Panasonic KX-PW32CL User manual

Personal Facsimile
Model No. KX-PW32CL
Quick Reference Guide for the Portable Hand Scanner
1
億
人
の
フ
ァ
ク
ス
Location of controls
送信
動作中
消去 メモリ
小さい
ふつう
写真 画質
電源
スタ-ト/

ストップ
Delete button
Used to delete the
scanned contents





Send button
Used to send the
scanned contents
to the main unit.
Operation indicator
Shows the condition of
the scanner.
Power indicator
· Shows if the power is on / off.
· Shows the amount of battery
power left.
Imaging
sensor
Rollers
Battery compartment
cover
Battery compartment
Infrared connection
window
Used to make infrared
connection with the main unit.
Start / Stop button
Used to start or stop
scanning.
Resolution button
Used when scanning
small letters or
photographs.
Resolution
indicator
Shows the
selected
resolution.
Memory indicator
Shows the amount of
memory being used.
Power button
Used to turn
on / off the power.
Installing the batteries
Battery compartment cover
Imaging sensor
1
2
3
1Slide open the battery cover by slightly pushing the
part strongly towards yourself.
●Do not touch the imaging sensor with your fingers.
●When changing the batteries, turn off the power of the hand scanner
and take out all the old batteries.
2Place 3 alkaline batteries in the battery
compartment, according to the
indication.
●Place the batteries in the order of
to .
3Close the battery compartment cover.
3
1
–
+

The batteries have run out. Replace with new alkaline batteries.
You can use the hand scanner continuously for about 90 minutes.
(When the operating environment is at room temperature 20°C, and using new Panasonic alkaline batteries.)
〜100％
Turning on / off the power
2
送信
動作中
消去 メモリ
小さい
ふつう
写真 画質
電源
スタ-ト/
ストップ
POWER
ON
電源
LIGHT
ON LIGHT OFF
POWER
OFF
電源

Power indicator
Hold the end
of the plug
and push it in.
1
To power outlet
(AC 100 V)
2
Hand scanner
exclusive AC adaptor
AC adaptor
connection terminal
Battery lifePower indicator
The hand scanner can also be used with the exclusive AC adaptor (not included / Model No. KX-FAN42).
You do not have to install batteries.
RED light FLASH
The batteries are weak. Replace with new alkaline batteries soon.
●If you continue to use the hand scanner in this condition, the scanned contents will be dark.
RED light ON
Light OFF
Press for at least 2 seconds until you hear a beep to
turn on the power.
➡The power indicator will light red.
●If you do not operate for about 3 minutes after you turn on the power, it
will turn off automatically. (AUTO POWER-OFF feature)
電源
■To turn off the power
➡Press for at least 2 seconds until you hear a beep.
電源
Battery life
Using the exclusive AC adaptor (not included)
Memory indicator Memory used
0％
〜33％
〜66％
(OFF)
(1 light ON)
(2 lights ON)
〜99％
(3 lights ON)
(3 lights FLASH)
Memory indicator
Shows the amount of scanner memory being used.
NOTE:
●When the scanner memory becomes full, you cannot scan new contents.
➡Delete the contents memorized in the scanner (see the back cover page).
●
The contents memorized in the scanner will not be deleted even when you turn off the power, or when the batteries run out.
Memory indicator

Scanning a document
3
送信
動作中
消去 メモリ
電源
スタ-ト/

ストップ
小さい
ふつう
写真
画質
小さい
ふつう
写真 画質
Operation
indicator
Arrow direction
Operation indicator
読取位置
原稿左端
スタ-ト/

ストップ
送信
動作中
消去 メモリ
小さい
ふつう
写真 画質
電源
スタ-ト/

ストップ
POWER
ON
電源
LIGHT
ON
1Press for at least 2 seconds until you hear
a beep to turn on the power.
➡The power indicator will light red.
電源
2Press repeatedly to choose the desired
resolution.
➡You will hear a beep, and the selected resolution indicator will light.
●Resolution types
· 小さい (FINE: For documents with small print)
· ふつう (STANDARD)
· 写真 (PHOTO: For documents containing photographs, etc.)
画質
3Place the Ò読取位置” (scanning position) and the
Ò原稿左端” (document left side) on the document,
and press .
➡You will hear a beep, and the operation indicator will light green
after about 1 or 2 seconds. You can start scanning after the
operation indicator lights green.
スタ-ト/
ストップ
4
Press the hand scanner against the document, and
move it slowly towards the direction of the arrow
().
➡
When it is scanning properly, the operation indicator will flash green.
●Scanning speed for different resolution types.
“ふつう”(STANDARD): Move up to 50mm per second.
“小さい” (FINE) “写真” (PHOTO): Move up to 25mm per second.
➡If the scanner is being moved too quickly, you will hear a warning
beep (p.4).
送信
動作中
消去 メモリ
小さい
ふつう
写真 画質
電源
スタ-ト/
ストップ
電源
POWER
OFF
LIGHT
OFF
Operation
indicator
スタ-ト/
ストップ
5After scanning the document, press .
➡You will hear a beep, and the operation indicator will turn off. The
document will be memorized as 1 page.
➡To continue scanning another page, repeat steps 2 to 5.
スタ-ト/
ストップ
6When you have finished scanning, press for at
least 2 seconds until you hear a beep to turn off the
power.
電源
Resolution “小さい” (FINE)................approx. 30 pages (document paper
size-B5, 700 letters)
Resolution “ふつう”(STANDARD)....approx. 60 pages (document paper
size-B5, 700 letters)
Resolution “写真” (PHOTO)...............approx. 2 pages (a B5-size
photograph)
Scanner memory capacity

➡
To start scanning again, press
.
スタ-ト/
ストップ
Hand scanner tray


➡
Scan the document as 2 pages, or more.
4
GREEN light
ON
Remedysituation
Warning
beep
Operation
indicator
No beep
The document is being scanned properly.
No beep
The hand scanner is temporarily stopped during
scanning
No beep
The hand scanner is being moved quickly.
(The document is being scanned.)
GREEN light
FLASH
RED light
ON
3 beeps
The scanner memory is full.
(3 lights will FLASH on the memory indicator)
You have scanned a document that is more than
1.5m in length as 1 page.
Light OFF
1 beep
The hand scanner is being moved too quickly.
(Some parts of the document may not be scanned, or
the scanned contents may be too compressed.)
RED light
ON
➡
You can start scanning again by moving
the hand scanner.
➡
Move it more slowly.
➡
Move it more slowly.
➡
Delete the contents memorized in the
scanner (see the back cover page).
1 short
beep
You did not move the hand scanner for more than 30
seconds, so it has stopped scanning automatically.
(The scanned document will be stored as 1 page.)
GREEN light
from ON to OFF

Operation
indicator
スタ-ト/
ストップ
When scanning a document, check the the operation indicator
light.
Operation indicator and Warning beep
Infrared connection to the main unit

Place the infrared connection windows
of the hand scanner and the main unit
together.
trough
1Pull out the hand scanner tray by
lightly pressing the center part.
●Move the tray slowly so as not to scratch the
placed surface.
To print the memorized contents, you must send them to the main unit by infrared connection.
2Place the hand scanner in the trough
of the tray.
●If the hand scanner is not placed in the right
position, when you try to send the memorized
contents to the main unit, you will hear a
beep and will be displayed.
You will not be able to send the contents.
●Do not allow connection windows to become dirty
or damaged, and do not place tape or stickers on
the windows.
ｽｷｬﾅｰ ﾂｳｼﾝ ｴﾗｰ

5
Printing all pages of memorized content
1Press for at least 2 seconds to turn on the
power.
2Place the hand scanner on the tray, and press
.
➡The number of memorized pages will be displayed for about 2
minutes on the main unit LCD display.
3Press while the number of memorized pages
is being displayed.
➡Printing will start.
スタート
/コピー
送信
電源
NOTE:
●
When you want to stop printing, press .
●
You can not make a phone call while printing.
ストップ
Printing a specific page of memorized content
1Press for at least 2 seconds to turn on the
power.
2Place the hand scanner on the tray, and press
.
➡The number of memorized pages will be displayed for about 2
minutes on the main unit LCD display.
3Press while the number of memorized pages
is being displayed.
4Rotate until is displayed.
5Press
.
6Enter the number of the first page that you want to
print using 2 digits.
●Example: To print from page 7, press .
●When you have misenterd, press
and reenter.
7Press
.
8Enter the number of the last page that you want to
print using 2 digits.
●Example:To print until page 10, press .
●When you have misenterd, press
and reenter.
9Press
.
➡Printing will start.
スタート
/コピー
0
1
スタート
/コピー
07
スタート
/コピー
ﾍﾟｰｼﾞ ｼﾃｲ ｲﾝｼﾞ
[ｽﾀｰﾄ]
くるくる電話帳

ハンドスキャナー

送信

電源

NOTE:
●
To print a single page, enter the same
page number at step 6 and step 8.

電源
スタート
/コピー
ストップ
送信
LCD display

電源
スタート
/コピー
くるくる電話帳
キャッチ／クリア
ハンドスキャナー
送信
LCD display
キャッチ/クリア

キャッチ/クリア


1Press for at least 2 seconds to turn on the
power.
2Place the hand scanner on the tray, and press
.
➡The number of memorized pages will be displayed for about 2
minutes on the main unit LCD display.
3Press while the number of memorized pages
is being displayed.
4■When sending all pages:
Rotate until is displayed then go
to step 9.
■When sending a specific pages:
Rotate until is displayed then go
to step 5.
5Press
.
6Enter the number of the first page that you want to send using 2
digits.
●Example:To send from page 7, press .
●If you make a mistake, press
and reenter.
7Press
.
8Enter the number of the last page that you want to send using 2
digits.
●Example:To send until page 10, press .
●If you make a mistake, press
and reenter.
9Press
.
10
Make a call.
スタート
/コピー
0
1
スタート
/コピー
07
スタート
/コピー
ﾍﾟｰｼﾞ ｼﾃｲ ｿｳｼﾝ
[ｽﾀｰﾄ]
くるくる電話帳

ｲｯｶﾂ ｿｳｼﾝ
[ｽﾀｰﾄ]
くるくる電話帳

ハンドスキャナー

送信

電源

Fax Sending memorized content
You can choose whether to send all the pages of memorized content, or whether to send a specific page. If
you wish to send all the pages, skip steps 5 to 8.

電源
スタート
/コピー
くるくる電話帳
ハンドスキャナー
キャッチ／クリア
送信
LCD display
キャッチ/クリア

Deleting memorized content
消去
■Deleting all pages
1Press for at least 2 seconds to turn on the
power.
2Place the hand scanner on the tray, and press
.
3Press while the number of memorized
pages is being displayed.
4Rotate until is displayed.
5Press
.
スタート
/コピー
ｲｯｶﾂ ｼｮｳｷｮ
[ｽﾀｰﾄ]
くるくる電話帳

ハンドスキャナー

送信

電源

■Deleting the last page
1Press for about 2
seconds until you hear
a beep.
消去
Kyushu Matsushita Electric Co.,Ltd.
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan PFQX1429ZA WK0400NK0
キャッチ/クリア