Panasonic CXDVP292U - CAR DVD PLAYER User manual

ORDERNO.ACED020381C7
C9
AUTOMOTIVE CONSUMERELECTRONICS
CX-DVP292U
MobileDVD-Video Player with 96 kHz24 bitD/AConverter
SPECIFICATIONS
Specifications*
General
Power Supply DC 12V (10.8V - 16V),
Test Voltage14.4V
NegativeGround
Current Consumption Less than2.0A
Signal system NTSC 1.0Vp-p75 RCApinjack
Discs played
(1) DVD-VIDEO disc 5”(12cm)single-sided, single-layer
5”(12cm)single-sided, double-layer
5”(12cm)double-sided, single-layer
5”(12cm)double-sided, double-layer
3”(8cm)single-sided, single-layer
3”(8cm)single-sided, double-layer
3”(8cm)double-sided, single-layer
3”(8cm)double-sided, double-layer
(2) Compact disc / (CD-
DA, VIDEO CD, CD-
ROM, CR-R, CD-RW)
5”(12cm)disc
3”(8cm)disc
Audiooutput level 600 (2ch2.5Vrms Max.)
Audiosignal output characteristics
(1) Frequencyresponse 20Hz-20kHz
(2) S/N ratio 95dB (IHF-A)
(3) Wowand Flutter Belowmeasurablelimits
1

Digital audiooutput
Disc Sound recording format
DVD DolbyDigital
DTS
Linear PCM / (48 kHz 16/20/24 bit)
VideoCD MPEG1
Linear PCM
CD Linear PCM
DTS
MP3 MP3
Disc Optical digital audiooutput from
connector
DVD DolbyDigital bitstream (1-5.1ch)
DTS bitstream (1-5.1ch) / (Theanalog
portion isnot output.)
Linear PCM (2ch) / (48 kHz sampling/16
bit only)
VideoCD MPEG1bitstream
Linear PCM (2ch) / (44.1kHz sampling/
16 bit)
CD Linear PCM (2ch) / (44.1kHz sampling/
16bit)
DTS bitstream (1-5.1ch) / (Theanalog
portion isnot output.)
MP3 Linear PCM (2ch) / (32 kHz/ 44.1kHz/ 48
kHz sampling/16 bit)
Dimensions** (W× H ×
D) 178 × 50 × 155 (mm)
Weight** 1.5kg
*Specificationsand thedesign are subject topossible
modification without notice duetoimprovements.
** Dimensionsand Weight shownare approximate.
** AbovespecificationscomplywithEIAstandards.
2002 Matsushita Communication Industrial Co., Ltd. All rights
reserved. Unauthorized copying and distribution isaviolation of
law.
2

1. FEATURES
-Digital audiooutput terminal for upgrading to DolbyDigital and dts
surround [Requires separatelysoldoptical cable(CA-LRD60) and
digital surround processor (CY-AC300)].
-L/Rstereo analog audiooutputs (RCA)for connection to existing
head unitaux inputs.Video output iscomposite video (RCA).
-Supplied remote handles multi-function software (multi-language
audio-track/ subtitle, multi-angle, multi-story, etc.), plus all basic
functions.
2. REPLACEING THE FUSE
Use fuses of the same specifiedrating 5 amps. Using different substitutes orfuses withhigher
ratings, orconnecting the unit directlywithout a fuse, couldcause fire ordamage tothe stereo
unit.
3. MAINTENANCE
Yourproducts is designedand manufacturedtoensure a minimumof maintenance. Use a soft
clothforroutine exteriorcleaning. Neveruse benzine, thinnerorothersolvent.
4. DVD DECK ALIGNMENT
This model has no servoalignment points because microcomputercontrols the servocircuit
5. LASER PRODUCTS
3

6. DIMENSIONS
7. WIRING CONNECTION
4

8. TERMINALS DESCRIPTION
5

8.1. MainBlock
IC601 : C2DBKJ000084
Pin
No. Name Description I/OVol.
/
(V)
1 PLL COM
(NC) - - -
2 PLL CLK
(NC) - - -
3 DVD RX
(MI) DVD deck CPU BUS data input I 5.0
4 DVD TX
(MO) DVD deck CPU BUS data output O5.1
5 PLL CE
(NC) - - -
6 EVDD +5V powersupply - 5.1
7 EVSS GND - 0
8 DISC ILL DISC insert illumination
control signal O 0
9 EJECTILL
(NC) - - -
10 REM IN Remote controllerdata
input I5.0
11 SECURITY
LED (NC) - - -
12 LCD
DATA (NC) - - -
13 LCD COM
(NC) - - -
14 LCD CLK
(NC) - - -
15 LCD CE
(NC) - - -
16 INV CONT
(NC) - - -
17 DIMMER2
(NC) - - -
18 VPP High voltage forprogram - 0
19 DIMMER1
(NC) - - -
20 DVD CONT DVD deck powercontrol
signal O5.1
21 MAIN
CONT Mainpowercontrol signal O 5.1
22 CHC 1/2
(NC) - - -
6

Pin
No. Name Description I/OVol.
/
(V)
23 ANT
CONT(NC) - - -
24 AMP
CONT(NC) - - -
25 VIDEO
CONT Videocontrol request signal O5.1
26 BEEP (NC) - - -
27 ILL CONT
(NC) - - -
28 DVD
HRESET DVD deck reset O 5.1
29 DVD
SLEEP DVD deck standbysignal O 5.1
30 NC - - -
31 RESET Systemreset I 4.9
32 SUB X1 (Connecting toGND) I 0
33 SUB X2
(NC) - - -
34 REGC Connection pinforreg.
capacitor -3.5
35 X2 Mainsystemclock
oscillator(16.777MHz) I1.6
36 X1 Mainsystemclock
oscillator(16.777MHz) O1.4
37 VSS GND - 0
38 VDD +5V powersupply - 5.1
39 CLK OUT
(NC) - - -
40 AFMUTE F AFmute signal (Front) O 5.0
41 AFMUTE
R (NC) - - -
42 AFMUTE
W (NC) - - -
43 RSE
MUTE (NC) - - -
44 DB MUTE
(NC) - - -
45 DVD
CONT1.8
(NC)
- - -
46 DVD
CONT2.7
(NC)
- - -
7

Pin
No. Name Description I/OVol.
/
(V)
47 DVD
CONT3.3
(NC)
- - -
48 NC - - -
49 NC - - -
50 VIDEO
SEL2 (NC) - - -
51 VIDEO
SEL1 Videoselect request signal O 0
52 DB ON/
OFF (NC) - - -
53 LPFSEL
(NC) - - -
54 MUTE (NC) - - -
55 BVDD +5V powersupply - 5.1
56 BVSS GND - 0
57 DAC DZF
(NC) - - -
58 DAC CS D/A converterchipselect O 5.0
59 DAC CDTI D/A converterserial data
output O 0
60 DAC CCLK D/A converterserial clock O 5.0
61 DAC PD D/A converterreset
control signal O5.0
62 I2C
DATA1
(NC)
- - -
63 I2C
DATA2
(NC)
- - -
64 I2C CLK
(NC) - - -
65 LEVEL
CONT1 Audiolevel control 1 signal O 0
66 LEVEL
CONT2 Audiolevel control 2 signal O5.2
67 NC - - -
68 DIVER
CNT(NC) - - -
69 TUNER
MODE
(NC)
- - -
70 IFSEL
(NC) - - -
8

Pin
No. Name Description I/OVol.
/
(V)
71 AVDD +5V powersupplyforA/D
converter -5.2
72 AVSS GND forA/D converter - 0
73 AVREF REFvoltage forA/D
converter I5.2
74 SD Not used(Connecting to
GND) - 0
75 INITA Initial setting select A I 5.0
76 INITB Initial setting select B I 0
77 INITC Initial setting select C I 0
78 PANEL
SENS Not used(Connecting to GND) - 0
79 SIDE
BRAKE
SENS
Parking brake detection
signal I 0
80 STEREO Not used(Connecting to
GND) - 0
81 ACC SEN Accessorypower
detection signal I5.1
82 PNLOP/CL Not used(Connecting to
GND) - 0
83 EXTMUTE Not used(Connecting to
GND) - 0
84 ILL SENS Not used(Connecting to
GND) - 0
85 CHG SENS Not used(Connecting to
GND) - 0
86 CH REM
DATA (NC) - - -
87 CH STB
(NC) - - -
88 RDS CLK
(NC) - - -
89 RDS
DATA (NC) - - -
90 BATT SEN Batterypowerdetection
signal I5.1
91 EP CS
(NC) - - -
92 DOLBY
REQ (NC) - - -
93 DVD
EJECT DVD eject detection signal I5.4
9

Pin
No. Name Description I/OVol.
/
(V)
94 CH DATA
(NC) - - -
95 NC - - -
96 CH CLK
(NC) - - -
97 EP SI (MI) O 0
98 EP SO
(MO) O 0
99 EP CLK
(NC) - - -
100 PLL DATA
(NC) - - -
8.2. DVDServo Block
IC301 : MN102H60GAC
Pin
No. Port Description I/O (V)
1 WAITODC CPU Bus Control I 3.4
2 NRE CPU Bus Control O 0
3NWEL CPU Bus Control O 3.2
4 (NC) - - -
5NCSEXTROMFlashROM Chip
Select O 1.4
6 NSRAMCS SRAM ChipSelect O 2.6
7 NCS ODC ChipSelect O 3.3
8 NMPEGCS MPEG DecoderChip
Select O 3.4
9 NMPEGRST MPEG DecoderReset O 3.4
10 NCSDAC DAC ChipSelect O 3.4
11 (NC) - - -
12 P57/
XWORD LowFix I 0
13 A0 CPU Address Bus O 0.7
14 A1 CPU Address Bus O 1.5
15 A2 CPU Address Bus O 1.7
16 A3 CPU Address Bus O 1.8
17 33VDD +3.3V PowerSupply O 3.4
18 (NC) - - -
19 VSS GND - 0
20 XI/PS1 Self Test Mode I 3.3
21 (NC) - - -
22 33VDD +3.3V PowerSupply - 3.4
10

Pin
No. Port Description I/O (V)
23 OSCI Clock I 0
24 (NC) - - -
25 MODE Mode Selector I 0
26 A4 CPU Address Bus O 1.6
27 A5 CPU Address Bus O 2.3
28 A6 CPU Address Bus O 0.7
29 A7 CPU Address Bus O 2.6
30 A8 CPU Address Bus O 0.9
31 A9 CPU Address Bus O 2.4
32 A10 CPU Address Bus O 0.7
33 A11 CPU Address Bus O 2.4
34 33VDD +3.3V powerSupply - 3.4
35 A12 CPU Address Bus O 0.9
36 A13 CPU Address Bus O 0.9
37 A14 CPU Address Bus O 0.8
38 A15 CPU Address Bus O 0.6
39 A16 CPU Address Bus O 0.6
40 A17 CPU Address Bus O 0
41 A18 Reserve forDVD3.5
/ CPU Address Bus O0.4
42 A19 Reserve forDVD3.6 /
CPU Address Bus O2.4
43 VREFN VREFN - 0
44 INNERSW InnerSwitch I 3.3
45 LOADING Loading Driver
Command Value O1.7
46 P0 (OUTR) PhotoSW O 0
47 S4
(XFEPRST) FEP Reset O 3.3
48 NGENCS Serial Bus Chip
Select Clock
Generator
O3.0
49 NCE2SRAM SRAM Standby
Control O3.0
50 CKIO MPEG DecoderCKIO O 0
51 SI DATA Serial Bus SI Data I 2.9
52 SO DATA Serial Bus SO Data O 3.2
53 GENCK Serial I/FClock
GeneratorSCK O 3.0
54 VREFP VREFP - 3.4
55 STANDBY MotorDriverMute O 3.2
56 GENDATA Serial I/FClock
GeneratorSO O 3.0
57 ODCSEL ODC IFSelect O 3.3
11

Pin
No. Port Description I/O (V)
58 DMUTE AudioMute (H: ON, L
: OFF) O 0
59 LODSWON PhotoEnable O 0
60 LODSW LOADING SW I 3.4
61 VSS GND - 0
62 P2 (IN-C) PhotoSW (H: Close) I 0
63 P1 (IN-R) PhotoSW (H: Close) I 0
64 P3 (IN-L) PhotoSW (H: Close) I 0
65 P4 (OUT-L) PhotoSW (H: Close) I 0.7
66 33VDD +3.3V PowerSupply - 3.4
67 (NC) - - -
68 S3
(XFEPCS) FEP Serial Bus Chip Select O 3.4
69 (NC) - - -
70 S0 (SCK) FEP, DAC Serial
Interface O 3.4
71 (NC) - - -
72 S1 (SO) ADSC FEP EEPROM
Serial Interface O 3.4
73 PLL UP0 Pull-up I 3.3
74 PLL UP1 Pull-up O 3.3
75 NMI High Fix I 3.4
76 NINTHOST ATAPI Interrupt I 0
77 NINTODC ODC Interrupt I 3.2
78 NINTADSC ADSC Interrupt I 3.3
79 NINTMPEG AV DecoderInterrupt I 3.3
80 HSLEEP Power-off Interrupt I 3.0
81 ADSEP (High Level Fixed) - 3.4
82 RST SystemReset I 3.3
83 33VDD +3.3V PowerSupply - 3.4
84 D0 CPU Data Bus I/O 1.1
85 D1 CPU Data Bus I/O 0.9
86 D2 CPU Data Bus I/O 1.4
87 D3 CPU Data Bus I/O 1.1
88 D4 CPU Data Bus I/O 1.5
89 D5 CPU Data Bus I/O 0.9
90 D6 CPU Data Bus I/O 1.4
91 D7 CPU Data Bus I/O 1.3
92 VSS GND - 0
93 D8 CPU Data Bus I/O 1.6
94 D9 CPU Data Bus I/O 1.5
95 D10 CPU Data Bus I/O 1.8
96 D11 CPU Data Bus I/O 1.0
97 D12 CPU Data Bus I/O 1.8
12

Pin
No. Port Description I/O (V)
98 D13 CPU Data Bus I/O 1.8
99 D14 CPU Data Bus I/O 2.0
100 D15 CPU Data Bus I/O 1.9
9. PACKAGE AND IC BLOCK DIAGRAM
9.1. Main/ Connector BlockIC101 : C1AB00000003
IC201 : C0ABBB000105
IC202 : C0JBAS000008
13

IC702 : C0CAAYG00005
IC401,901 : YEAMT7ST32UL
IC701 : AN8065SE1
14

IC851 : YEAM7200U33T
IC734 : C0DBFFG00004
IC731 : C0DBAZD00006
IC801 : C0FBBK000019
15

9.2. DVDServo Block IC303 : C3FBLG000012
IC101 : AN8703FH-V
IC204 : YEAMT7ST08UL
IC401 : C0GBY0000012
16

IC402 : C0GBH0000006
IC502 : C3ABPG000102
17

IC507 : C3BBHC000246
10. REPLACEMENT PARTS LIST
Notes :
1. Besure to make your orders of replacement parts according to
thislist.
2. Important safetynotice: Components, identified bymark have
special characteristics important for safety. When replacing any
of these components, use onlymanufacturer's specified parts.
3. Location keysinthe remarks column indicates the general
location of the parts showninthe exploded drawing, as inaroad
map.
4. The marking (RTL) indicates that Retention Time islimited for this
item. After the discontinuation of assemblyinproduction, the item
will continue to be availablefor aspecificperiod of time. The
retention period of availabilityisdependent on the type of
18

assembly, and inaccordance with the lawsgoverning part and
product retention. After the end of thisperiod, the assemblywill
no longer be available.
Ref. No. PartNo. PartName& Description Remarks
[E-6887A]Main Block
IC’sand TRANSISTORs
IC101 C1AB00000003 IC
IC201 C0ABBB000105 IC
IC202 C0JBAS000008 IC
IC401 YEAMT7ST32UL IC
IC601 C2DBKJ000084 IC
IC701 AN8065SE1 IC
IC702 C0CAAYG00005 IC
IC731 C0DBAZD00006 IC
IC734 C0DBFFG00004 IC
IC801 C0FBBK000019 IC
IC851 YEAM7200U33T IC
IC901 YEAMT7ST32UL IC
Q251 B1GBHBEA0004 Transistor
Q252 YEANA114TK Transistor
Q253 B1GDCFJJ0002 Transistor
Q254 YEANC114YKX Transistor
Q261 B1GBCFNN0004 Transistor
Q262 B1GBCFNN0004 Transistor
Q351 B1GBHBEA0004 Transistor
Q512 B1GBCFNL0001 Transistor
Q701 B1BBAC000007 Transistor
Q702 YEANHQ1F3PT1 Transistor
Q703 YEANC114YKX Transistor
Q704 B1BBAC000007 Transistor
Q705 YEANHQ1F3PT1 Transistor
Q706 YEANC114YKX Transistor
Q707 B1ABCF000042 Transistor
Q733 B1DFDG000006 Transistor
Q734 B1ABCF000042 Transistor
Q736 B1DFDG000006 Transistor
Q801 B1GBCFNN0004 Transistor
Q802 B1GBCFNN0004 Transistor
DIODEs
D211 MA721TX Diode
D251 B0ADCJ000020 Diode
D401 MA8056LMHTX Diode
D501 MA721TX Diode
D502 MA8056LMHTX Diode
D513 LNJ306G5TUWQ LED
D601 MA721TX Diode
D701 YEADDAM3MA47 Diode
D702 MA721TX Diode
D703 YEADRD56M3T1 Diode
19