 14) can help you
identify who is calling by using different ringtones for different categories of callers
(Seite 27).
Night mode
Night mode allows you to select a block of time during which the handset/base unit
will not ring, useful if you do not want to be disturbed, for example, while sleeping.
Night mode can be set independently for the handset (Seite 18) and base unit
(Seite 23).
SMS (Short Message Service)
SMS allows you to send and receive text messages between other fixed-line and
mobile phones that support compatible SMS networks and features. SMS features
are available only after subscribing to Caller ID and/or appropriate service (Seite
29).
Polyphonic ringtones for handset
You can change the ringtone heard when the handset rings for outside calls and
intercom calls. You can choose from 5 ringtones and 10 melody tones (Seite 18).
Tom
TCD210G(e-g).book Page 3 Friday, January 14, 2005 1:42 PM

Inhalt
4
Preparation
Accessory information. . . . . . . . . . . . . . . . . . . 5
Important information . . . . . . . . . . . . . . . . . . . 6
Controls and displays . . . . . . . . . . . . . . . . . . . 7
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Battery installation. . . . . . . . . . . . . . . . . . . . . . 9
Battery charge . . . . . . . . . . . . . . . . . . . . . . . . 9
Battery replacement . . . . . . . . . . . . . . . . . . . 10
Turning the power on/off . . . . . . . . . . . . . . . . 10
Setting the date and time . . . . . . . . . . . . . . . 10
Making/Answering Calls
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . 11
Answering calls. . . . . . . . . . . . . . . . . . . . . . . 13
Phonebook
Using the phonebook . . . . . . . . . . . . . . . . . . 14
Copying phonebook entries to other handsets16
Handset Settings
Guide to handset settings . . . . . . . . . . . . . . . 17
Time settings. . . . . . . . . . . . . . . . . . . . . . . . . 18
Ringer setup . . . . . . . . . . . . . . . . . . . . . . . . . 18
Night mode . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Display setup . . . . . . . . . . . . . . . . . . . . . . . . 20
Call options . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Other options . . . . . . . . . . . . . . . . . . . . . . . . 21
Base Unit Settings
Guide to base unit settings . . . . . . . . . . . . . . 22
Ringer setup . . . . . . . . . . . . . . . . . . . . . . . . . 23
Call options . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Other options . . . . . . . . . . . . . . . . . . . . . . . . 26
Caller ID Service
Using Caller ID service . . . . . . . . . . . . . . . . . 27
Caller list . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
SMS (Short Message Service)
Using SMS (Short Message Service) . . . . . . 29
Turning SMS on/off . . . . . . . . . . . . . . . . . . . . 29
Changing SMS message centre numbers . . 29
Sending a message . . . . . . . . . . . . . . . . . . . 30
Receiving a message . . . . . . . . . . . . . . . . . . 31
Guide to SMS settings . . . . . . . . . . . . . . . . . 32
Available character entries for SMS . . . . . . . 34
Multi-unit Operation
Operating additional units . . . . . . . . . . . . . . .36
Registering a handset to a base unit . . . . . . .36
Intercom between handsets. . . . . . . . . . . . . .38
Transferring calls between handsets, conference
calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Useful Information
Wall mounting . . . . . . . . . . . . . . . . . . . . . . . .39
Available character entries. . . . . . . . . . . . . . .40
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . .43
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .46
Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Free Troubleshooting . . . . . . . . . . . . . . . . . . .48
End-User Hotline for Use-related and General
Queries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Index
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
TCD210G(e-g).book Page 4 Friday, January 14, 2005 1:42 PM

Preparation
5
Accessory information
Included accessories
Additional/replacement accessories
AC adaptor
PQLV19CE
Telephone line cord Rechargeable batteries
AAA (R03) size
HHR-4EPT
Handset cover Operating instructions Quick guide
Model No. Description
P03P 2 rechargeable nickel metal hydride (Ni-MH) batteries
KX-TCA121EX Additional Digital Cordless Handset
KX-A272 DECT repeater
TCD210G(e-g).book Page 5 Friday, January 14, 2005 1:42 PM

Preparation
6
Important information
General
L Use only the AC adaptor included with this
product, noted on Seite 5.
L Do not connect the AC adaptor to any AC
outlet other than a standard 220–240 V AC
outlet.
L This product is unable to make calls when:
– The portable handset battery(ies) need
recharging or have failed.
– There is a power failure.
– The key lock feature is turned on.
– The call bar feature is turned on (only phone
numbers stored in the unit as emergency
numbers can be called).
L Do not open the base unit or handset other
than to replace the battery(ies).
L This product should not be used near
emergency/intensive care medical equipment
and should not be used by people with
pacemakers.
L Care should be taken that objects do not fall
onto, and liquids are not spilled into, the unit.
Do not subject this product to excessive
smoke, dust, mechanical vibration or shock.
Environment
L Do not use this product near water.
L This product should be kept away from heat
sources such as radiators, cookers, etc. It
should also not be placed in rooms where the
temperature is less than 5 °C or greater than
40 °C.
L The AC adaptor is used as the main
disconnect device. Ensure that the AC outlet is
installed near the unit and is easily accessible.
Warnung:
L To prevent the risk of electrical shock, do not
expose this product to rain or any other type of
moisture.
Location
L For maximum distance and noise-free
operation, place your base unit:
– Away from electrical appliances such as
TVs, radios, personal computers or other
phones.
– In a convenient, high and central location.
Battery caution
L We recommend using the battery(ies) noted on
Seite 5.
Use only rechargeable battery(ies).
L Do not mix old and new batteries.
L Do not dispose of the battery(ies) in a fire, as
they may explode. Check local waste
management codes for special disposal
instructions.
L Do not open or mutilate the battery(ies).
Released electrolyte from the battery(ies) is
corrosive and may cause burns or injury to the
eyes or skin. The electrolyte may be toxic if
swallowed.
L Exercise care when handling the battery(ies).
Do not allow conductive materials such as
rings, bracelets or keys to touch the
battery(ies), otherwise a short circuit may
cause the battery(ies) and/or the conductive
material to overheat and cause burns.
L Charge the battery(ies) in accordance with the
information provided in these operating
instructions.
L Only use the included base unit (or charger) to
charge the battery(ies). Do not tamper with the
base unit (or charger). Failure to follow these
instructions may cause the battery(ies) to swell
or explode.
TCD210G(e-g).book Page 6 Friday, January 14, 2005 1:42 PM

Preparation
7
Controls and displays
Controls
Handset
A Speaker
B Charge contact
C {j /OK } (Menu/OK)
D {k} (Phonebook)
E {C} (Talk)
F Navigator key
L{e}{v} : To search for the desired item in
menus.
L{>} : To select the desired item or move the
cursor to the right.
L{<} : To return to the previous screen or
move the cursor to the left.
G {s} (Speakerphone)
H { R } (Recall)
I Receiver
J Display
K {R} (Redial/Pause)
L {ih} (Off/Power)
M { C/ T } (Clear/Mute)
N { INT } (Intercom)
O Microphone
Hinweis:
L Up to 3 menu items can be displayed at a time.
To select a menu item not shown on the current
page, scroll up or down by pressing the
navigator key,
{e} or {v} , respectively.
Base unit
A {x} (Page)
B Charge contact
Displays
Display icons
Various icons appear on the handset display to
indicate the current status of the unit.
C
s
h
T
i
N
a
N
O
C
E
F
G
H
DL
I
M
B
A
J
K
Display icon Meaning
w Within range of a base unit
L When flashing: Handset is
searching for base unit.
(out of range of base unit,
handset is not registered
to base unit, no power on
base unit)
L Handset is accessing base
unit. (intercom, paging,
changing base unit settings,
etc.)
k Handset is on an outside
call.
o Call bar is on. (Seite 20)
5 Battery strength
A
B
TCD210G(e-g).book Page 7 Friday, January 14, 2005 1:42 PM

Preparation
8
Connections
When the AC adaptor is connected, a short beep
will be heard. If it is not heard, check the
connections.
Wichtig:
L Use only the AC adaptor and telephone line
cord supplied with this unit.
Hinweis:
L After connection, you must charge the
batteries to make or answer calls (Seite 9).
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain connected at all
times. (It is normal for the adaptor to feel warm
during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-
mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
[VE] Voice enhancer is set to high
or low tone. (Seite 12)
[N] Night mode is on. (Seite 19)
[X] Key lock is on. (Seite 12)
[2] Handset number: The left
icon shows handset 2
example. (Seite 20)
-2- Base unit number: The left
icon shows base unit 2
example. (Seite 20)
F New SMS message
received (SMS users only;
Seite 31)
Line is being used by
another handset.
Display icon Meaning
(220–240 V, 50 Hz)
To telephone
network
Hooks
TCD210G(e-g).book Page 8 Friday, January 14, 2005 1:42 PM

Preparation
9
Battery installation
1 Insert the batteries negative ( T ) terminal
first.
2 Close the handset cover.
Hinweis:
L Use only rechargeable batteries (Seite 5).
Battery charge
Place the handset on the base unit for about 7
hours before initial use.
When charging, the battery icon is shown as
follows.
When the batteries are fully charged,
5
remains on the display.
Hinweis:
L It is normal for the handset to feel warm during
charging.
L It takes 7 hours to fully charge the batteries,
however, you can use the handset before the
batteries are fully charged.
L Clean the charge contacts (Seite 7) of the
handset and base unit with a soft, dry cloth
once a month, otherwise the batteries may not
charge properly. Clean more often if the unit is
exposed to grease, dust or high humidity.
Battery strength
Hinweis:
L When 7 flashes, recharge the handset
batteries.
7 will continue to flash until the
batteries have been charged for at least 15
minutes.
L If the handset is turned off, it will be turned on
automatically when it is placed on the base
unit.
Battery icon Battery strength
5 High
6 Medium
7 Low
When flashing: Needs to
be charged.
TCD210G(e-g).book Page 9 Friday, January 14, 2005 1:42 PM

Preparation
10
Battery life
After your Panasonic batteries are fully charged,
you can expect the following performance:
Ni-MH batteries (700 mAh)
Hinweis:
L Actual battery performance depends on a
combination of how often the handset is in use
(talking) and how often it is not in use
(standby).
L Battery operating time may be shortened over
time depending on usage conditions and
ambient temperature.
Battery replacement
If 7 flashes even after the handset batteries
have been charged for 7 hours, the batteries
must be replaced.
Wichtig:
L We recommend the use of Panasonic
rechargeable batteries noted on Seite 5. If you
install non-rechargeable batteries and start
charging, the batteries may leak electrolyte.
L Do not mix old and new batteries.
1 Press the notch on the handset cover firmly
and slide it in the direction of the arrow.
2 Remove the old batteries positive ( S )
terminal first and install the new ones. See
Seite 9 for battery installation.
Turning the power on/off
Power on
Press {ih} for about 1 second.
L The display will change to the standby mode.
Power off
Press {ih} for about 2 seconds.
L The display will go blank.
Setting the date and time
Wichtig:
L Confirm that the AC adaptor is connected.
L Ensure that w is not flashing.
1 Press {j /OK } .
2 Select “ Mobilteileinst. ” , then press
{>} .
3 Select “ Zeiteinstell. ” , then press {>} .
4 Select “ Datum/Uhr eing. ” , then press
{>} .
5 Enter the current day, month and year by
selecting 2 digits for each.
Beispiel: 17 May, 2005
Press
{ 1 }{ 7 } { 0 }{ 5 } { 0 }{ 5 } .
6 Enter the current hour and minute by
selecting 2 digits for each.
L You can select “ AM ” , “ PM ” or 24-hour time
entry by pressing
{*} repeatedly.
Beispiel: 3:30 PM
Press
{ 0 }{ 3 } { 3 }{ 0 } , then press {*}
repeatedly until
“ 03:30 PM ” is displayed.
7 Press {j /OK } .
8 Press {ih} .
Hinweis:
L To correct a digit, press {<} or {>} to move
the cursor, then make the correction.
L The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Operation Operating time
While in use (talking) 20 hours max.
While not in use
(standby)
170 hours max.
TCD210G(e-g).book Page 10 Friday, January 14, 2005 1:42 PM

Making/Answering Calls
11
Making calls
1 Lift the handset and dial the phone number.
L To correct a digit, press { C/ T } , then enter
the correct number.
2 Press {C} .
3 When finished talking, press {ih} or place
the handset on the base unit.
Speakerphone
The handset features a digital speakerphone,
which allows you to have hands-free
conversations.
1 During a conversation, press {s} to turn on
the speakerphone.
L Speak alternately with the caller.
2 When finished talking, press {ih} or place
the handset on the base unit.
Hinweis:
L For best performance, please note the
following:
– Use the speakerphone in a quiet
environment.
– If you or the other party have difficulty
hearing each other, press
{e} or {v}
repeatedly to adjust the speaker volume as
necessary.
L To switch back to the receiver, press {C} .
To adjust the receiver or speaker volume
Press {e} or {v} while talking. 4 volume levels
are available for the receiver. 6 levels are
available for the speaker.
Redial feature
Previously dialled phone numbers (each 24 digits
max.) can be redialled.
To redial the last number dialled
Press {R} , then press {C} or {s} .
L If {s} is pressed, the unit will redial
automatically if the other party’s line is
engaged.
Hinweis:
L You can also press {C} or {s} before
pressing
{R} .
To make a call using the redial list
The last 10 phone numbers dialled are stored in
the redial list.
1 Press {R} .
L The last number dialled will be displayed.
2 Press {e} or {v} repeatedly to select the
desired number.
L To exit the list, press {ih} .
3 Press {C} or {s} .
L If {s} is pressed, the unit will redial
automatically if the other party’s line is
engaged.
To redial automatically
If you press {s} when redialling and the other
party’s line is engaged, the unit will redial the
phone number again automatically. The unit will
redial up to 11 times. While the handset is waiting
to redial, {s} will flash. While the handset is
redialling, mute is automatically turned on.
Hinweis:
L Automatic redial is cancelled when any button
(except
{R} ) is pressed.
L If mute does not turn off after the line is
connected, press
{ C/ T } .
To edit a number in the redial list before
calling it
1 Press {R} .
2 Press {e} or {v} repeatedly to select the
desired number, then press
{j /OK } .
3 Select “ Bearb.&Anrufen ” , then press
{>} .
4 Press {<} or {>} to move the cursor, then
edit the number.
L Place the cursor on the number you wish
to erase, then press
{ C/ T } .
L Place the cursor to the right of where you
want to insert a number, then press the
appropriate dial key.
5 Press {C} or {s} .
To erase numbers in the redial list
1 Press {R} .
2 Press {e} or {v} repeatedly to select the
desired number, then press
{j /OK } .
TCD210G(e-g).book Page 11 Friday, January 14, 2005 1:42 PM

Making/Answering Calls
12
3 Select “ Löschen ” , then press {>} .
L If you want to erase all numbers in the list,
select
“ Alle löschen ” , then press {>} .
4 Select “ Ja ” , then press {>} .
5 Press {ih} .
To store a number from the redial list into the
phonebook
1 Press {R} .
2 Press {e} or {v} repeatedly to select the
desired number, then press
{j /OK } .
3 Select “ Telbuch hinzuf. ” , then press
{>} .
4 Enter a name (16 characters max.; see Seite
40 for character entry), then press
{j /OK } .
5 Edit the phone number if necessary, then
press
{j /OK } .
6 Select the desired category (Seite 14), then
press
{>} .
7 Select “ Speichern ” , then press {>} .
8 Press {ih} .
Other features
Voice enhancer
You can change the tone quality of the receiver
while you are on a call. 3 settings are available.
1 Press {j /OK } during a call.
2 Select the desired setting, then press {>} .
Hinweis:
L If you select “ Höhen ” or “ Tiefen ” , “ [VE] ” is
displayed.
Mute
You can mute your voice during a conversation.
While mute is turned on, you will be able to hear
the other party, but the other party will not be able
to hear you.
1 To mute your voice, press { C/ T } .
2 To return to the conversation, press { C/ T }
again.
Key lock
The handset can be locked so that no calls or
settings can be made. Incoming calls can be
answered, but all other functions are disabled
while key lock is on.
To turn key lock on, press
{j /OK } for about 2
seconds.
L “ [X] ” is displayed.
L To turn key lock off, press {j /OK } for about 2
seconds.
Hinweis:
L Calls to emergency numbers (Seite 24) cannot
be made until key lock is turned off.
L Key lock is turned off when the handset is
turned off.
R button (to use the recall feature)
{ R } is used to access special telephone services,
such as call waiting. If your telephone line
supports call waiting, you can press { R } to switch
between the first and second caller during a
conversation. Contact your service provider for
details.
Hinweis:
L If your unit is connected to a PBX (private
branch exchange), pressing
{ R } can allow you
to access certain features of your host PBX
such as transferring an extension call. Consult
your PBX dealer for details.
L You can change the recall time (Seite 24).
Pause button (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
Example: If you have to dial { 0 } before dialling
outside numbers manually, you will probably
pause after dialling
{ 0 } until you hear a dial tone.
1 Press { 0 } .
2 Press {R} .
3 Dial the phone number, then press {C} or
{s} .
Hinweis:
L Pressing {R} 1 time creates 1 pause. Press
{R} repeatedly to create longer pauses. To
change pause length, see Seite 24.
TCD210G(e-g).book Page 12 Friday, January 14, 2005 1:42 PM

Making/Answering Calls
13
Answering calls
1 Lift the handset and press {C} or {s} when
the unit rings.
L You can also answer a call by pressing any
dial key from
{ 0 } to { 9 } , {*} , { # } , or { INT } .
(Any key answer feature)
2 When finished talking, press {ih} or place
the handset on the base unit.
Auto talk feature
You can answer calls simply by lifting the handset
off the base unit. You do not need to press
{C} .
To turn this feature on, see Seite 20.
To adjust the ringer volume when an outside
call comes in
Press {e} or {v} when an outside call comes in.
Hinweis:
L The ringer volume cannot be adjusted if the
handset is on the base unit.
Other features
Handset locator
Using this feature, you can locate the handset if it
has been misplaced.
1 Press {x} on the base unit.
L The base unit will page the handset for
about 1 minute.
2 To stop paging, press {x} on the base unit
or press
{ih} on the handset.
TCD210G(e-g).book Page 13 Friday, January 14, 2005 1:42 PM

Phonebook
14
Using the phonebook
The phonebook allows you to make calls without
having to dial manually. You can add 200 names
and phone numbers to the phonebook, assign
each phonebook entry to the desired category,
and search for phonebook entries by name or
category.
Adding entries to the phonebook
1
Press {k} , then press {j /OK } .
2 Select “ Neuer Eintrag ” , then press {>} .
3 Enter the party’s name (16 characters max.;
see Seite 40 for character entry), then press
{j /OK } .
4 Enter the party’s phone number (24 digits
max.), then press
{j /OK } .
5 Select the desired category for the entry, then
press
{>} .
6 Select “ Speichern ” , then press {>} .
7 Press {ih} .
Hinweis:
L If there is no space to store new entries,
“ Speicher Voll ” will be displayed. Erase
unnecessary entries (Seite 15).
To edit/correct a mistake
Press {<} or {>} to place the cursor on the
number or character you wish to erase, then
press
{ C/ T } . Place the cursor to the right of
where you want to insert a number or character,
then press the appropriate dial key.
Hinweis:
L Press and hold { C/ T } to erase all numbers or
characters.
Categories
Categories can help you find entries in the
phonebook quickly and easily. When adding an
entry to the phonebook you can assign it to the
desired category. You can change the names of
categories assigned for phonebook entries
(“Friends”, “Family”, etc.) and then search for
phonebook entries by category. Additional
category features are available for Caller ID
subscribers (Seite 27).
Changing category names
1 Press {k} , then press {j /OK } .
2 Select “ Kategorie ” , then press {>} .
3 Select the category you want to change the
name of, then press
{>} .
4 Select “ Kategorie Name ” , then press
{>} .
5 Edit the name (10 characters max.; see Seite
40 for character entry), then press
{j /OK } .
6 Press {ih} .
Finding and calling a phonebook
entry
Phonebook entries can be searched for by first
character, by category, or by scrolling through all
phonebook entries.
Once you have found the desired entry, press
{C} or {s} to dial the phone number.
Scrolling through all entries
1 Press {k} .
2 Press {e} or {v} repeatedly to display the
desired entry.
Searching by first character (index search)
1 Press {k} , then press {R} .
2 Select “ Stichwort Suche ” , then press
{>} .
3 Select the character entry mode that
contains the character you are searching for,
and press
{>} .
4 Press the dial key ( { 0 } to { 9 } ) which contains
the character you are searching for (Seite
40).
L Press the same dial key repeatedly to
display the first entry corresponding to
each letter located on that dial key.
L If there is no entry corresponding to the
letter you selected, the next entry will be
displayed.
5 Press {e} or {v} repeatedly to scroll
through the phonebook if necessary.
Searching by category
1 Press {k} , then press {R} .
TCD210G(e-g).book Page 14 Friday, January 14, 2005 1:42 PM

Phonebook
15
2 Select “ Kategoriesuche ” , then press
{>} .
3 Select the category you want to search, then
press
{>} .
L The first entry in that category is
displayed.
L If you select “ Alle ” , the unit will end the
category search.
4 Press {e} or {v} repeatedly to scroll
through the phonebook if necessary.
Editing entries in the phonebook
Phonebook entries can be edited after you have
saved them. You can change the name, phone
number, and category.
Changing a name, phone number, category
1 Find the desired entry (Seite 14), then press
{j /OK } .
2 Select “ Editieren ” , then press {>} .
3 Edit the name if necessary (16 characters
max.; see Seite 40 for character entry), then
press
{j /OK } .
4 Edit the phone number if necessary (24
digits max.), then press
{j /OK } .
5 Select the desired category, then press {>} .
6 Select “ Speichern ” , then press {>} .
7 Press {ih} .
Erasing entries from the phonebook
Erasing an entry
1 Find the desired entry (Seite 14), then press
{j /OK } .
2 Select “ Löschen ” , then press {>} .
3 Select “ Ja ” , then press {>} .
4 Press {ih} .
Erasing all entries
1 Press {k} , then press {j /OK } .
2 Select “ Alle löschen ” , then press {>} .
3 Select “ Ja ” , then press {>} .
4 Select “ Ja ” again, then press {>} .
5 Press {ih} .
One touch dial
Assigning an entry in the phonebook to a one
touch dial key
Dial keys { 1 } to { 9 } can each be used as a one
touch dial key, allowing you to dial a number from
the phonebook by simply pressing a dial key.
1 Find the desired entry (Seite 14), then press
{j /OK } .
2 Select “ Kurzwahl ” , then press {>} .
3 Press {e} or {v} to select the desired dial
key number, then press
{>} .
L When the dial key is already used as a one
touch dial key,
“ @ ” is displayed next to the
dial key number. If you select this dial key,
“ Überschreiben ” is displayed. You can
overwrite the previous assignment if
necessary.
L If you do not wish to overwrite, select
“ Zurück ” .
4 Select “ Speichern ” , then press {>} .
5 Press {ih} .
Making a call using a one touch dial key
1 Press and hold the desired one touch dial
key (
{ 1 } to { 9 } ).
L You can view other one touch dial
assignments by pressing
{e} or {v} .
2 Press {C} or {s} .
Erasing a one touch dial assignment
1 Press and hold the desired one touch dial
key (
{ 1 } to { 9 } ).
2 Press {j /OK } , then press {>} .
3 Select “ Ja ” , then press {>} .
Hinweis:
L Only the one touch dial assignment is erased.
The corresponding phonebook entry is not
erased.
Chain dial
This feature allows you to dial phone numbers in
the phonebook while you are on a call. This
feature can be used, for example, to dial a calling
card access number or bank account PIN that
TCD210G(e-g).book Page 15 Friday, January 14, 2005 1:42 PM

Phonebook
16
you have stored in the phonebook, without
having to dial manually.
1 While on a call, press {k} .
2 Press {e} or {v} repeatedly to select the
desired entry.
L To search by first character (index search),
see Seite 14. To search by category, see
Seite 14.
3 Press {>} to dial the number.
Copying phonebook entries
to other handsets
Phonebook entries (Seite 14) can be copied from
the handset to the phonebook of a compatible
Panasonic handset.
Copying one entry
1
Find the desired entry (Seite 14), then press
{j /OK } .
2 Select “ Kopieren ” , then press {>} .
3 Enter the handset number you wish to send
the phonebook entry to.
4 To continue copying another entry, select
“ Ja ” , then press {>} . Find the desired entry,
then press
{>} .
L To finish copying, select “ Nein ” , then
press
{>} .
5 Press {ih} .
Copying all entries
1
Press {k} , then press {j /OK } .
2 Select “ Alle kopieren ” , then press {>} .
3 Enter the handset number you wish to send
the phonebook entries to.
L When all entries have been copied,
“ Abgeschlossen ” is displayed.
4 Press {ih} .
Hinweis:
L If the other handset (the receiver) is not in
standby mode,
“ Fehlgeschlagen ” is
displayed on your handset (the sender).
L If copying failed after copying at least 1 entry,
“ Unvollständig ” is displayed on your
handset (the sender).
TCD210G(e-g).book Page 16 Friday, January 14, 2005 1:42 PM

Handset Settings
17
Guide to handset settings
For your reference, a chart of all items which can be customised for the handset is printed below.
L When customising the handset, the current item or setting is indicated by > .
Hinweis:
L Up to 3 menu items can be displayed at a time. To select a menu item not shown on the current page,
scroll up or down by pressing the navigator key,
{e} or {v} , respectively.
Handset settings
menu
Sub-menu Sub-menu 2 Default setting Page
Zeiteinstell. Datum/Uhr eing. — Seite 10
Alarm Aus Seite 18
Ruftoneinstell. Ruflautstärke Maximum Seite 18
Rufsignal ext. Klingeltöne 1 Seite 18
Rufsignal int. Klingeltöne 1 Seite 18
Nachtmodus Start/Ende 23:00/06:00 Seite 19
Ein/Aus Aus Seite 19
Rufverzögerung 60 Sek Seite 19
Kateg. Auswähl. — Seite 19
Display-Einst. Display Anzeige Aus Seite 20
Auswahl Sprache Deutsch Seite 20
Kontrast Level 3 Seite 20
Rufoptionen Wahlsperre Aus Seite 20
Autom.Gespräch Aus Seite 20
Registrierung Mobilt.registr. — Seite 36
Auswahl Basis — Automatisch Seite 37
Andere Optionen Mobilteil-PIN 0000 Seite 21
LetterWise Deutsch Seite 21
Tastentöne Ein Seite 21
MT zurücksetzen — Seite 21
TCD210G(e-g).book Page 17 Friday, January 14, 2005 1:42 PM

Handset Settings
18
Time settings
Alarm
An alarm will sound for 3 minutes at the set time
once or daily. Set the date and time beforehand
(Seite 10).
1 Press {j /OK } .
2 Select “ Mobilteileinst. ” , then press
{>} .
3 Select “ Zeiteinstell. ” , then press {>} .
4 Select “ Alarm ” , then press {>} 2 times.
5 Select an alarm mode, then press {>} .
– “ Einmalig ” : The alarm will sound once
at the set time. Enter the desired day and
month by selecting 2 digits for each.
– “ TäglWiederholen ” : An alarm will
sound daily at the set time.
–
“ Aus ” : Turns the alarm off. Press {>}
again, then press
{ih} to finish.
6 Enter the desired hour and minute by
selecting 2 digits for each.
L You can select “ AM ” , “ PM ” or 24-hour time
entry by pressing
{*} repeatedly.
7 Press {j /OK } .
8 Select the ringtone that will sound at the set
time, then press
{>} .
9 Select “ Speichern ” , then press {>} .
10 Press {ih} .
Hinweis:
L To stop the alarm, press any dial key.
L When in talk or intercom mode, the alarm will
not sound until the call has ended.
L The alarm will sound at the set time even when
the ringer volume is turned off.
L If you select “ Einmalig ” , the setting will
change to
“ Aus ” after the alarm sounds.
Ringer setup
Ringer volume
1
Press {j /OK } .
2 Select “ Mobilteileinst. ” , then press
{>} .
3 Select “ Ruftoneinstell. ” , then press
{>} .
4 Select “ Ruflautstärke ” , then press {>} .
5 Press {e} or {v} repeatedly to select the
desired volume.
6 Press {>} .
7 Press {ih} .
Hinweis:
L Alarms will sound and the handset will ring for
intercom calls and when paged even if the
ringer is turned off.
Changing ringtones
You can change the ringtone used by the
handset.
“ Rufsignal ext. ” : Selects the ringtone for
outside calls.
“ Rufsignal int. ” : Selects the ringtone for
intercom calls.
1 Press {j /OK } .
2 Select “ Mobilteileinst. ” , then press
{>} .
3 Select “ Ruftoneinstell. ” , then press
{>} .
4 Select the desired item, then press {>} .
5 Select the desired ringtone, then press {>} .
6 Press {ih} .
Hinweis:
L If you select one of the melody ringtones, the
ringtone will continue to sound for several
seconds if the caller hangs up before you
answer. You may hear a dial tone or no one on
the line when you answer a call.
L The preset melodies in this product are used
with permission of © 2004 M-ZoNE Co., Ltd.
Night mode
Night mode allows you to select a block of time
during which the handset will not ring for outside
calls. This feature is useful for times when you do
not want to be disturbed, for example, while
TCD210G(e-g).book Page 18 Friday, January 14, 2005 1:42 PM

Handset Settings
19
sleeping. Night mode can be set independently
for the handset and the base unit (Seite 23).
Using the phonebook’s category feature (Seite
14), you can also select categories of callers
whose calls will override night mode and ring the
handset (Caller ID subscribers only).
Set the date and time beforehand (Seite 10).
Setting the start and end time for night mode
1 Press {j /OK } .
2 Select “ Mobilteileinst. ” , then press
{>} .
3 Select “ Ruftoneinstell. ” , then press
{>} .
4 Select “ Nachtmodus ” , then press {>} .
5 Select “ Start/Ende ” , then press {>} .
6 Enter the desired hour and minute you wish
to start this feature by selecting 2 digits for
each.
L If you use 12-hour time entry, select “ AM ”
or
“ PM ” by pressing {*} repeatedly
before entering the time.
7 Enter the desired hour and minute you wish
to end this feature by selecting 2 digits for
each.
L If you use 12-hour time entry, select “ AM ”
or
“ PM ” by pressing {*} repeatedly
before entering the time.
8 Press {j /OK } .
9 Press {ih} .
Turning night mode on/off
1 Press {j /OK } .
2 Select “ Mobilteileinst. ” , then press
{>} .
3 Select “ Ruftoneinstell. ” , then press
{>} .
4 Select “ Nachtmodus ” , then press {>} .
5 Select “ Ein/Aus ” , then press {>} .
6 Select “ Ein ” or “ Aus ” , then press {>} .
7 Press {ih} .
Hinweis:
L When the night mode is turned on, “ [N] ” is
displayed.
Setting the ring delay for night mode
This setting allows the handset to ring during
night mode if the caller waits long enough. After
the selected amount of time passes, the handset
will ring, useful when someone urgently needs to
speak with you. If you select “ Kein
Rufsignal
” , the handset will not ring during
night mode.
1 Press {j /OK } .
2 Select “ Mobilteileinst. ” , then press
{>} .
3 Select “ Ruftoneinstell. ” , then press
{>} .
4 Select “ Nachtmodus ” , then press {>} .
5 Select “ Rufverzögerung ” , then press
{>} .
6 Select the desired setting, then press {>} .
7 Press {ih} .
Selecting categories to bypass night mode
1 Press {j /OK } .
2 Select “ Mobilteileinst. ” , then press
{>} .
3 Select “ Ruftoneinstell. ” , then press
{>} .
4 Select “ Nachtmodus ” , then press {>} .
5 Select “ Kateg. Auswähl. ” , then press
{>} .
6 Press the desired category numbers, then
press
{j /OK } .
L The selected category number will flash.
L To cancel a selected category number,
press the number again. The number will
stop flashing.
7 Press {ih} .
Hinweis:
L If a call is received from one of the categories
set to bypass night mode, only the handset will
ring.
TCD210G(e-g).book Page 19 Friday, January 14, 2005 1:42 PM

Handset Settings
20
Display setup
Selecting the standby mode display
“ Basis Kennung ” : The current base unit
number is displayed.
“ Mobilt.-Nr. ” : The current handset number is
displayed.
“ Aus ” : Only the current date and time are
displayed.
1 Press {j /OK } .
2 Select “ Mobilteileinst. ” , then press
{>} .
3 Select “ Display-Einst. ” , then press
{>} .
4 Select “ Display Anzeige ” , then press
{>} .
5 Select the desired setting, then press {>} .
6 Press {ih} .
Hinweis:
L If “ Basis Kennung ” is selected and the
current base unit number is 2,
“ -2- ” is
displayed.
L If “ Mobilt.-Nr. ” is selected and the current
handset number is 2,
“ [2] ” is displayed.
Changing the display language
1
Press {j /OK } .
2 Select “ Mobilteileinst. ” , then press
{>} .
3 Select “ Display-Einst. ” , then press
{>} .
4 Select “ Auswahl Sprache ” , then press
{>} .
5 Select the desired language, then press {>} .
6 Press {ih} .
Hinweis:
L If you select a language you cannot read,
press
{ih} , {j /OK } , press {e} 2 times,
press
{>} , press {v} 2 times, press {>} ,
press
{v} , press {>} , select the desired
language, then press
{>} . Press {ih} .
Changing the display contrast
1
Press {j /OK } .
2 Select “ Mobilteileinst. ” , then press
{>} .
3 Select “ Display-Einst. ” , then press
{>} .
4 Select “ Kontrast ” , then press {>} .
5 Press {e} or {v} repeatedly to select the
desired contrast, then press
{>} .
6 Press {ih} .
Call options
Turning call bar on/off
This feature prohibits making outside calls. When
call bar is turned on, only intercom calls and calls
to emergency numbers (Seite 24) can be made.
1 Press {j /OK } .
2 Select “ Mobilteileinst. ” , then press
{>} .
3 Select “ Rufoptionen ” , then press {>} .
4 Select “ Wahlsperre ” , then press {>} .
5 Enter “ 0000 ” (default handset PIN).
L If you changed the PIN, enter it (Seite 21).
6 Select “ Ein ” or “ Aus ” , then press {>} .
7 Press {ih} .
Hinweis:
L When call bar is turned on, o is displayed.
Turning auto talk on/off
When this feature is turned on, you can answer
calls simply by lifting the handset off the base
unit. You do not need to press {C} .
1 Press {j /OK } .
2 Select “ Mobilteileinst. ” , then press
{>} .
3 Select “ Rufoptionen ” , then press {>} .
4 Select “ Autom.Gespräch ” , then press
{>} .
5 Select “ Ein ” or “ Aus ” , then press {>} .
6 Press {ih} .
TCD210G(e-g).book Page 20 Friday, January 14, 2005 1:42 PM