Panasonic SA-PT660P User manual

Main unit SA-PT660P/PC
O
OO
OGENERAL
Power supply: AC 120 V, 60 Hz
Power consumption: This unit 135 W
Power consumption in standby mode:
approx. 0.3 W
Dimensions (W×H×D): 430 mm×63 mm×327 mm(16-
15/16” X 2-15/32” X 12-7/8”)
Mass: This unit 3.7 kg (8.2lbs)
Operating temperature range: +0 °C to +40 °C
(+32 °F to +104 °F)
Operating humidity range: 35 % to 80 % RH
(no condensation)
O
OO
OAMPLIFIER SECTION
RMS Output Power: Dolby Digital Mode
Front Ch:
125 W per channel (3 Ω), 1 kHz, 10% THD
Surround Ch:
125 W per channel (3 Ω), 1 kHz, 10% THD
© 2008 Matsushita Electric Industrial Co. Ltd.. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
SA-PT660P
SA-PT660PC
Colour
(K).......................Black Type
Center Ch:
250 W per channel (6 Ω), 1 kHz, 10% THD
Subwoofer Ch:
250 W per channel (6 Ω), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power:
1000 W
FTC Output Power: Dolby Digital Mode
Front Ch:
63 W per channel (3 Ω), 120Hz to 20 kHz, 1% THD
Surround Ch:
34 W per channel (3 Ω), 120Hz to 20 kHz, 1% THD
Center Ch:
113 W per channel (6 Ω), 120Hz to 20 kHz, 1% THD
Subwoofer Ch:
121 W per channel (6 Ω), 45 Hz to120 Hz, 1 % THD
Total FTC Dolby Digital mode power:
428 W
O
OO
OFM TUNER, TERMINALS SECTION
DVD Home Theater Sound System
Notes: This model’s CD/DVD mechanism is CR14. Please refer to the original service manual (Order No.
MD0801004CE) for this mechanism.
Specifications
ORDER NO. MD0802005CE
A6

Preset Memory: FM 30 stations
AM 30 stations
Frequency Modulation (FM)
Frequency range:
87.90-107.90 MHz (200-kHz step)
87.50-108.00 MHz (100-kHz step)
Antenna terminals: 75 Ω(unbalanced)
Amplitude Modulation (AM)
520kHz to 1710kHz (10-kHz step)
Digital audio input
Optical digital input: Optical terminal
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Phone jack
Terminal: Stereo, 3.5 mm (1/8”) jack
O
OO
ODISC SECTION
Discs played [8 cm (3”) or 12 cm (5”)]:
(1) DVD (DVD-Video)
(2) DVD-RAM (DVD-VR, MP3*2, 5, JPEG*4, 5 )
(3) DVD-R (DVD-Video, DVD-VR, MP3*2, 5, JPEG*4, 5 )
(4) DVD-R DL (DVD-Video, DVD-VR)
(5) DVD-RW (DVD-Video, DVD-VR, MP3*2, 5, JPEG*4, 5)
(6) +R/+RW (Video)
(7) +R DL (Video)
(8) CD, CD-R/RW [CD-DA, Video CD, SVCD*1,MP3
*2, 5,WMA *3,
5, JPEG*4, 5]
*1 Conforming to IEC62107
*2 MPEG-1 Layer 3, MPEG-2 Layer 3
*3 Windows Media Audio Ver.9.0 L3
ONot compatible with Multiple Bit Rate (MBR)
*4 Exif Ver 2.1 JPEG Baseline files
OPicture resolution: between 160 x 120 and 6144 x 4096
pixels (Sub sampling is 4:0:0, 4:2:0, 4:2:2 or 4:4:4).
Extremely long and narrow pictures may not be displayed.
*5 The total combined maximum number of recognizable audio
and picture contents and groups: 4000 audio and picture
contents and 400 groups.
Pick up
Wavelength (DVD/CD): 655/785 nm
Laser power (DVD/CD): CLASS 1/CLASS 1M (Canada)
CLASS II/CLASS I (U.S.A)
Audio output (Disc)
Number of channels: 5.1ch(FL,FR,C,SL,SR,
SW)
O
OO
OVIDEO SECTION
Video system: NTSC
Composite video output
Output level: 1Vp-p(75Ω)
Terminal: Pin jack (1 system)
Component Video Output
O
OO
OY output level: 1Vp-p(75Ω)
O
OO
OPBoutput level: 0.7Vp-p(75Ω)
O
OO
OPRoutput level: 0.7Vp-p(75Ω)
O
OO
OTerminal: Pin jack (Y: green, PB:blue,
PR:red)(1system)
HDMI AV output
Terminal: 19pin type A connector
HDAVI Control:
This unit supports “HDAVI Control 3” function.
Note:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Solder:
This model uses lead free solder (PbF).
Mechanism:
This model uses CR14 mechanism.
Wireless Features (optional):
This model supports multi-room wireless sound system
(eg.SH-FX85).
Refer to their respective original service manuals for *1.
2
SA-PT660P / SA-PT660PC

1 Safety Precautions 5
1.1. GENERAL GUIDELINES 5
1.2. Before Repair and Adjustment 5
1.3. Protection Circuitry 6
1.4. Safety Parts Information 6
2 Prevention of Electrostatic Discharge (ESD) to
Electrostatically Sensitive (ES) Devices 8
3 Precaution of Laser Diode 9
4 About Lead Free Solder (PbF) 10
4.1. Service caution based on legal restrictions 10
5 Handling Precautions for Traverse Unit 11
5.1. Cautions to Be Taken in Handling the Optical Pickup Unit
11
5.2. Grounding for electrostatic breakdown prevention 11
6 Accessories 13
7 Operation Procedures 14
7.1. Remote Control Key Buttons Operations 14
7.2. Main Unit Key Buttons Operations 15
7.3. Using the VIERA Link “HDAVI Control™” 16
7.4. Using the iPod 18
7.5. Audio and Video Connection 20
7.6. Disc Information 22
8 Self-Diagnosis and Special Mode Setting 24
8.1. Service Mode Summary Table 24
8.2. Service Mode Table (For DVD) 24
8.3. Service Mode Table (For CR14) 32
8.4. Wireless Service Mode Summary Table 34
8.5. Service Mode Table (Wireless) 35
8.6. DVD Self Diagnostic Function-Error Code 37
8.7. Sales Demonstration Lock Function 41
8.8. Service Precautions 42
9 Assembling and Disassembling 44
9.1. Disassembly Flow Chart 46
9.2. Main Components and P.C.B. Locations 47
9.3. Disassembly of Top Cabinet 48
9.4. Disassembly of Rear Panel 48
9.5. Disassembly of DVD Mechanism Unit 48
9.6. Disassembly of Front Panel 49
9.7. Disassembly of Panel P.C.B. 50
9.8. Disassembly of Power/Disc Button P.C.B. 50
9.9. Disassembly of DVD Lid 50
9.10. Disassembly of Ipod Cradle P.C.B. 51
9.11. Disassembly of AC Inlet P.C.B. 52
9.12. Disassembly of Main P.C.B. 53
9.13. Disassembly of D-Amp P.C.B. 54
9.14. Replacement of Digital Amp IC (IC5000) 55
9.15. Replacement of Digital Amp IC (IC5200) 56
9.16. Replacement of Digital Amp IC (IC5300) 57
9.17. Replacement of Digital Amp IC (IC5400) 59
9.18. Disassembly of SMPS P.C.B. 60
9.19. Replacement of Switch Regulator IC (IC5701) 60
9.20. Replacement of Switch Regulator Diode (D5702) 61
9.21. Replacement of Regulator Diode (D5801) 63
9.22. Replacement of Regulator Diode (D5802) 63
9.23. Replacement of Regulator Diode (D5803) 64
9.24. Disassembly of Power Supply P.C.B. 65
9.25. Replacement of Regulator IC (IC2903) 66
9.26. Disassembly of DVD Module P.C.B. 67
9.27. Disassembly of Coprocessor P.C.B. 68
9.28. Disassembly of Wireless Adapter P.C.B. 68
10 Assembling and Disassembling of DVD Mechanism Unit 70
10.1. Disassembling of TRV unit 70
10.2. Assembly of TRV unit 70
11 Service Fixture and Tools 72
12 Service Position 73
12.1. Checking & Repairing Main P.C.B. 73
12.2. Checking & Repairing D-Amp P.C.B. 73
12.3. Checking & Repairing SMPS P.C.B. 75
12.4. Checking & Repairing Power Supply P.C.B. 75
12.5. Checking & Repairing DVD Module P.C.B. 76
13 Measurements and Adjustments 79
13.1. Service Tools and Equipment 79
13.2. Important points in adjustment 79
13.3. Storing and handling of test discs 79
13.4. Optical adjustment 80
14 Voltage and Waveform Chart 81
14.1. DVD Module P.C.B. 81
14.2. D-Amp P.C.B. 83
14.3. Main P.C.B. 84
14.4. Panel P.C.B. 85
CONTENTS
Page Page
3
SA-PT660P / SA-PT660PC

14.5. Power Supply P.C.B. 85
14.6. SMPS P.C.B. 86
14.7. Waveform Chart 87
15 Illustration of IC’s, Transistors and Diodes 90
16 Wiring Connection Diagram 91
17 Block Diagram 93
17.1. System Control 93
17.2. DVD (Servo) 94
17.3. DVD (Audio) 95
17.4. DVD (HDMI) 96
17.5. VIDEO 97
17.6. Audio 98
17.7. Digital Audio Amp 99
17.8. Power 100
18 Schematic Diagram Notes 101
19 Schematic Diagram 103
19.1. DVD Module Circuit 103
19.2. Main Circuit 108
19.3. Panel, Power/Disc Button Circuit 112
19.4. D-Amp Circuit 113
19.5. Power Supply Circuit 115
19.6. SMPS Circuit 117
19.7. AC Inlet, Ipod Cradle Circuit 119
19.8. Coprocessor, Wireless Adapter Circuit 120
20 Printed Circuit Board 121
20.1. DVD Module P.C.B. 121
20.2. Main P.C.B. 122
20.3. Panel, Power/Disc Button, Power Supply & AC Inlet
P.C.B. 123
20.4. D-Amp P.C.B. 124
20.5. SMPS P.C.B. 125
20.6. Ipod Cradle, Coprocessor & Wireless Adapter P.C.B. 126
21 Basic Troubleshooting Guide 127
21.1. Troubleshooting Guide for F61 and/or F76 127
21.2. Basic Troubleshooting Guide for Traverse Unit (DVD
Module P.C.B.) 133
21.3. Basic Troubleshooting Guide for HDMI AV Output 134
22 Overall Simplified Block for PT660 137
22.1. SMPS Module & Power Supply Block 138
23 Terminal Function of ICs 139
23.1. IC2001 (RFKWPT760P): IC System Control 139
23.2. IC1701 (MFI341S2095): IC Ipod Video 139
23.3. IC6901(C0HBB0000057): IC FL Driver 140
24 Exploded Views 141
24.1. Cabinet Parts Location 141
24.2. Packaging 142
25 Replacement Parts List 143
25.1. Component Parts List 144
26 Schematic Diagram for printing with letter size 159
4
SA-PT660P / SA-PT660PC

1 Safety Precautions
1.1. GENERAL GUIDELINES
1.When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or
damaged by the short circuit.
2.After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly
installed.
3.After servicing, carry out the following leakage current checks to prevent the customer from being exposed to shock hazards.
1.1.1. LEAKAGE CURRENT COLD CHECK
1.Unplug the AC cord and connect a jumper between the two prongs on the plug.
2.Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each exposed metallic cabinet part on
the equipment such as screwheads, connectors, control shafts, etc. When the exposed metallic part has a return path to the
chassis, the reading should be between 1MΩand 5.2MΩ.
When the exposed metal does not have a return path to the chassis, the reading must be
1.1.2. LEAKAGE CURRENT HOT CHECK
1.Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check.
2.Connect a 1.5kΩ, 10 watts resistor, in parallel with a 0.15µF capacitors, between each exposed metallic part on the set and a
good earth ground such as a water pipe, as shown in Figure 1.
3.Use an AC voltmeter, with 1000 ohms/volt or more sensitivity, to measure the potential across the resistor.
4.Check each exposed metallic part, and measure the voltage at each point.
5.Reverse the AC plug in the AC outlet and repeat each of the above measurements.
6.The potential at any point should not exceed 0.75 volts RMS. A leakage current tester (Simpson Model 229 or equivalent) may
be used to make the hot checks, leakage current must not exceed 1/2 milliamp. In case a measurement is outside of the limits
specified, there is a possibility of a shock hazard, and the equipment should be repaired and rechecked before it is returned to
the customer.
Figure 1
1.2. Before Repair and Adjustment
Disconnect AC power to discharge unit AC Capacitors as such C5700, C5701, C5703, C5704, C5705 through a 10 Ω,10W
resistor to ground.
Caution:
DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices.
After repairs are completed, restore power gradually using a variac, to avoid overcurrent.
Current consumption at AC 120 V, 60 Hz in NO SIGNAL mode volume minimal should be ~ 900 mA.
5
SA-PT660P / SA-PT660PC

1.2.1. Caution for fuse replacement
1.3. Protection Circuitry
The protection circuitry may have operated if either of the following conditions are noticed:
• • •
• No sound is heard when the power is turned on.
• • •
• Sound stops during a performance.
The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are
“shorted”, or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used.
If this occurs, follow the procedure outlines below:
1.Turn off the power.
2.Determine the cause of the problem and correct it.
3.Turn on the power once again after one minute.
Note:
When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again.
1.4. Safety Parts Information
Safety Parts List:
There are special components used in this equipment which are important for safety.
These parts are marked by in the Schematic Diagrams & Replacement Parts List. It is essential that these critical parts
should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards. Do not modify the original design
without permission of manufacturer.
Table 1
Ref. No. Part No. Part Name & Description Remarks
12 REXX0640-J BLACK WIRE (AC TO SMPS) [M]
13 REXX0641-J RED WIRE (AC TO SMPS) [M]
23 RGRX0067KA1A REAR PANEL [M] P
23 RGRX0067K-B1 REAR PANEL [M] PC
66 RKMX0141-K TOP CABINET [M]
84 J0KD00000126 FERRITE CORE [M]
PCB3 REPX0622A SMPS P.C.B [M] (RTL)
PCB4 REPX0622A AC INLET P.C.B [M] (RTL)
DZ5701 ERZV10V511CS ZNR [M]
T2900 G4D1A0000117 SWITCHING TRANSFORMER [M]
T5701 ETS42BM18GAD SWITCHING TRANSFORMER [M]
T5751 ETS19AB256AG SWITCHING TRANSFORMER [M]
PC5701 B3PBA0000402 PHOTO COUPLER [M]
PC5702 B3PBA0000402 PHOTO COUPLER [M]
PC5720 B3PBA0000402 PHOTO COUPLER [M]
PC5799 B3PBA0000402 PHOTO COUPLER [M]
F1 K5D802APA008 FUSE [M]
FP2901 K5G401A00008 FUSE PROTECTOR [M]
TH5701 D4CAA5R10001 THERMISTOR [M]
TH5860 D4CC11040013 THERMISTOR [M]
P5701 K2AB2B000010 AC INLET [M]
A2 K2CB2CB00021 AC CORD [M]
C5700 F1BAF1020020 1000pF [M]
C5701 F0CAF334A087 0.33uF [M]
C5703 F0CAF224A085 0.22uF [M]
C5704 F1BAF1020020 1000pF [M]
6
SA-PT660P / SA-PT660PC

Ref. No. Part No. Part Name & Description Remarks
C5705 F1BAF1020020 1000pF [M]
7
SA-PT660P / SA-PT660PC

2 Prevention of Electrostatic Discharge (ESD) to
Electrostatically Sensitive (ES) Devices
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called
Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and
semiconductor "chip" components. The following techniques should be used to help reduce the incidence of component damage
caused by electrostatic discharge (ESD).
1.Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your
body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap,
which should be removed for potential shock reasons prior to applying power to the unit under test.
2.After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as
aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.
3.Use only a grounded-tip soldering iron to solder or unsolder ES devices.
4.Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static (ESD protected)" can
generate electrical charge sufficient to damage ES devices.
5.Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.
6.Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most
replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable
conductive material).
7.Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material
to the chassis or circuit assembly into which the device will be installed.
Caution:
Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
8.Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the
brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD)
sufficient to damage an ES device).
8
SA-PT660P / SA-PT660PC

3 Precaution of Laser Diode
CAUTION :
This product utilizes a laser diode with the unit turned "on", invisible laser radiation is emitted from the pickup lens.
Wavelength: 655 nm (DVD)/785 nm (CD)
Maximum output radiation power from pickup: 100 µW/VDE
Laser radiation from the pickup unit is safety level, but be sure the followings:
1.Do not disassemble the pickup unit, since radiation from exposed laser diode is dangerous.
2.Do not adjust the variable resistor on the pickup unit. It was already adjusted.
3.Do not look at the focus lens using optical instruments.
4.Recommend not to look at pickup lens for a long time.
9
SA-PT660P / SA-PT660PC

4 About Lead Free Solder (PbF)
4.1. Service caution based on legal restrictions
4.1.1. General description about Lead Free Solder (PbF)
The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this
equipment in considering the globally environmental conservation.
The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin
(Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30 degrees C (86°F) more than that
of the normal solder.
Definition of PCB Lead Free Solder being used
The letter of “PbF” is printed either foil side or components side on the PCB using the lead free solder.
(See right figure)
Service caution for repair work using Lead Free Solder (PbF)
• • •
• The lead free solder has to be used when repairing the equipment for which the lead free solder is used.
(Definition: The letter of “PbF” is printed on the PCB using the lead free solder.)
• • •
• To put lead free solder, it should be well molten and mixed with the original lead free solder.
• • •
• Remove the remaining lead free solder on the PCB cleanly for soldering of the new IC.
• • •
• Since the melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt
the lead free solder.
• • •
• Use the soldering iron (more than 70W) equipped with the temperature control after setting the temperature at 350±30
degrees C (662±86°F).
Recommended Lead Free Solder (Service Parts Route.)
• • •
• The following 3 types of lead free solder are available through the service parts route.
RFKZ03D01K-----------(0.3mm 100g Reel)
RFKZ06D01K-----------(0.6mm 100g Reel)
RFKZ10D01K-----------(1.0mm 100g Reel)
Note
* Ingredient: tin (Sn), 96.5%, silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1 to 0.3%
10
SA-PT660P / SA-PT660PC

5 Handling Precautions for Traverse Unit
The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be
taken avoid caution to electrostatic breakdown when servicing and handling the laser diode in the traverse unit.
5.1. Cautions to Be Taken in Handling the Optical Pickup Unit
The laser diode in the optical pickup unit may be damaged due to electrostatic discharge generating from clothes or human body.
Special care must be taken avoid caution to electrostatic discharge damage when servicing the laser diode.
1.Do not give a considerable shock to the optical pickup unit as it has an extremely high-precise structure.
2.To prevent the laser diode from the electrostatic discharge damage, the flexible cable of the optical pickup unit removed should
be short-circuited with a short pin or a clip.
3.The flexible cable may be cut off if an excessive force is applied to it. Use caution when handling the flexible cable.
4.The antistatic FPC is connected to the new optical pickup unit. After replacing the optical pickup unit and connecting the flexible
cable, cut off the antistatic FPC.
5.2. Grounding for electrostatic breakdown prevention
Some devices such as the DVD player use the optical pickup (laser diode) and the optical pickup will be damaged by static
electricity in the working environment. Proceed servicing works under the working environment where grounding works is
completed.
5.2.1. Worktable grounding
1.Put a conductive material (sheet) or iron sheet on the area where the optical pickup is placed, and ground the sheet.
5.2.2. Human body grounding
1.Use the anti-static wrist strap to discharge the static electricity form your body.
11
SA-PT660P / SA-PT660PC

12
SA-PT660P / SA-PT660PC

Remote control
AC power supply cord
Video cable
AM loop antenna
FM indoor antenna
6 Accessories
• • •
• Note: Refer to “Replacement Parts List” (Section 25) for the part number.
13
SA-PT660P / SA-PT660PC

7 Operation Procedures
7.1. Remote Control Key Buttons Operations
3
5
6
8
11
9
2
10
12
7
21
24
22
23
25
13
18
20
15
1
4
19
Turn the main unit on/off
Select channels and title numbers etc. / Enter numbers
Select a disc / Play all loaded CDs sequentially
Select preset radio stations
Basic operations for play
Show a disc top menu or program list
Select or confirm menu items / Frame-by-frame
Show a disc menu or play list
Show on screen menu
Turn Dolby Pro Logic II on/off
Cancel
Turn Whisper-mode Surround on/off
TV operations
Aim the remote control at the Panasonic TV and press the
button.
[ TV]: Turn the TV on/off
[TV/VIDEO]: Change the TV s video input mode
[+ , - ]: Adjust the TV volume
This may not work properly with some models.
Select iPod as the source
16
Select FM/AM tuner or external audio as the source
17
Start up and play a disc automatically
Adjust the volume of the main unit
Select radio stations manually
Show START menu
Return to previous screen / Show setup menu
Switch information on the main units display
Select the play mode / Set the repeat mode
Mute the sound
MUTING flashes on the main unit s display while the
function is on.
To cancel, press the button again or adjust the volume.
Muting is canceled when you switch the unit to standby.
Adjust the subwoofer level or select speaker channel
This function is available only when using
the optional Panasonic wireless sound system
SH-FX85.
[ 2ND S ELECT]
: Press and hold the button to
change the source for the second room;
MAIN SOURCE (follows the selected source for
the main room) (FM AM)*IPOD Return
to MAIN SOURCE
*If the main room is in FM/AM mode, you can only
select the same mode for the FM/AM tuner
of the second room.
For details, refer to the operating instructions for the
optional Panasonic wireless sound system SH-FX85.
[-DVD] Select disc as the source : DVD/CD
14
DVD/CD FM AM AUX D-IN
^^
or
Set the Sleep timer
Press and hold [ SLEEP].
While the time is shown on the main unit ’sdisplay, press the
[ SLEEP] repeatedly.
OFF (Cancel)
To confirm the remaining time, press and hold the button again.
Select the play mode / Set the repeat mode
Mute the sound
"MUTING" flashes on the main unit s display while the function is
on.
To cancel, press the button again or adjust the volume.
Muting is canceled when you switch the unit to standby
Adjust the subwoofer level or select speaker channel
- SLEEP - REPEAT
-
FL DISPLAY
- PLAY MODE
VOL
OK
MUTING SUB WOOFER
- CH SELECT
FUNCTIONS
CANCEL SOUND
TOP MENU
MENU
DIRECT
NAVIGATOR
START
PLAY
LIST
- RETURN
- SETUP
SLOW/ SEARCH
PLAYPAU S ESTOP
SKIP
- CD
MODE
123
456
789
0
10
FM/AM/
EXT-IN
TV/VIDEO
VO L
iPod
TV
- W. S .
PL
114
15
16
17
18
20
21
22
24
19
2
4
5
6
7
8
9
11
10
12
23
25
13
3
LEVEL
DISC
ONE TOUCH PLAY
- DV D
-
2ND SELECT
SLEEP 30 SLEEP 60 SLEEP 90 SLEEP120
Avoiding interference with other Panasonic equipment
Other Panasonic audio/video equipment may start functioning
when you operate the unit using the supplied remote control.
You can operate this unit in another mode by setting the
remote control operating mode to "REMOTE 2".
The main unit and remote control must be set to the
same mode.
1 Press and hold [ ] on the main unit and [2]
on the remote control until the main unit’s display
shows "REMOTE 2".
2 Press and hold [OK] and [2] on the remote control
for at least 2 seconds.
To change the mode back to "REMOTE 1", repeat both
steps above by replacing [2] with [1].
/
14
SA-PT660P / SA-PT660PC

7.2. Main Unit Key Buttons Operations
14
13
8
9
11
12
10
1
4
3
6
5
7
2
Stand by/on switch [POWER / ]
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
5 DISC SELECTOR
Select a disc directly
Disc exchange
Open the disc tray to exchange the disc.
Open/Close the disc tray
Turn Subwoofer Boost on/off
Select the source
DVD/CD FM AM AUX D-IN IPOD
Skip or slow-search play / Select the radio stations
Stop playing / Select the tuning mode / Adjust the FM
reception condition
Play discs / Memorize the receiving radio stations
Connect iPod
Remote control signal sensor
Display
Adjust the volume of the main unit
Connect headphones (no t included)
Headphone plug type: 3.5 mm (
1
/ 8 z) stereo mini plug
Reduce the volume before connecting.
Audio is automatically switched to 2-channel stereo.
To prevent hearing damage, avoid listening for
prolonged periods of time.
^^
VOLUME
POWER
POWER
SELECTOR TUNE
MEMORY TUNE MODE FM MODE
SW
BOOST
OPEN CLOSE
5 DISC
SELECTOR EXCHANGE
12345
13 14
1 43 6 8 9
11 12
SW
BOOST
OPENCLOSE
10
5 72
15
SA-PT660P / SA-PT660PC

7.3. Using the VIERA Link “HDAVI Control™”
VIERA Link HD AVI Control
VIERA Link
TM
is a new name for EZ Sync
TM
.
VIERA Link HDAVI Control is a convenient function that offers linked
operations of this unit, and a Panasonic TV (VIERA) under HDAVI
Control . You can use this function by connecting the equipment with the
HDMI cable. See the operating instructions for connected equipment for
operational details.
VIERA Link HDAVI Control , based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers equipment that
supports HDMI CEC cannot be guaranteed.
This unit supports HDAVI Control 3 function.
HDAVI Control 3 is the newest standard (current as of December,
2007) for Panasonic s HDAVI Control compatible equipment. This
standard is compatible with Panasonic s conventional HDAVI
equipment.
Please refer to individual manuals for other manufacturers equipment
supporting VIERA Link function.
The TV with HDAVI Control 2 (or later) function enables the following
operation: VIERA Link Control only with TV s remote control [for
HDAVI Control 2 (or later) ]
Preparation
Confirm that the HDMI connection has been made
Set VIERA Link to ON
To complete and activate the connection correctly, turn on all VIERA
Link HDAVI Control compatible equipment and set the TV to the
corresponding HDMI input mode for this unit.
Setting the TV audio for VIERA Link HD AVI Control
Select between
AUX and D-IN to work with the linked operations.
Confirm the audio connection to the
AUX terminal (for AUX ) or
OPTICAL IN terminal (for D-IN )
1 Press [ , SELECT] to select
AUX or D-IN .
2 Press [SETUP] to select TV AUDIO , then press [ , ] to switch
AUX or D-IN .
Whenever the connection or settings are changed, reconfirm the points
above.
Automatic setup
The settings for TV ASPECT
*1
and LANGUAGE
*2
automatically follow to the settings of the TV.
(This may not work if the corresponding setting you have made for
your TV is not available on this unit.)
*1
When using VIERA Link HDAVI Control with HDAVI Control 3
compatible TV
*2
When using VIERA Link HDAVI Control with HDAVI Control 2
(or later) compatible TV
You can turn on this unit and the TV, and start playing the disc with a
single press of a button.
This function also works if you press [ PLAY] on this unit s remote
control when this unit is in standby mode.
Playback may not be immediately displayed on the TV. If you miss the
beginning portion of playback, press [ ] or [ ] to go back to where
playback started.
When you switch the TV input to TV tuner mode, this unit will
automatically switch to
AUX
*
or D-IN
*
. (This does not work when this
unit is in IPOD mode.)
When you start disc play, the TV will automatically switch its input mode
for this unit.
When the TV is turned off, this unit goes into standby mode automatically.
This function works only when DVD/CD ,
AUX
*
or D-IN
*
is selected
as the source on this unit.
When the TV is turned on, this unit does not turn on automatically.
(Power on link is not available.)
When you press [ ], only this unit turns off. Other connected equipment
compatible with VIERA Link HDAVI Control stays on.
*
“ AUX ”or “D-IN”(“DIGITAL IN”) works depending on the “TV AUDIO”
setting ( above, Setting the TV audio for VIERA Link “HDAVI
Control”).
One touch play
To start disc playback.
This unit s speakers will be automatically
activated
Auto input switching
Power off link
ONE TOUCH PLAY
will
^ ^
Note
Note
-
SLEEP
-
REPEAT
- FL DISPLAY -
PLAY MODE
VOL
OK
MUTING SUBWOOFER
- CH SELECT
FUNCTIONS
CANCEL SOUND LEVEL
TOP MENU
MENU
DIRECT
NAVIGATOR
START
PLAY
LIST
-
RETURN
-
SETUP
SLOW/SEARCH
PLAYPAUSESTOP
SKIP
- CD
MODE
123
456
789
0
10
ONETOUCH PLAY
FM/AM/
EXT-IN
TV/VIDEO
VOL
iPod
TV
- DVD
-
2ND SELECT
-
W. S.
PL
DISC
SLOW/SEARCH
PLAY
ONE TOUCH PLAY
SETUP
SKIP
FM/AM/EXT-IN
16
SA-PT660P / SA-PT660PC

You can select whether audio is output from this unit s speakers or the TV
speakers by using the TV menu settings. For details, refer to the operating
instructions of your TV.
Home theater
This unit s speakers are active.
When this unit is in standby mode, changing the TV speakers to this
unit s speakers in the TV menu will automatically turn this unit on and
select
AUX
*
or D-IN
* as the source.
The TV speakers are automatically muted.
You can control the volume setting using the volume or mute button on
the TV s remote control. (The volume level is displayed on the main
unit s FL display.)
To cancel muting, you can also use this unit s remote control
If you turn off this unit, TV speakers will be automatically activated.
TV
TV speakers are active.
The volume of this unit is set to 0 .
This function works only when DVD/CD , AUX
*
or D-IN
§
is selected
as the source on this unit.
Audio output is 2-channel audio.
When switching between this unit speakers and TV speakers, the TV
screen may be blank for several seconds.
You can control the playback menus of this unit with the TV s remote
control. When operating the TV s remote control, refer to the below
illustration for operation buttons.
1 Select this unit s operation menu by using the TV menu settings.
(For details, refer to the operating instructions of your TV.)
The START menu will be shown.
e.g. DVD-V
The START menu can also be shown by using a button on the TV s
remote control (e.g. [SUB MENU]).
When
DVD/CD is selected as the source, this works only during
stop mode.
This does not work while iPod music playback screen is displayed
on the TV.
2 Select the desired item on the START menu
When the on-screen control panel appears
e.g. DVD-V (when Playback Disc is selected from the START menu.)
You can operate the playback with the indicated controls.
The on-screen control panel can also be shown by using a button on the
TV s remote control (e.g. [SUB MENU]).
This works only during
DVD/CD playback and resume modes or,
while iPod music playback screen is displayed on the TV.
Depending on the menu, some button operations cannot be performed
from the TV s remote control.
You cannot input numbers with the numbered buttons on the TV s
remote control ([0] to [9]). Use this unit s remote control to select the
play list etc.
Speaker control VIERA Link Control only with TV s remote
control [for HD AVI Control 2 (or later) ]
DVD/CD Home theater
OK
RETURN
Input select
Playback Disc
TOP MENU (DVD)
MENU (DVD)
Playback/menu
access
SEARCH
RETURN
SEARCH
PLAY
PAUSE
STOP
Note
17
SA-PT660P / SA-PT660PC

7.4. Using the iPod
- Op
To view photos/videos from the iPod
- Ensure the video connection to the VIDEO CUT terminal
on this unit
erate the iPod menu to make the appropriate photo/
video output settings for your TV. (Refer to operating
instructions of your iPod.)
To display the picture, turn on the TV and select the
appropriate video input mode.
Before connecting/disconnecting the iPod, turn this unit
off or reduce the volume of this unit to its minimum.
Connect the iPod (not included) firmly.
Recharging starts when the iPod is inserted.
Hold the dock when connecting/disconnecting the iPod.
To operate through display of iPod, press [FUNCTIONS].
Play starts from the selected song.
Select "IPOD".
The iPod automatically switches to
this unit’s display mode.
Music menu appears on the TV.
iPod/USB
iPod Home Cinema
OK
Playlists
Ar tists
Alb ums
Songs
Podcasts
Genres
Composer s
Audiobooks
e.g.
Enjo ying m usic
Select an item.
Press [ ] to skip page by page.
To return to the previous screen,
press [RETURN].
OK
RETURN
iPod Home Cinema
Good mornin g
Ronaldo
Happy da ys
3/ 20
2:43 -1:15
e.g.
Song
Artist
Album
Playback condition
Shuffle mode 1
Repeat mode
Current position
Attach the dock adapter which should be supplied with your
iPod to the dock for the stable use of the iPod.
If you need an adpter, consult your iPod dealer.
Preparation
2
1To select shuffle modes
Each time you press the button:
: Song shuffle
: Album shuffle
Off: Cancel
Press PLAY MODE
[]
2To select repeat modes
Press and hold and then press the button
repeatedly within 3 seconds.
Each time you press the button:
: Repeat 1 track
: Repeat all
Off: Cancel
REPEAT
[]
Main unit
iPod
Dock for iPod
e.g.
Dock adapter
(not included)
18
SA-PT660P / SA-PT660PC

You can also use the remote control to operate iPod
menu.
[]: To navigate menu items
[OK]: To go to the next menu
[RETURN]: To return to the previous menu
You can enjoy surround sound effect when you press
[ ] to turn on Dolby Pro Logic II
When using the START menu in "IPOD" mode
Select "Music" or "Photos/Videos".
Music: Shows the music menu.
Photos/Videos: Switches to display of iPod.
About recharging the battery
iPod will start recharging regardless of whether this unit
is on or off.
"IPOD " will be shown on this unit’s display during
iPod charging in this unit standby mode.
Check iPod to see if the battery is fully recharged.
If you are not using iPod for an extended period of time
after recharging has completed, disconnect it from this
unit, as the battery will be depleted naturally. (Once fully
recharged, additional recharging will not occur.)
Compatible iPod
iPod touch (8GB, 16GB)
iPod nano 3rd generation (video) (4GB, 8GB)
iPod classic (80GB, 160GB)
iPod nano 2nd generation (aluminum) (2GB, 4GB, 8GB)
iPod 5th generation (video) (60GB, 80GB)
iPod 5th generation (video) (30GB)
iPod nano 1st generation (1GB, 2GB, 4GB)
iPod 4th generation (color display) (40GB, 60GB)
iPod 4th generation (color display) (20GB, 30GB)
iPod 4th generation (40GB)
iPod 4th generation (20GB)
iPod mini (4GB, 6GB)
Compatibility depends on the software version of your
iPod.
Enjoying photos/videos
1
Switch the iPod to its own display
mode.
Proceed operations through display
of iPod.
2
Play a slideshow or video on your iPod.
The picture will be displayed on your TV.
Basic controls (For music and videos only)
Button Function
[ PLAY] Play
[STOP], PAUSE] Pause
[] Skip
(press and hold)
[]
Search
19
SA-PT660P / SA-PT660PC

7.5. Audio and Video Connection
7.5.1. Basic Setup
Basic setup example
AUDIO OUT
L
R
AUDIO IN
L
R
RF IN
VIDEO INVIDEO OUT
RF OUT
RF IN
COMPONENT VIDEO OUT
R P
P B Y
L
R
AUX
VIDEO OUT
COMPONENT VIDEO OUT
R P
P B Y
L
R
AUX
VIDEO OUT
Cable TV box or video cassette recorder
(not included)
Main unit
Audio cable
(not included)
You can enjoy audio from your TV,
video cassette recorder or cable TV
programs through this home theater
system by connecting to the AUX
terminals. Select AUX as the
source
TV (not included)
To your cable TV
service or TV antenna
RF cable (not included)
Video cable
(included)
7.5.2. Connecting to a Television with HDMI & Component Video Out Terminal
TV terminal Cable req uired
(not includ ed) Main u nit t ermin al Featu res
[Note]
Non-HDMI-compliant cables
cannot be utilized.
It is recommended that you use
Panasonic s HDMI cable.
Recommended part number:
RP-CDHG15 (1.5 m/4.9 ft),
RP-CDHG30 (3.0 m/9.8 ft),
RP-CDHG50 (5.0 m/16.4 ft), etc.
HDMI
This connection provides the best picture quality.
Set VIDEO PRIORITY to ON
Set VIDEO FORMAT in Menu 4 (HDMI)
VIERA Link HD AVI Control
If your Panasonic TV is an HDMI control compatible, you
can operate your TV synchronizing with home theater
operations or vice versa
Make the audio connection when you use
VIERA Link HDAVI Control function.
All Panasonic
televisions that have
480p input connectors
are compatible. Consult
the manufacturer if you
have another brand of
TV.
COMPONENT VIDEO
Connect to terminals
of the same color.
This connection provides a much purer picture than the
VIDEO OUT terminal.
After making this connection, select DARKER from
the BLACK LEVEL in the VIDEO menu.
To enjoy pr ogres sive vide o
Connect to a progressive output compatible TV.
Set VIDEO OUT (I/P) in VIDEO menu to
PROGRESSIVE and then follow the instructions on
the menu screen.
AV IN
HDMI cable
COMPONENT
VIDEO IN
P R
P B
Y
Video cables
VIDEO OUT
P B Y
COMPONENT VIDEO OUT
R P
Note
Do not make the video conn ection s through t he video cassette recorder.
Due to copy guard protection, the picture may not be displayed properly.
Only one video connection is required. Choose one of the video connections above depending on your TV.
20
SA-PT660P / SA-PT660PC