Panasonic ES-WH90 User manual

© Panasonic Corporation, 2016. All rights reserved.
Unauthorized copying and distribution is a violation
of law.
Order Number PCD1604X60CE
IPL HAIR REMOVAL SYSTEM
Model No. ES-WH90
Europe
CIS
Middle East
Asia
TABLE OF CONTENTS PAGE PAGE
1 Warning-------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 5
5 Exploded View and Replacement Parts List ------------ 6

ES-WH90
2
1Warning
Caution:
- Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher.
Please use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C).
In case of using high temperature soldering iron, please be careful not to heat too long.
- Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).
2 Specifications
Power source 100-240V AC, 50-60Hz
Power consumption (when charging) Approx. 9W
Maximum times of flashing in a full single charge Approx. 600 flashes
Charging time Approx. 3 hours
Length of power cord Approx. 1.8 m
Weight Approx. 350 g (excluding cap)

ES-WH90
3
3 Troubleshooting Guide
3.1. Main unit and charging adaptor

ES-WH90
4

ES-WH90
5
4 Disassembly and Assembly Instructions
4.1. Disassembly method.
1. Remove the frame, lamp block and screw.
2. Remove the guard from frame by unfastening hooks.
3. Remove the rubber and five screws, and remove the
housing B.
4. Remove the batteries from main body.