Panasonic TY-CC10W User manual

© Panasonic Corporation 2010.
Unauthorized copying and distribution is a violation
of law.
Order Number. ITD1005031CE
Communication Camera
Model No. TY-CC10W
TABLE OF CONTENTS
PAGE PAGE
1 Specifications ----------------------------------------------------- 2
2 Troubleshooting Guide ----------------------------------------- 2
2.1. How to diagnose the VIERA Communication
Camera------------------------------------------------------- 2
2.2. Preparation for diagnosis -------------------------------- 2
3 Exploded View and Replacement Parts List ------------ 3

2
1 Specifications
2 Troubleshooting Guide
2.1. How to diagnose the VIERA Communication Camera
You can carry out functional checks and diagnosis of the images (H.264) of the VIERA Communication camera (TY-CC10W) on a
PC by using exclusive diagnosis software.
2.2. Preparation for diagnosis
The following items are necessary for diagnosing the camera.
*Download the Diagnosis Software and Document from here.
Power Supply DC 5 V (Supplied from the television)
Power Consumption Max. 1.4 W
Dimensions (W ×H ×D) 8.27” (210 mm) ×3” (76 mm) ×1.7” (43 mm)
Weight (Mass) Approx. 200 g (Approx. 0.44 lbs.) (Including USB cable)
Operating temperature Range 32 °F- 104 °F (0 °C - 40 °C)
Lens F/2.0 3P Lens; FOV (D) 56.8 degree(in HD mode)
Microphone 4 unidirectional microphones
Sensor 1/4 inch CMOS sensor
Resolution 1,280 ×720
Output Image HD, WVGA, VGA, CIF
Output Format H.264, YUV
Max. Frame Rate 22 fps at HD, 30 fps at VGA
Interface USB 2.0 High Speed
Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.
PC [interface:USB 2.0]
[OS:Windows XP / Vista / 7]
Diagnosis software * [QTCam (QTCamFullSetup_20100615.exe)]
Camera to be checked [VIERA Communication Camera (TY-CC10W)]

3
3 Exploded View and Replacement Parts List
Please click the radio button for “Diagrams ll / Parts List” on the menu bar.

Model No. : TY-CC10W Exploded View

Model No. : TY-CC10W Parts List
Safety
Ref.
No. Part No. Part Name & Description Q'ty Remarks
1 N5ZZ00000193 COMMUNICATION CAMERA UNIT 1
2 TQZJ267-2 OPERATION INSTRUCTION 1
3 TPCC80101C CARTON BOX 1
4 TPDF2514 PARTITION (WHITE) 1

1
1 Troubleshooting Guide
1.1. How to diagnose the VIERA Communication Camera
You can carry out functional checks and diagnosis of the images (H.264) of the VIERA Communication camera (TY-CC10W) on a
PC by using exclusive diagnosis software.
1.2. Preparation for diagnosis
The following items are necessary for diagnosing the camera.
1.3. Diagnosis software setup and camera inspection
(For details, refer to Chap.2.)
1. Install diagnosis software (QTCam) on the PC.
2. Start the QTCam that you installed.
3. Insert the UBS cable of the camera (TY-CC10W) into the USB port on the PC.
4. Set the image (H.264) output of diagnosis software and check the image output on the camera.
Check real-time images of the camera.
(For the setup method, etc., refer to Chap.2.)
5. Set the audio output of the diagnosis software and check the audio output on the camera.
Check the output by talking into each of the four camera microphones and capturing the audio from each microphone.
(For the setup method, etc., refer to Chap.2.)
PC [Interface: USB 2.0]
[OS: Windows XP / Vista / 7]
Diagnosis software * [QTCam (QTCamFullSetup_20100615.exe)]
Camera to be checked [VIERA Communication Camera (TY-CC10W)]

2
1.4. Diagnosis procedures
When experiencing image or audio problems on the VIERA Communication Camera (TY-CC10W), inspect the camera by checking
the camera’s image and audio output by using diagnosis software and follow the flowchart below for making a diagnosis.

3
2 Method of Using the VIERA Communication Camera Test-
ing Software (QTCam)
2.1. VIERA Communication Camera Testing Software (QTCam)
2.1.1. What is QTCam?
QTCam is a testing program for VIERA Communication Cameras (TY-CC10W).
Using it allows confirmation of video (H.264) and audio operation of the camera on PCs without the need to connect to a television.
We will explain here the means of installing the program, its settings and testing methods.
2.1.2. Operating Environment
[Hardware]
1. VIERA Communication Camera (TY-CC10W)
2. Personal computer (USB 2.0 interface)
[Software]
1. Compatible OS: Windows XP / Vista / Windows 7
2. Installation software: QTCamFullSetup_20100615.exe

4
2.2. VIERA Communication Camera Testing Software (QTCam) Installation
Procedure
2.2.1. Installation Procedure
(1) Copy the downloaded installation software
[QTCamFullSetup_20100615.exe] to the personal computer
where you will do the testing and run it.
(double-click on [QTCamFullSetup_20100615.exe])
(2) Activate QTCam Setup: Installation Options and select the
software you wish to install.
Select [FFDShow Codec].
(FFDShow is required to play H.264 videos)
(3) Click [Next].
(4) Specify the folder to install the program in and click [Install].
(You do not have to change the folder)
Installation will begin.
(5) Installation begins.
Installation of FFDShow occurs next.

5
(6) Click [Next] in the [Setup-ffdshow] window that is displayed.
(7) Click [Next] after the ffdshow [Information] window is dis-
played.
(8) Specify the folder to install the program in and click [Next].
(You do not have to change the folder)

6
(9) There is no need to change any check marks in this window
[Select Components].
Simply click [Next].
(10) Specify the start menu folder.
(You do not have to change the folder)
Click [Next].
(11) The [Additional Task] selection window is displayed.
There is no need to change any check marks.
Simply click [Next].

7
(12) The [Speaker Setup] selection window is displayed.
Select [2.0 (stereo)].
(13) Click [Next].
(14) Click [Install].
Installation will begin.
• The installation window

8
(15) After the installation is completed, the [Completing ........]
window is displayed.
There is no need to place any check marks.
Simply click [Finish].
(16) Once [Completed] is displayed the installation is ended.
Click [Close] to close the window.
• A QTCam icon will be created at the desktop of the personal
computer.
• FFDShow and QTCam are installed in the computer.

9
2.3. VIERA Communication Camera Testing Software (QTCam) Settings and
Testing Procedures
2.3.1. Connecting the VIERA Communication Camera
(1) Activate the QTCam program by double-clicking on the
shortcut icon.
“QTCam” window will open in your personal computer.
(2) Connect the VIERA Communication Camera (TY-CC10W)
you wish to test into your computer's USB slot.
(3) Click [Devices]. If [TY-CC10] is displayed, the camera has
been recognized.
If TY-CC10 is not displayed:
• Disconnect and connect the camera into the USB slot and
check whether the computer recognizes it.
• If [TY-CC10] does not appear after several attempts at
reconnecting the camera, the camera itself may be at fault.

10
2.3.2. Generating VIERA Communication Camera Video and Making Settings
(1) Displaying camera video
Click [Device] and select [USB Video Device].
(2) Video is displayed in the default setting (YUY2, 640 x 480).
VIERA Communication Camera is performed in H.264, so
alter the video format setting as follows.
(3) Alter the video format setting to display video in H.264.
Select [Video format] from [Options].

11
(4) Alter the format from YUY2 to H.264.
(5) For H.264, ensure the settings are:
Resolution: 1280 x 720
Bit Rate: 4Mbps
Frame Rate: 22 fps
Then click [OK].
(6) Video is displayed in H.264 (1280 x 720, 22 fps).
Check that the video is playing successfully.
[Key Points Concerning the Video Display]
• Ten to twenty seconds may be required when switching vid-
eos in H.264 (depending on the performance of the com-
puter)
• The time required for H.264 encoding can cause a slight
time lag with moving pictures.
• Phenomena such as frame skipping may occur according
to the processing capacity of the computer.
Change the resolution and check once again.

12
2.3.3. Generating Audio Output for the VIERA Communication Camera
(1) Perform the audio setting.
Select [TY-CC10] from [Device].
Check the computer audio device setting
Prior to performing the audio setting, check that the
specified device in [Control panel] - [Audio devices] -
[Audio] - [Recording] is the [TY-CC10].
(2) Generate audio.
Select [Capture Audio] from [Capture].
Audio from the four microphones of the camera can be out-
put on the computer. Input the audio from each microphone
and check audio is generated.

13
2.3.4. Changing the Volume
(1) Select [Audio Capture Filter] from [Options].
(2) The properties of the audio input mixer are displayed.
(3) Alter the pin line input mix (P) to adjust to the desired vol-
ume.
If no audio can be heard
Check whether the computer's audio device settings
(volume level, muting, etc.) are correct using the Control
Panel.

14
2.3.5. Method of Testing the Video (H.264) and Audio of the VIERA Communication Cam-
era
2.4. Closing the VIERA Communication Camera Testing Program (QTCam)
2.4.1. Method of Closing QTCam
*When closing QTCam, the set video format will be stored in the memory.
The H.264 settings will be retained for playback in H.264 when QTCam is activated the next time.
(1) Close the QTCam window.
Select [Exit] from [File], or simply click the highlighted red
cross on the window.
(2) After closing QTCam, disconnect the camera USB cable.

2
1
2
1
01
02
TY-CC10W How to assemble carton box.
01〜13 Make crease before assembling.
14〜25 Assemble the box.