Panasonic CWFE14ECM User manual

To the store/contractor:
Please give these instructions to the client after installation.
JH-56P-E
Version 1601
Owner's Manual
What you must do
What you may not do
Indicates a risk of death or
severe injuries.
Indicates a risk of minor injuries
or damage to property.
■
Each of these explains what harm and damage may be
incurred by incorrect use.
■
The following symbols explain what you may and may not do.
(The following are examples of these symbols)
This section explains the precautions to take in order to prevent injuries to people or damage to property.
WARNING
CAUTION
Wall Mount Clothes Drying System
Model No. CWFE14ECM
WARNING
Do not
disassemble
Forbidden
Make sure
to observe
This may cause the unit
to fail or fall and result
in personal injury or
property damage.
•No one is allowed
to disassemble,
repair,
or modify this
product, except
repair engineers. It may cause a fire.
•Do not dry laundry
by placing a heater
or any other heat
source near or
beneath this product.
The pull cord can be a hazard to children.
Keep the pull cord out of the reach of children and
prevent children from climbing on furniture to reach
the pull cord.
•Special attention should be paid when
handling the pull cord.
Thank you for purchasing the Wall Mount Clothes Drying System.
■
Please read this Owner's manual carefully and make sure you use this
indoor Drying Rack in a proper and safe manner.
■
Please make sure that you read the "Safety Precautions" before use.
■
Please make sure that information such as "delivery date/store name" is
filled out in the warranty section. Keep it together with these instructions.
■
This product is intended for indoor use in residential households.
■
Please refrain from using this product outdoors or in areas such as the
bathroom where the product may come into contact with water.
Please follow these instructions
Safety Precautions
■Installation work of this product should not be done by yourself. The work
should be done by a construction company. (Improper installation may
cause injury due to falling.)

• Do not let children hang on or play with
any part of the product.
• Do not use other rods other than the
designated one.
• Do not hang objects on the arm
components.
This may cause the product to
break or fall and result in product failure,
personal injury or property damage.
This may cause the product to
break or fall and result in product failure,
personal injury or property damage.
This may cause the
product to break or fall
and result in product
failure, personal injury
or property damage.
This may result in product
failure, personal injury or
property damage.
• Do not lean on the rod.
• Be sure to put the rod away when not
in use. Make sure the rod is in contracted
position prior to being stowed away.
• Do not hang items over the weight of 8kg
on the rod. Also, do not apply
excessive force
on the rod or any
part of the product.
If you do not stow the rod away it may cause
injuries due to collision.
Forbidden
Forbidden
Make sure
to observe
• Do not push, pull or put the the rod away
by hand.
This may cause the rod to
break or fall and result in
product failure, personal
injury or property damage.
• Always stand to the side of the rack
and use caution when
lowering the rod.
Standing in front of the unit
may cause the rod to be
lowered onto your head and
cause personal injury.
A drop may cause
injuries or damage.
CAUTION
Rod
Lid
Names of each part
Metal bracket for attaching
drop prevention metal part
Metal bracket for attaching
drop prevention metal part
Rack
Arm component
Operation ball
Pull cord
Rod supporter
Rod cap
2

● Pleaseavoid
putting a load on
just a part of the
rod. This may
cause damages.
■
Estimated amount of laundry of a family of 4
Socks
Underwear
: 4 pcs
: 4 pcs
● Spin-drythelaundryadequatelyandhangitevenlyontherack.
(Note: Ensure laundry is not touching the wall or curtains.)
● Pleasemakesurethatyouusetherodatthelowestposition
(the position where the rod is fully pulled out).
(Note: Do not tie or fix the pull cord while in use.)
How to pull out the rod
Pull out the rod by pulling the pull cord on the end with the
operation ball (the operation ball part) until it stops.
* Note: Laundry after spin drying weighs around 1.3 to 1.5 more than dry
laundry.
● Pleasedonothang
laundry weighing
8kg or more (after
spin-dry)
: 3 pcs
: 2 pcs
: 1 pc
Sweaters
T-shirts
Casual shirt
: 2 pcs
: 2 pcs
: 2 pcs
Cotton pants
Bath towels
Towels
Operation
ball
Ensure extension rod is fully contracted before storing the rod
and closing the lid.
To put away the rod, pull the other end of the pull cord and
confirm the lid of the rack closes.
(Itcloseseasierwhenit’spulledquickly)
Please put away both
ends of the rod first.
The rod may collide
with the rack and cause
damages.
How to put away the rod
(Please make sure
that laundry is
spread evenly)
(This may cause
damage.)
()
+RZWRH[WHQGDQGFRQWUDFWWKHURG
3XOORXWWRH[WHQGWKHURG
 DQGSXVKLQWKHURGWRFRQWUDFW
7LJKWHQURGFDSZKHQ
 LQWKHGHVLUHGSRVLWLRQ
5RG
5RGVXSSRUW
7XUQWRORRVHQURGFDS
2.
How to hang laundry
1. How to pull out and put away the rod
Instructions for use
About indoor
ventilation
● Pleaseventilatetherooms(e.g.:ventilationfan,dehumidifieretc.),aslaundryemits
humidity. Humidity may cause condensation, or damage to some clothes.
3
CAUTION
CAUTION
(Approximately 6kg after spin-dry)

If the rack and/or the rod gets dirty...
Care
In case of malfunction
Situation Possible causes Solution
The rod does not
come out.
The rod cannot be
put away.
Itmakesasqueaky
sound.
Are you pulling the wrong end of
the pull cord? Please pull the other end.
Please try to lift up the lid by hand once.
When you restart using this after a
long time, it may not be as easy to
open it as usual.
The arm joints are rubbing against
each other.
Please apply something like lubricating oil
(silicon type) on the arm joints (figure).
It may cause damage
to any resin parts.
Please do not use machine oil or anything similar.
(
(
Silicon type
How to install the rod
5RG
5RGVXSSRUW
$UPFRPSRQHQW
How to pull out the rod
Hold the arm component,
lift up the rod, and loosen it.
About the rod
Hold the arm component and place the rod on the rod support.
● Wipecleanwithadampclothandasolutionofmilddetergent,thenremove
all moisture with a dry cloth.
* Do not clean with benzine or thinners, etc.
(It may cause deformation or fading.)
4
● Ifitcomesintocontactwithchemicals,pleaseremovethemimmediately.
Depending on the type of chemical and the length of exposure, color fading
may occur.
Ensure rod is fully contracted before storing it away.
PRINTED IN JAPAN
I0116-0